Error resilience and concealment techniques for high-efficiency video coding

This thesis investigates the problem of robust coding and error concealment in High Efficiency Video Coding (HEVC). After a review of the current state of the art, a simulation study about error robustness, revealed that the HEVC has weak protection against network losses with significant impact on video quality degradation. Based on this evidence, the first contribution of this work is a new method to reduce the temporal dependencies between motion vectors, by improving the decoded video quality without compromising the compression efficiency. The second contribution of this thesis is a two-stage approach for reducing the mismatch of temporal predictions in case of video streams received with errors or lost data. At the encoding stage, the reference pictures are dynamically distributed based on a constrained Lagrangian rate-distortion optimization to reduce the number of predictions from a single reference. At the streaming stage, a prioritization algorithm, based on spatial dependencies, selects a reduced set of motion vectors to be transmitted, as side information, to reduce mismatched motion predictions at the decoder. The problem of error concealment-aware video coding is also investigated to enhance the overall error robustness. A new approach based on scalable coding and optimally error concealment selection is proposed, where the optimal error concealment modes are found by simulating transmission losses, followed by a saliency-weighted optimisation. Moreover, recovery residual information is encoded using a rate-controlled enhancement layer. Both are transmitted to the decoder to be used in case of data loss. Finally, an adaptive error resilience scheme is proposed to dynamically predict the video stream that achieves the highest decoded quality for a particular loss case. A neural network selects among the various video streams, encoded with different levels of compression efficiency and error protection, based on information from the video signal, the coded stream and the transmission network. Overall, the new robust video coding methods investigated in this thesis yield consistent quality gains in comparison with other existing methods and also the ones implemented in the HEVC reference software. Furthermore, the trade-off between coding efficiency and error robustness is also better in the proposed methods

Intelligent Side Information Generation in Distributed Video Coding

Distributed video coding (DVC) reverses the traditional coding paradigm of complex encoders allied with basic decoding to one where the computational cost is largely incurred by the decoder. This is attractive as the proven theoretical work of Wyner-Ziv (WZ) and Slepian-Wolf (SW) shows that the performance by such a system should be exactly the same as a conventional coder. Despite the solid theoretical foundations, current DVC qualitative and quantitative performance falls short of existing conventional coders and there remain crucial limitations. A key constraint governing DVC performance is the quality of side information (SI), a coarse representation of original video frames which are not available at the decoder. Techniques to generate SI have usually been based on linear motion compensated temporal interpolation (LMCTI), though these do not always produce satisfactory SI quality, especially in sequences exhibiting non-linear motion. This thesis presents an intelligent higher order piecewise trajectory temporal interpolation (HOPTTI) framework for SI generation with original contributions that afford better SI quality in comparison to existing LMCTI-based approaches. The major elements in this framework are: (i) a cubic trajectory interpolation algorithm model that significantly improves the accuracy of motion vector estimations; (ii) an adaptive overlapped block motion compensation (AOBMC) model which reduces both blocking and overlapping artefacts in the SI emanating from the block matching algorithm; (iii) the development of an empirical mode switching algorithm; and (iv) an intelligent switching mechanism to construct SI by automatically selecting the best macroblock from the intermediate SI generated by HOPTTI and AOBMC algorithms. Rigorous analysis and evaluation confirms that significant quantitative and perceptual improvements in SI quality are achieved with the new framework

