Towards certifiable reconfigurable real-time mission critical software systems

This thesis makes a contribution towards the certification of reconfigurable real-time mission critical software systems. In highly reconfigurable software systems it is possible for a situation to arise where the system expends most or all of its resources on reconfiguring, and thus cannot provide sufficient resources to conduct intended computing functions. This anomaly has been termed "configuration thrashing" by the author due to its loose analogy to memory thrashing. If configuration thrashing is not eliminated, or at least minimised, then it is possible for circumstance to occur where reconfigurable systems cannot be certified due to potential failure to meet deadlines caused by configuration thrashing. The elimination of reconfiguration thrashing is a step towards certifiable dynamic reconfigurable systems capable of enforcing deadlines. The elimination of reconfiguration thrashing is necessary, though not sufficient, for this goal. In order to restrict configuration thrashing it is necessary to understand the possibilities available within reconfigurable software. A VDM-SL model is presented to explore the options available for reconfigurable architectures, and has allowed many operators to be formally specified providing a much greater understanding of the tasks involved in reconfiguration. The thesis demonstrates how model checkers can be used to check software processes for configuration thrashing using predefined CSP models, thus allowing system programmers to engineer configuration thrashing out of systems. However, model checkers are susceptible to state space explosion, particularly if models are large and / or complex, which may make the use of the model checkers impractical or even impossible for some systems. The thesis therefore also explores potential run-time solutions to configuration thrashing. These solutions allow developers to include additional logic / processes within their systems in order to eliminate configuration thrashing (without the use of model checkers). Several options are explored in-depth, from providing mechanisms for developers to choose when reconfiguration can / cannot occur, to a rule based solution. The exploration of the rule based solution explores issues such as rule expression, rule predictability, as well as potential core rules. The two approaches taken within this thesis to eliminate, or at least restrict sufficiently, configuration thrashing form a basis which would allow for the certification of reconfigurable real-time mission critical software systems.EThOS - Electronic Theses Online ServiceBAE SystemsGBUnited Kingdo

Open architecture control system for a modular reconfigurable machine tool.

M.Sc.Eng. University of KwaZulu-Natal, Durban 2013.The present day manufacturing environment has forced manufacturing systems to be flexible and adaptable to be able to match the product demands and frequent introduction of new products and technologies. This research forms part of a greater research initiative that looks at the development of the reconfigurable manufacturing paradigm. Previous research has shown that the lack of development of a Modular Reconfigurable Manufacturing Tools (MRMT) and Open Architecture Control System (OACS) is currently a key limiting factor to the establishment of Reconfigurable Manufacturing Systems (RMS), which has been the primary motivation for this research. Open Architecture (OA) systems aim to bring the ideas of RMS to control systems for machining systems. An OA system incorporates vendor neutrality, portability, extendibility, scalability and modularity. The research has proposed, designed and developed a novel solution that incorporates these core principles allowing the system to be flexible in mechanical and control architectures. In doing so, the system can be reconfigured at any time to match the specific manufacturing functionality required at that time thereby prolonging the lifecycle of the machine via multiple reconfigurations over time, in addition to decreasing the cost of system modifications due to a well-defined modular system. The reconfiguration and machining variance is achieved by the introduction of mechanical and control modules that extend the Degrees of Freedom (DOF’s) available to the system. The OACS has been developed as a modular solution that links closely to the existing mechanical modularity on the RMT to maximize the reconfigurability of the system. The aim was to create a one to one link between mechanical and electronic hardware and the software system. This has been achieved by the addition of microcontroller based distributed modules which acts as the interface between the electro-mechanical machine axes via hardwired signals and the host PC via the CAN bus communication interface. The distributed modules have been developed on different microcontrollers, which have successfully demonstrated the openness and customizability of the system. On the host PC, the user is presented with a GUI that allows the user to configure the control system based on the MRMT physical configuration. The underlying software algorithms such as, text Interpretation, linear interpolation, PID or PI controllers and determination of kinematic viability are part of the OACS and are used at run time for machine operation. The machining and control performance of the system is evaluated on the previously developed MRMT. The performance evaluation also covers the analysis of the reconfigurability and scalability of the system. The research is concluded with a presentation based on conclusions drawn from the research covering the challenges, limitations and problems that OA and RMS can face before MRMT become readily available for industry

