MeshScan: a Fast and Efficient Handoff Scheme for IEEE 802.11 Wireless Mesh Networks

As a next generation network solution, Wireless Mesh Networks (WMN) provides fast Internet access to a large area, which is from university campus to city scale. In order to provide an uninterrupted Internet experience to a mobile client, a process called handoff is required to maintain the network connection from one Mesh Node (MN) to another MN. Ideally, handoff should be completely transparent to mobile users. A critical application like VoIP will require a handoff capability that transfers a call from one mesh node (MN) to another in less than 50 msec. However the current IEEE 802.11 standards do not address the handoff well. Studies have revealed that standard handoff on IEEE 802.11 WLANs incurs a latency of the order of hundreds of milliseconds to several seconds. Moreover, the discovery step in the handoff process accounts for more than 99% of this latency. The study addresses the latency in the discovery step by introducing an efficient and powerful client-side scan technique called MeshScan which replaces the discovery step with a unicast scan that transmits Authentication Request frames to potential MNs. A prototype of MeshScan has been developed based on the MadWifi WLAN driver on Linux operating systems. The feasibility of MeshScan to support fast handoff in WMNs has been demonstrated through extensive computer simulations and experiments under same given conditions. The results from the simulations and experiments show that the latency associated with handoff can be reduced from seconds to a few milliseconds by using the MeshScan technique. Furthermore, it is shown that MeshScan can continue to function effectively even under heavy traffic loads

IEEE 802.11s Mesh Deterministic Access : Design and analysis

IEEE 802.11s is a draft IEEE 802.11 amendment for mesh networking, defining how wireless devices can interconnect to create an ad-hoc network. It includes some mesh-specific optional MAC enhancements like Mesh Deterministic Access, Common Channel Framework, Intra-mesh Congestion Control and Power Management. Mesh Deterministic Access (MDA) is an access method that allows MPs to access the channel at selected times (called MDAOPs) with lower contention than would otherwise be possible. In this work we study Mesh Deterministic Access (MDA) feature. Specifically: we implement 802.11s in ns-2 simulator and evaluate performance comparing results with those obtained with DCF. We also propose an improvement called Dynamic Relocation. Dynamic Relocation permits to overcome MDA limits by reallocating MDAOPs basing on statistics collected during transmission times. The effectiveness of MDA improved with Dynamic Relocation in a scenario with realistic traffic is then confirmed via a simulation analysis

Multicast Mobility in Mobile IP Version 6 (MIPv6) : Problem Statement and Brief Survey

Publisher PD

Improving Multicast Communications Over Wireless Mesh Networks

In wireless mesh networks (WMNs) the traditional approach to shortest path tree based multicasting is to cater for the needs of the poorest performingnode i.e. the maximum permitted multicast line rate is limited to the lowest line rate used by the individual Child nodes on a branch. In general, this meansfixing the line rate to its minimum value and fixing the transmit power to its maximum permitted value. This simplistic approach of applying a single multicast rate for all nodes in the multicast group results in a sub-optimal trade-off between the mean network throughput and coverage area that does not allow for high bandwidth multimedia applications to be supported. By relaxing this constraint and allowing multiple line rates to be used, the mean network throughput can be improved. This thesis presents two methods that aim to increase the mean network throughput through the use of multiple line rates by the forwarding nodes. This is achieved by identifying the Child nodes responsible for reducing the multicast group rate. The first method identifies specific locations for the placement of relay nodes which allows for higher multicast branch line rates to be used. The second method uses a power control algorithm to tune the transmit power to allow for higher multicast branch line rates. The use of power control also helps to reduce the interference caused to neighbouring nodes.Through extensive computer simulation it can be shown that these two methods can lead to a four-fold gain in the mean network throughput undertypical WMN operating conditions compared with the single line rate case

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

A comparative investigation on the application and performance of Femtocell against Wi-Fi networks in an indoor environment

Due to the strenuous demands on the available spectrum and bandwidth, alongside the ever increasing rate at which data traffic is growing and the poor quality of experience QoE) faced with indoor communications, in order for cellular networks to remain dominant in areas pertaining to voice and data services, cellular service providers have to reform their marketing and service delivery strategies together with their overall network rchitecture. To accomplish this leap forward in performance, cellular service operators need to employ a network topology, which makes use of a mix of macrocells and small cells, effectively evolving the network, bringing it closer to the end-­‐user. This investigation explores the use of small cell technology, specifically Femtocell technology in comparison to the already employed Wi-­‐Fi technology as a viable solution to poor indoor communications.The performance evolution is done by comparing key areas in the every day use of Internet communications. These include HTTP testing, RTP testing and VoIP testing. Results are explained and the modes of operation of both technologies are compared