Error-resilient multi-view video plus depth based 3-D video coding

Three Dimensional (3-D) video, by definition, is a collection of signals that can provide depth perception of a 3-D scene. With the development of 3-D display technologies and interactive multimedia systems, 3-D video has attracted significant interest from both industries and academia with a variety of applications. In order to provide desired services in various 3-D video applications, the multiview video plus depth (MVD) representation, which can facilitate the generation of virtual views, has been determined to be the best format for 3-D video data. Similar to 2-D video, compressed 3-D video is highly sensitive to transmission errors due to errors propagated from the current frame to the future predicted frames. Moreover, since the virtual views required for auto-stereoscopic displays are rendered from the compressed texture videos and depth maps, transmission errors of the distorted texture videos and depth maps can be further propagated to the virtual views. Besides, the distortions in texture and depth show different effects on the rendering views. Therefore, compared to the reliability of the transmission of the 2-D video, error-resilient texture video and depth map coding are facing major new challenges. This research concentrates on improving the error resilience performance of MVD-based 3-D video in packet loss scenarios. Based on the analysis of the propagating behaviour of transmission errors, a Wyner-Ziv (WZ)-based error-resilient algorithm is first designed for coding of the multi-view video data or depth data. In this scheme, an auxiliary redundant stream encoded according to WZ principle is employed to protect a primary stream encoded with standard multi-view video coding codec. Then, considering the fact that different combinations of texture and depth coding mode will exhibit varying robustness to transmission errors, a rate-distortion optimized mode switching scheme is proposed to strike the optimal trade-off between robustness and compression effciency. In this approach, the texture and depth modes are jointly optimized by minimizing the overall distortion of both the coded and synthesized views subject to a given bit rate. Finally, this study extends the research on the reliable transmission of view synthesis prediction (VSP)-based 3-D video. In order to mitigate the prediction position error caused by packet losses in the depth map, a novel disparity vector correction algorithm is developed, where the corrected disparity vector is calculated from the depth error. To facilitate decoder error concealment, the depth error is recursively estimated at the decoder. The contributions of this dissertation are multifold. First, the proposed WZbased error-resilient algorithm can accurately characterize the effect of transmission error on multi-view distortion at the transform domain in consideration of both temporal and inter-view error propagation, and based on the estimated distortion, this algorithm can perform optimal WZ bit allocation at the encoder through explicitly developing a sophisticated rate allocation strategy. This proposed algorithm is able to provide a finer granularity in performing rate adaptivity and unequal error protection for multi-view data, not only at the frame level, but also at the bit-plane level. Secondly, in the proposed mode switching scheme, a new analytic model is formulated to optimally estimate the view synthesis distortion due to packet losses, in which the compound impact of the transmission distortions of both the texture video and the depth map on the quality of the synthesized view is mathematically analysed. The accuracy of this view synthesis distortion model is demonstrated via simulation results and, further, the estimated distortion is integrated into a rate-distortion framework for optimal mode switching to achieve substantial performance gains over state-of-the-art algorithms. Last, but not least, this dissertation provides a preliminary investigation of VSP-based 3-D video over unreliable channel. In the proposed disparity vector correction algorithm, the pixel-level depth map error can be precisely estimated at the decoder without the deterministic knowledge of the error-free reconstructed depth. The approximation of the innovation term involved in depth error estimation is proved theoretically. This algorithm is very useful to conceal the position-erroneous pixels whose disparity vectors are correctly received

Fast Motion Estimation Algorithms for Block-Based Video Coding Encoders

The objective of my research is reducing the complexity of video coding standards in real-time scalable and multi-view applications