Developing Next-Generation Engineers -. IMPACTS

In the development of remote labs and virtual engineering tools the focus has rightly been on the technical challenges to be overcome to provide useful and usable tools and experimentation. However, the utilization of such facilities in educational settings is not simply a case of making students and faculty aware of their existence. In fact, there are significant pedagogical issues in the blending of remote and virtual facilities with cohort and location-based teaching and learning, and a number of research findings have highlighted student issues with both traditional teaching methods and the use of predominantly on-line materials. The authors have considerable experience in the development, production and use of eLearning materials in academic and industrial environments, and in tool virtualization and remote labs, and here propose a model for a distributed Masters program that supports students on a location-neutral basis utilizing online eLearning materials, virtual tools and remote lab facilities, combined with location-specific specialist teaching and learning facilities. The program described is already in operation between three European Universities, with the intention to expand both within Europe and beyond, utilizing the Erasmus Mundus scheme. The program is based on a constructivist pedagogic model that demands considerable independence of study and research on the part of the students, within a rich environment of high-quality specialist materials offered in a wide variety of modes. The authors believe that this approach optimizes the benefits of individual academic specialization in research and teaching, combined with effective use of eLearning materials, remote labs and virtual tools in a distributed environment, and thereby addresses a number of the issues identified from the research while also offering a high quality program to educate and develop next generation Engineers

E-health-IoT Universe: A Review

The Internet of Things (IoT) devices are able to collect and share data directly with other devices through the cloud environment, providing a huge amount of information to be gathered, stored and analyzed for data-analytics processes. The scenarios in which the IoT devices may be useful are amazing varying, from automotive, to industrial automation or remote monitoring of domestic environment. Furthermore, has been proved that healthcare applications represent an important field of interest for IoT devices, due to the capability of improving the access to care, reducing the cost of healthcare and most importantly increasing the quality of life of the patients. In this paper, we analyze the state-of-art of IoT in medical environment, illustrating an extended range of IoT-driven healthcare applications that, however, still need innovative and high technology-based solutions to be considered ready to market. In particular, problems regarding characteristics of response-time and precision will be examined.  Furthermore, wearable and energy saving properties will be investigated in this paper and also the IT architectures able to ensure security and privacy during the all data-transmission process. Finally, considerations about data mining applications, such as risks prediction, classification and clustering will be provided, that are considered fundamental issues to ensure the accuracy of the care processes

Reconfigurable Computing Based on Commercial FPGAs. Solutions for the Design and Implementation of Partially Reconfigurable Systems = Computación reconfigurable basada en FPGAs comerciales. Soluciones para el diseño e implementación de sistemas parcialmente reconfigurables.

Esta tesis doctoral está enmarcada en el campo de investigación de la computación reconfigurable. Este campo ha experimentado un crecimiento abrumador en los últimos años como resultado de la evolución de los dispositivos reconfigurables, donde las Field Programmable Gate Arrays (FPGAs) son el máximo exponente desde el punto de vista comercial. De forma tradicional las empresas de electrónica han seleccionado las FPGAs como prototipos iníciales de productos de altas prestaciones. Luego el sistema final es integrado en Application Specific Integrated Circuits (ASICs) que se producen en grandes volúmenes perimiendo amortiza su alto coste de diseño y producción y aprovechando la ventaja del bajo coste por unidad. Por otro lado, los DSPs (Digital Signal Processing) y los microprocesadores han sido preferidos por su bajo coste ante las FPGAs el campo de los dispositivos con menores requisitos de cómputo. En los últimos años, este panorama está sufriendo una serie de cambios. Ahora el mercado busca mas soluciones “reconfigurables” ya que permiten reducir el tiempo de salida del producto al mercado (time-to-market), aumentar el tiempo del producto en el mercado (time-in-market) y además cubren los amplios requisitos de cómputo. El cambio que se observa, se debe a que los dispositivos programables han evolucionado de simples estructuras programables a complejas plataformas reconfigurables. Las FPGAs del estado de la técnica han alcanzado un grado de integración muy alto y además ahora contienen, dentro de su arquitectura programable, microprocesadores y lógica específica de procesamiento digital de señal. Otro factor sumamente importante para el cambio es que las FPGAs permiten el diseño de dispositivos cuyo hardware pueden ser adaptado, o actualizado, una vez que el producto ya esta entregado e instalado, obteniendo así una flexibilidad en el hardware comparable con la del software, donde la actualización postventa de los sistemas es una práctica muy explotada de cara a la reducción de costes y la salida rápida al mercado. Por otro lado, y sobre todo en el ámbito académico, existen dispositivos reconfigurables con distinta granularidad que permites alcanzar altas prestaciones en comparación con las FPGAs comerciales de grano fino (comparable con la de los ASICs), pero están restringidas a una aplicación o grupo de aplicaciones. A pesar de que los dispositivos reconfigurables propietarios ofrecen muchas ventajas, esta opción ha sido descartada en la presente tesis debido a que, desde el punto de vista industrial requieren, aparte del diseño del ASIC reconfigurable, el desarrollo de un entorno de diseño completo. Todo esto conlleva a un elevado coste de recursos, además del alejamiento de las propuestas de la industria. La presente tesis se ha centrado en proporcionar soluciones para dispositivos comerciales, FPGAs de grano fino, con la finalidad de aprovechar las herramientas existentes y mantener las soluciones propuestas lo más cerca posible de la industria. Los dispositivos reconfigurables proporcionan diversos métodos de reconfiguración, siendo el más atractivo la reconfiguración parcial y dinámica, ya que permite adaptar el dispositivo sin interrumpir su funcionamiento y crear dispositivos auto-adaptables. Este tipo de reconfiguración será el objeto de estudio de la tesis doctoral. La reconfiguración parcial permite tener una serie de tareas hardware (módulos que se ubican en la estructura reconfigurable) ejecutándose paralelamente en la FPGA y sustituir un bloque por otro, dependiendo de las necesidades del sistema, sin alterar el funcionamiento del resto de bloques. Esta idea básica en teoría brinda la flexibilidad del software al hardware, que combinado con su paralelismo implícito hace del sistema reconfigurable una potente herramienta que puede dar pie a la creación de sistemas adaptables o incluso autoadaptativos, supercomputadores reconfigurables y hardware bio-inspirado entre otros. Por otro lado, a pesar que algunos proveedores de FPGAs permiten la reconfiguración parcial, el uso de esta técnica aún está restringido al ámbito académico y a sistemas muy básicos. El trabajo de investigación descrito dentro de la presente tesis doctoral ha tenido por objeto el estudio de diversos aspectos de los sistemas parcialmente reconfigurables, la identificación de las principales deficiencias de las soluciones existentes y la propuesta de nuevas soluciones originales. Como resultado del estudio del estado del arte se ha visto que las soluciones existentes son poco flexibles y la escalabilidad de los sistemas que se pueden diseñar es reducida. Por ello las propuestas originales de esta tesis tienen como objetivo permitir el diseño e implementación de sistemas parcialmente reconfigurables con alta escalabilidad y flexibilidad. La tesis principal del trabajo de investigación ha sido basada en la idea que para obtener una mayor flexibilidad de los sistemas se debe desligar el diseño del sistema reconfigurable del diseño de los cores que serán consumidos por dicho sistema. La tesis doctoral ha contribuido proponiendo mejores soluciones a nivel de arquitectura, flujos de diseño y herramientas que han permitido el diseño e implementación de diversos sistemas parcialmente reconfigurables con distinto grado de flexibilidad y escalabilidad. La flexibilidad y la escalabilidad son términos que en los sistemas reconfigurables se pueden asociar a diversos aspectos. Dentro de esta tesis la flexibilidad está asociada principalmente a la diversidad de cores o tareas hardware que pueden ser consumidos o integrados en un sistema ya definido, mientras que la escalabilidad está referida al número de cores que pueden