Selected topics on distributed video coding

Distributed Video Coding (DVC) is a new paradigm for video compression based on the information theoretical results of Slepian and Wolf (SW), and Wyner and Ziv (WZ). While conventional coding has a rigid complexity allocation as most of the complex tasks are performed at the encoder side, DVC enables a flexible complexity allocation between the encoder and the decoder. The most novel and interesting case is low complexity encoding and complex decoding, which is the opposite of conventional coding. While the latter is suitable for applications where the cost of the decoder is more critical than the encoder's one, DVC opens the door for a new range of applications where low complexity encoding is required and the decoder's complexity is not critical. This is interesting with the deployment of small and battery-powered multimedia mobile devices all around in our daily life. Further, since DVC operates as a reversed-complexity scheme when compared to conventional coding, DVC also enables the interesting scenario of low complexity encoding and decoding between two ends by transcoding between DVC and conventional coding. More specifically, low complexity encoding is possible by DVC at one end. Then, the resulting stream is decoded and conventionally re-encoded to enable low complexity decoding at the other end. Multiview video is attractive for a wide range of applications such as free viewpoint television, which is a system that allows viewing the scene from a viewpoint chosen by the viewer. Moreover, multiview can be beneficial for monitoring purposes in video surveillance. The increased use of multiview video systems is mainly due to the improvements in video technology and the reduced cost of cameras. While a multiview conventional codec will try to exploit the correlation among the different cameras at the encoder side, DVC allows for separate encoding of correlated video sources. Therefore, DVC requires no communication between the cameras in a multiview scenario. This is an advantage since communication is time consuming (i.e. more delay) and requires complex networking. Another appealing feature of DVC is the fact that it is based on a statistical framework. Moreover, DVC behaves as a natural joint source-channel coding solution. This results in an improved error resilience performance when compared to conventional coding. Further, DVC-based scalable codecs do not require a deterministic knowledge of the lower layers. In other words, the enhancement layers are completely independent from the base layer codec. This is called the codec-independent scalability feature, which offers a high flexibility in the way the various layers are distributed in a network. This thesis addresses the following topics: First, the theoretical foundations of DVC as well as the practical DVC scheme used in this research are presented. The potential applications for DVC are also outlined. DVC-based schemes use conventional coding to compress parts of the data, while the rest is compressed in a distributed fashion. Thus, different conventional codecs are studied in this research as they are compared in terms of compression efficiency for a rich set of sequences. This includes fine tuning the compression parameters such that the best performance is achieved for each codec. Further, DVC tools for improved Side Information (SI) and Error Concealment (EC) are introduced for monoview DVC using a partially decoded frame. The improved SI results in a significant gain in reconstruction quality for video with high activity and motion. This is done by re-estimating the erroneous motion vectors using the partially decoded frame to improve the SI quality. The latter is then used to enhance the reconstruction of the finally decoded frame. Further, the introduced spatio-temporal EC improves the quality of decoded video in the case of erroneously received packets, outperforming both spatial and temporal EC. Moreover, it also outperforms error-concealed conventional coding in different modes. Then, multiview DVC is studied in terms of SI generation, which differentiates it from the monoview case. More specifically, different multiview prediction techniques for SI generation are described and compared in terms of prediction quality, complexity and compression efficiency. Further, a technique for iterative multiview SI is introduced, where the final SI is used in an enhanced reconstruction process. The iterative SI outperforms the other SI generation techniques, especially for high motion video content. Finally, fusion techniques of temporal and inter-view side informations are introduced as well, which improves the performance of multiview DVC over monoview coding. DVC is also used to enable scalability for image and video coding. Since DVC is based on a statistical framework, the base and enhancement layers are completely independent, which is an interesting property called codec-independent scalability. Moreover, the introduced DVC scalable schemes show a good robustness to errors as the quality of decoded video steadily decreases with error rate increase. On the other hand, conventional coding exhibits a cliff effect as the performance drops dramatically after a certain error rate value. Further, the issue of privacy protection is addressed for DVC by transform domain scrambling, which is used to alter regions of interest in video such that the scene is still understood and privacy is preserved as well. The proposed scrambling techniques are shown to provide a good level of security without impairing the performance of the DVC scheme when compared to the one without scrambling. This is particularly attractive for video surveillance scenarios, which is one of the most promising applications for DVC. Finally, a practical DVC demonstrator built during this research is described, where the main requirements as well as the observed limitations are presented. Furthermore, it is defined in a setup being as close as possible to a complete real application scenario. This shows that it is actually possible to implement a complete end-to-end practical DVC system relying only on realistic assumptions. Even though DVC is inferior in terms of compression efficiency to the state of the art conventional coding for the moment, strengths of DVC reside in its good error resilience properties and the codec-independent scalability feature. Therefore, DVC offers promising possibilities for video compression with transmission over error-prone environments requirement as it significantly outperforms conventional coding in this case