coexistir en el sistema y ser reconfigurados independientemente. Para poder diseñar sistemas flexibles y escalables, estas características deben estar cubiertas en distintos niveles. Más en detalle dentro de la presente tesis, desde el punto de vista de la arquitectura, la flexibilidad está cubierta por la posibilidad de posicionar libremente cores en una arquitectura escalable predefinida. Desde el punto de vista del sistema, la flexibilidad está reflejada por la posibilidad de no sólo de modificar o reconfigurar un core del sistema hardware, sino también de modificar las comunicaciones internas del mismo. Desde el punto de vista del dispositivo, la flexibilidad está garantizada por la transparencia en el proceso de reconfiguración. Por último, la flexibilidad en el proceso de diseño está cubierta por la definición de herramientas y flujos de diseño que permiten por un lado desligar el diseño del sistema reconfigurable del diseño de los cores para el sistema, y por otro lado que diseñadores sin conocimientos detallados de reconfiguración parcial puedan diseñar cores. Dentro de la tesis doctoral se presentan cuatro dispositivos reconfigurable integrados en distintos entornos y con distinto grado de flexibilidad que corresponde al grado de aprovechamiento de las aportaciones originales de la tesis. Las principales aportaciones de la tesis doctoral, relacionadas a cada uno de los aspectos mencionados en el párrafo anterior, y tratados en distintas partes de la tesis se resumen a continuación destacando en la medida de lo posible las diferencias con respecto al estado del arte: Se ha definido una metodología de diseño de Arquitecturas Virtuales (abstracción de la arquitectura física de la FPGA que incluye la distribución de los recursos programables en slots y la forma de interconexión de los slots). La metodología, propuesta originalmente en esta tesis, permite el diseño de sistemas reconfigurables con alta flexibilidad y escalabilidad comparadas con el estado del arte. Una solución a la adaptación de las comunicaciones internas en los sistemas reconfigurables llamada DRNoC (Dynamic Reconfigurable NoC). La solución original abarca diversos aspectos e incluye la definición de una arquitectura de interconexión para los sistemas reconfigurables basada en redes en chip (Network on Chip - NoC), la definición de métodos de reconfiguración y el direccionamiento interno del sistema, y de forma más específica para las comunicaciones basadas en redes, la definición de un formato de tramas y la arquitectura de los enrutadores. La principal diferencia de la solución propuesta con el estado del arte es que DRNoC no restringe la comunicación únicamente a NoCs y permite la definición de cualquier tipo de esquema de comunicación (NoC, punto a punto, punto a multipunto, bus, o una combinación de las anteriores) y además, permite que varios esquemas de comunicación coexistan en el mismo sistema y que funcionen de forma independiente. De esta forma la solución propuesta brinda una mayor flexibilidad que las ya existentes. Se ha propuesto una solución para la manipulación de los ficheros de configuración para las FPGA del tipo Virtex II/Pro que es la más completa comparada con el estado del arte. Asimismo, una serie de herramientas que permiten la generación y extracción de cores para sistemas reconfigurables basados en FPGA Virtex II que ha sido la primera solución existente para estas FPGA. Un flujo de diseño para cores basado en plantillas que permite el diseño de cores hardware sin ser un experto en reconfiguración parcial y sin conocer los detalles del sistema final en el que se implementará el core. El diseño, implementación y prueba de un sistema parcialmente reconfigurable basado en FPGAs comerciales de grano fino para redes de sensores. La primera aproximación existente en el estado del arte al uso de los sistemas parcialmente reconfigurables en las redes de sensores. La integración de un sistema reconfigurable en un entorno cliente-servidor que incluye un original sistema de control de la reconfiguración. Una solución para la depuración de los sistemas reconfigurables. Un sistema de emulación y prototipado rápido de las comunicaciones dentro de un chip basado originalmente en la idea de la reutilización de cores hardware por medio de la técnica de reconfiguración parcial. Como conclusión global del trabajo de investigación realizado cabe destacar que la presente tesis ha dado lugar a la creación y consolidación de una línea de investigación en el grupo de electrónica digital del Centro de Electrónica Industrial que actualmente se encuentra entre las más activas y de mayor importancia. Además, el trabajo de investigación y la divulgación de las aportaciones originales han permitido que el centro de investigación pase a formar parte del estado del arte de los sistemas parcialmente reconfigurables. The thesis is enclosed in the research area of reconfigurable computing which, in the last years, has experienced a remarkable growth as a result of the impressive evolution of reconfigurable devices. In this area, Field Programmable Gate Arrays (FPGAs) are the most outstanding representative from the commercial point of view. Traditionally FPGAs have been used for prototyping, in previous to the final Application Specific Integrated Circuit (ASIC) design stages. However, the interest in the integration of FPGAs in final products has been growing in the last years. FPGAs are preferred for small production volumes, where the ASIC masks high cost is unaffordable and also in products where time-to-market is a priority, and waiting for a complete ASIC design cycle is not desirable. State of the art FPGAs are highly integrated electronic circuits, composed of tens of millions of system gates, with competitive speed, performance and configurability. These devices have evolved from simple gate arrays to complex platforms that include embedded memory, multipliers and even microprocessors and digital signal processing elements. Additionally, the fine grain nature of the reconfigurable arrays, make FPGAs suitable for a broad set of application domains. On the other side, and mostly in the academic community, there are custom reconfigurable devices with different granularity levels that permit to achieve higher performance, compared to commercial FPGAs, but for a certain application domain. Although there are very good solutions in the academic state of the art, their main drawback from the industry point of view is that they require specific design environments and also, that the efforts and resources needed for designing such solutions are very high. This thesis work is focused on providing solutions that target commercial fine grain reconfigurable devices, FPGAs, in order to take advantage of existing tools and to keep the proposed solutions closer to the industry. Today FPGAs provide different reconfiguration options. Among them, the most challenging one is partial reconfiguration. This feature has special interest, as it permits system updates on the fly once the device is deployed, without the need of stopping it and without theoretical loss of performance. Partial reconfiguration is also an attractive feature because it permits to allocate different tasks/cores running in parallel in the device and change them on the fly as needed without disturbing other tasks/cores. This basic idea, brings software-like flexibility to hardware which, in combination with its inherited parallelism, opens the door for a broad amount of possibilities and applications, like runtime adaptive super-computing, adaptive embedded software ii accelerators, bio-inspired, self-reconfigurable and self-arrangeable systems. However, even though some commercial FPGAs provide partial reconfiguration features, its utilization is still in its early stages and it is not well supported by FPGA vendors, making its exploitation in real electronic systems very difficult. Therefore, there are several academic groups working to provide alternative solutions for the design and implementation of partially reconfigurable systems based on commercial FPGAs that intend to stimulate their integration and use in the industry. This research work intents to study different aspects of partially reconfigurable system on-chip and contribute with flexibility improvements. The main idea that will be followed along the thesis is that the design of reconfigurable systems will be considered an independent process from the design of cores that will be consumed by the system. This approach involves the design of flexible and scalable partial runtime reconfigurable systems, where most of the thesis contribution will be focused. More in detail, this thesis will contribute to improve architecture solutions, design tools and design flows of partially reconfigurable systems for commercial FPGAs and provide systems with higher flexibility and scalability. Flexibility and scalability in a reconfigurable system are terms that can be related to several aspects. In this thesis flexibility is mainly related to the diversity of tasks or cores a system can consume, while scalability is connected to the number of cores that can run in parallel and be independently reconfigured. Flexibility and scalability have to be covered by the system at different levels and the work presented in this thesis will contribute in all the specific levels. More in detail, from an architectural point of view, flexibility is reflected by the possibility of freely loading tasks or cores in a defined, scalable architecture. From the system point of view, flexibility is related to the possibility of modifying not only the system functionality by loading different tasks, but also to adapt the on-chip communications. From the device point of view, flexibility is reflected by the reconfiguration process transparency and, from the design point of view, it is oriented to the definition of design tools and flows that will permit, as far as possible, non specialized designers to design cores for a partially reconfigurable system and without knowing the system details. All the original proposed solutions, in each individual aspect, will be compared with the state of the art and complete systems solutions will be designed and will be integrated in different application domains in order to validate the thesis proposals. In order to achieve better understanding of the thesis and to facilitate the comparison with some, selected, related work, the thesis structure is not traditional. Instead of including a state of the art and a result Chapter, each Chapter is focused on a specific aspect of partially reconfigurable system design and includes state of the art and result sections. The first chapter, Chapter 1, introduces the main concepts to be used in the thesis. Chapter 2 is focused on reconfigurable systems architectures, contributing with architecture solutions and a design method. Chapter 3 proposes a solution that enhances the features of the architectures defined in Chapter 2, and provides more flexibility to the entire system by extending reconfiguration to the on-chip communication. Chapter 4 is related to the design flows and tools, where contributions are made in both aspects and the proposed solutions are compared with the state of the Abstract and Thesis Organization iii art. Complete systems, with