Error control strategies in H.265|HEVC video transmission

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonWith the rapid development in video coding technologies in the last decade, high-resolution video delivery suffers from packet loss due to unreliable transmission channels (time-varying characteristics). The error Resilience approaches at channel coding level are less efficient to implement in real time video transmission as the encoded video samples are in variable code length. Therefore, error resilience in video coding standard plays a vital role to reduce the effect of error propagation and improve the perceived visual quality. The main work in this thesis is to develop an efficient error resilience mechanism for H.265|HEVC video coding standard to reduce the effects of error propagation in error-prone conditions. In this thesis, two error resilience algorithms are proposed. The first one is Adaptive Slice Encoding (ASE) error resilience algorithm. The concept of this algorithm is to extract and protect the most active slices in the coded bitstream based on the adaptive search window. This algorithm can be applied in low delay video transmission with and without using a feedback channel. It is also designed to be compatible with reference coding software manual (HM16) for H.265|HEVC coding standard. The second proposed algorithm is a joint encoder-decoder error resilience called Error resilience based on Supplemental Enhancement Information (ERSEI) algorithm. A feedback message status is used from the decoder to notify the encoder to start encoding clean random-access picture adaptively based on the decoded picture hash message status from the decoder. At the same time, the decoder will be notified to start the error concealment process whilst waiting to receive correct video data. A recovery point message from the decoder feedback channel is used to update the encoder with error messages. In this thesis, extensive experimental work, evaluation, and comparison with state-of-the-art related algorithms have been conducted to evaluate the proposed algorithms. Furthermore, the best trade-off between the coding efficiency of the proposed error resilience algorithms and error resilience performance has been considered at the design stage. The experimental work evaluation includes both encoding conditions, i.e. error-free and error-prone. The results achieved from the experiments show significant improvements, in (Y-PSNR) results and subjective quality of the decoded bitstream, using the proposed algorithm in error-prone conditions with a variety of packet loss rates. Moreover, experimental work is conducted to test the algorithms complexity in terms of required processing execution time at both encoding and decoding stages. Additionally, the video coding standard performance for both H.264|AVC and H.265|HEVC coding standards are evaluated in error-free and error-prone environments. For ASE algorithm and when compared with improved region of interest (IROI) and region of interest (ROI) algorithms, a significant improvement in visual quality was the most obvious finding from the obtained results with PLRs of 2-18 (%). For ERSEI algorithm and when compared with the default HM16 with pixel copy concealment and motion compensated error concealment (MCEC) techniques, the evaluation results indicate clear visual quality enhancement under different packet loss rates PLRs (1,2 6, 8) %.The Ministry of Higher Education and Scientific Research in Ira

Fast motion estimation algorithms for block-based video coding encoders

The objective of my research is reducing the complexity of video coding standards in real-time scalable and multi-view applications.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Research and developments of distributed video coding

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.The recent developed Distributed Video Coding (DVC) is typically suitable for the applications such as wireless/wired video sensor network, mobile camera etc. where the traditional video coding standard is not feasible due to the constrained computation at the encoder. With DVC, the computational burden is moved from encoder to decoder. The compression efficiency is achieved via joint decoding at the decoder. The practical application of DVC is referred to Wyner-Ziv video coding (WZ) where the side information is available at the decoder to perform joint decoding. This join decoding inevitably causes a very complex decoder. In current WZ video coding issues, many of them emphasise how to improve the system coding performance but neglect the huge complexity caused at the decoder. The complexity of the decoder has direct influence to the system output. The beginning period of this research targets to optimise the decoder in pixel domain WZ video coding (PDWZ), while still achieves similar compression performance. More specifically, four issues are raised to optimise the input block size, the side information generation, the side information refinement process and the feedback channel respectively. The transform domain WZ video coding (TDWZ) has distinct superior performance to the normal PDWZ due to the exploitation in spatial direction during the encoding. However, since there is no motion estimation at the encoder in WZ video coding, the temporal correlation is not exploited at all at the encoder in all current WZ video coding issues. In the middle period of this research, the 3D DCT is adopted in the TDWZ to remove redundancy in both spatial and temporal direction thus to provide even higher coding performance. In the next step of this research, the performance of transform domain Distributed Multiview Video Coding (DMVC) is also investigated. Particularly, three types transform domain DMVC frameworks which are transform domain DMVC using TDWZ based 2D DCT, transform domain DMVC using TDWZ based on 3D DCT and transform domain residual DMVC using TDWZ based on 3D DCT are investigated respectively. One of the important applications of WZ coding principle is error-resilience. There have been several attempts to apply WZ error-resilient coding for current video coding standard e.g. H.264/AVC or MEPG 2. The final stage of this research is the design of WZ error-resilient scheme for wavelet based video codec. To balance the trade-off between error resilience ability and bandwidth consumption, the proposed scheme emphasises the protection of the Region of Interest (ROI) area. The efficiency of bandwidth utilisation is achieved by mutual efforts of WZ coding and sacrificing the quality of unimportant area. In summary, this research work contributed to achieves several advances in WZ video coding. First of all, it is targeting to build an efficient PDWZ with optimised decoder. Secondly, it aims to build an advanced TDWZ based on 3D DCT, which then is applied into multiview video coding to realise advanced transform domain DMVC. Finally, it aims to design an efficient error-resilient scheme for wavelet video codec, with which the trade-off between bandwidth consumption and error-resilience can be better balanced