different independency levels, are presented in Chapter 5 in order to validate the thesis contributions. Conclusions, a summary of contributions and the future work are included in Chapter 6. A more detailed description of each Chapter content is presented below: Chapter 1 provides an introduction to the reconfigurable systems based on FPGAs topic, by first defining the place of FPGAs in the electronic industry and afterwards, introducing the main concepts to be used along the thesis. Although the focus is put on commercial reconfigurable devices, some custom reconfigurable systems are also described in order to have a complete view of the options in reconfigurable devices. The Chapter discuses the thesis main topic, related to partial runtime reconfigurable systems, highlighting its main advantages and disadvantages and, introducing some of the approaches to be followed in this thesis. The main term introduced in this Chapter, associated to reconfigurable systems architectures, is ”Virtual Architecture”. The term defines the architecture of the partially reconfigurable system and how the different regions it is composed of are interconnected. A brief summary of the thesis main goals is included at the end of the Chapter. The main topic of Chapter 2 is related to reconfigurable systems architectures design. The Chapter includes a specific state of the art section that reviews some existing architecture solutions. After that, a general method for virtual architectures design, an original thesis contribution, is presented in detail. Afterwards, the method is applied to the design of general one dimensional (1D) and two dimensional (2D) architectures for Xilinx Virtex II/Pro FPGAs and, as an example, following the specific steps of the method, two 1D, bus based, architectures are designed. The architecture buses are compared with two state of the art solutions in terms of area and performance in the results section of the same Chapter. Chapter 3 is focused on reconfigurable systems on-chip communication issues, where the need of adaptability is the main topic. Again, a state of the art description of some 2D reconfigurable systems is presented at the beginning of the Chapter and, afterwards, an original solution, called Dynamic Reconfigurable NoC (DRNoC), is proposed. This solution covers different aspects. First, an architecture oriented to support adaptability in the on-chip communications is originally proposed. The architecture is mapped to a Virtex II FPGA by modifying a virtual architecture from the general ones presented in Chapter 2. Second, two types of reconfigurations that span through different levels of the OSI communication model are originally proposed. Third, a set of Network on Chip models, focused on the communication adaptability are designed and/or adapted and presented in the Chapter, along with an original NoC packet format and router architecture. These models are mapped to the DRNoC architecture and implementation cost parameters are defined and used to evaluate different implementation options. Regarding the architecture reconfigurability, it is important to remark that along the entire Chapter, intermediate test of possible partial reconfigurations and test results are included. At the end of the Chapter, the proposed architecture is compared with the state of the art using a set of structural parameters taken from a reference work and complemented with others defined in the Chapter. Chapter 4, focuses on the design tools and flows for partially reconfigurable systems. Again, an overview of the state of the art is included at the beginning of the Chapter. Abstract and Thesis Organization iv Afterwards, an original software solution for Virtex II configuration files (bitstreams) manipulations is presented. The first part of the solution is a study of the Virtex II/Pro FPGA bitstream format, used to define a set of equations for accessing a specific bitstream resource (at register or block level). Based on these equations, a set of tools for bitstream manipulation that target resource restricted devices are originally presented. Also, a design flow, based on systems and virtual architectures templates, which permits a straightforward core design by non partial reconfiguration experts and without knowing the system details, is originally proposed. In Chapter 5 four reconfigurable systems with different flexibility level, which corresponds to the level of the thesis proposals exploitation, are presented. The selected application domains attempt to demonstrate different advantages of the use of partial runtime reconfigurable systems and therefore are mainly a proof of concept. The first domain belongs to the wireless sensor networks, where t

Convergent Communication, Sensing and Localization in 6G Systems: An Overview of Technologies, Opportunities and Challenges

Herein, we focus on convergent 6G communication, localization and sensing systems by identifying key technology enablers, discussing their underlying challenges, implementation issues, and recommending potential solutions. Moreover, we discuss exciting new opportunities for integrated localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Regarding potential enabling technologies, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler, and angular resolutions, as well as localization to cm-level degree of accuracy. Besides, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. As a result, 6G will be truly intelligent wireless systems that will provide not only ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency, and space. This work concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust