Adaptive Transmission Power with Vehicle Density for Congestion Control

The Intelligent Transport Systems (ITS) employs the Vehicular Ad-hoc Networks (VANET) technology to prevent and reduce accidents on highways. VANET uses wireless communication technology that includes protocols and applications that provides safety and non-safety features for a safe and comfortable driving experience. A major problem with VANET is that the network channel utilized for the transmission of network packets for awareness becomes congested due to vehicles competing to use the channel leading to packet loss, high transmission delay and unfair resource usage. These problems would eventually lead to the periodic exchange of Basic Safety Messages not being delivered on time, thereby making VANET unreliable. Researchers have focused on numerous approaches for controlling congestion on the network channel such as adapting the rate of transmission of packets i.e. the number of packets that can be sent per second or adjusting the transmission power which is the distance a packet can travel. An approach is proposed in this thesis to adapt the transmission power, based on the vehicle density state of the network, with the aim of reducing congestion on the network channel and improving the performance of VANET. Results indicate that this can lead to improved performance in terms of reduced packet loss and inter-packet delay

Survey on Congestion Detection and Control in Connected Vehicles

The dynamic nature of vehicular ad hoc network (VANET) induced by frequent topology changes and node mobility, imposes critical challenges for vehicular communications. Aggravated by the high volume of information dissemination among vehicles over limited bandwidth, the topological dynamics of VANET causes congestion in the communication channel, which is the primary cause of problems such as message drop, delay, and degraded quality of service. To mitigate these problems, congestion detection, and control techniques are needed to be incorporated in a vehicular network. Congestion control approaches can be either open-loop or closed loop based on pre-congestion or post congestion strategies. We present a general architecture of vehicular communication in urban and highway environment as well as a state-of-the-art survey of recent congestion detection and control techniques. We also identify the drawbacks of existing approaches and classify them according to different hierarchical schemes. Through an extensive literature review, we recommend solution approaches and future directions for handling congestion in vehicular communications

A comprehensive survey on congestion control techniques and the research challenges on VANET

The nature of vehicular mobility and high speed of vehicular ad hoc network (VANET) with dynamic change in the network topology let the vehicular remain as one of the most challenging problems in vehicular-to-vehicular (V2V) communications. Information dissemination is the major problem in VANET with a fixed bandwidth which is causing congestion on the resources, such as channels and affects the performance of the important application, especially when the emergency or secure transmission of messages is exchanged between the vehicles-to-vehicles communication. To mitigate these problems and introduce a safe vehicular environment in urban and highway, congestion detection and control has been considered and with various strategies and techniques which is take the attention of researchers in VANET. In our survey we mentioned recent techniques and approaches which is used in congestion detection and control and applied different matrices and parameters which is used to evaluate these approaches. In addition, the study also explained the limitation and problems that face the current congestion detection and control schemes, finally we present various solution approach and future expectations in vehicular communication

Adaptive QoS control of DSRC vehicle networks for collaborative vehicle safety applications.

Road traffic safety has been a subject of worldwide concern. Dedicated short range communications (DSRC) is widely regarded as a promising enabling technology for collaborative safety applications (CSA), which can provide robust communication and affordable performance to build large scale CSA system. The main focus of this thesis is to develop solutions for DSRC QoS control in order to provide robust QoS support for CSA. The first design objective is to ensure robust and reliable message delivery services for safety applications from the DSRC networks. As the spectrum resources allocated to DSRC network are expected to be shared by both safety and non-safety applications, the second design objective is to make QoS control schemes bandwidth-efficient in order to leave as much as possible bandwidth for non-safety applications. The first part of the thesis investigates QoS control in infrastructure based DSRC networks, where roadside access points (AP) are available to control QoS control at road intersections. After analyse DSRC network capabilities on QoS provisioning without congestion control, we propose a two-phases adaptive QoS control method for DSRC vehicle networks. In the first phase an offline simulation based approach is used to and out the best possible system configurations (e.g. message rate and transmit power) with given numbers of vehicles and QoS requirements. It is noted that with different utility functions the values of optimal parameters proposed by the two phases centralized QoS control scheme will be different. The conclusions obtained with the proposed scheme are dependent on the chosen utility functions. But the proposed two phases centralized QoS control scheme is general and is applicable to different utility functions. In the second phase, these configurations are used online by roadside AP adaptively according to dynamic traffic loads. The second part of the thesis is focused on distributed QoS control for DSRC networks. A framework of collaborative QoS control is proposed, following which we utilize the local channel busy time as the indicator of network congestion and adaptively adjust safety message rate by a modified additive increase and multiplicative decrease (AIMD) method in a distributed way. Numerical results demonstrate the effectiveness of the proposed QoS control schemes

Congestion Control in Vehicular Ad Hoc Networks

RÉSUMÉ Les réseaux Véhiculaires ad hoc (VANets) sont conçus pour permettre des communications sans fil fiables entre les nœuds mobiles à haute vitesse. Afin d'améliorer la performance des applications dans ce type de réseaux et garantir un environnement sûr et confortable pour ses utilisateurs, la Qualité de Service (QoS) doit être supportée dans ces réseaux. Le délai ainsi que les pertes de paquets sont deux principaux indicateurs de QoS qui augmentent de manière significative en raison de la congestion dans les réseaux. En effet, la congestion du réseau entraîne une saturation des canaux ainsi qu’une augmentation des collisions de paquets dans les canaux. Par conséquent, elle doit être contrôlée pour réduire les pertes de paquets ainsi que le délai, et améliorer les performances des réseaux véhiculaires. Le contrôle de congestion dans les réseaux VANets est une tâche difficile en raison des caractéristiques spécifiques des VANets, telles que la grande mobilité des nœuds à haute vitesse, le taux élevé de changement de topologie, etc. Le contrôle de congestion dans les réseaux VANets peut être effectué en ayant recours à une stratégie qui utilise l'un des paramètres suivants : le taux de transmission, la puissance de transmission, la priorisation et l’ordonnancement, ainsi que les stratégies hybrides. Les stratégies de contrôle de congestion dans les réseaux VANets doivent faire face à quelques défis tels que l'utilisation inéquitable des ressources, la surcharge de communication, le délai de transmission élevé, et l'utilisation inefficace de la bande passante, etc. Par conséquent, il est nécessaire de développer de nouvelles approches pour faire face à ces défis et améliorer la performance des réseaux VANets. Dans cette thèse, dans un premier temps, une stratégie de contrôle de congestion en boucle fermée est développée. Cette stratégie est une méthode de contrôle de congestion dynamique et distribuée qui détecte la congestion en mesurant le niveau d'utilisation du canal. Ensuite, la congestion est contrôlée en ajustant la portée et le taux de transmission qui ont un impact considérable sur la saturation du canal. Ajuster la portée et le taux de transmission au sein des VANets est un problème NP-difficile en raison de la grande complexité de la détermination des valeurs appropriées pour ces paramètres. Considérant les avantages de la méthode de recherche Tabou et son adaptabilité au problème, une méthode de recherche multi-objective est utilisée pour trouver une portée et un taux de transmission dans un délai raisonnable. Le délai et la gigue, fonctions multi-objectifs de l'algorithme Tabou, sont minimisés dans l'algorithme proposé. Par la suite, deux stratégies de contrôle de congestion en boucle ouverte sont proposées afin de réduire la congestion dans les canaux en utilisant la priorisation et l'ordonnancement des messages. Ces stratégies définissent la priorité pour chaque message en considérant son type de contenu (par exemple les messages d'urgence, de beacon, et de service), la taille des messages, et l’état du réseau (par exemple, les métriques de la vélocité, la direction, l'utilité, la distance, et la validité). L'ordonnancement des messages est effectué sur la base des priorités définies. De plus, comme seconde technique d'ordonnancement, une méthode de recherche Tabou est employée pour planifier les files d'attente de contrôle et de service des canaux de transmission dans un délai raisonnable. A cet effet, le délai et la gigue lors de l'acheminement des messages sont minimisés. Enfin, une stratégie localisée et centralisée qui utilise les ensembles RSU fixés aux intersections pour détecter et contrôler de la congestion est proposée. Cette stratégie regroupe tous les messages transférés entre les véhicules qui se sont arrêtés à une lumière de signalisation en utilisant les algorithmes de Machine Learning. Dans cette stratégie, un algorithme de k-means est utilisé pour regrouper les messages en fonction de leurs caractéristiques (par exemple la taille des messages, la validité des messages, et le type de messages, etc.). Les paramètres de communication, y compris le portée et le taux de transmission, la taille de la fenêtre de contention, et le paramètre AIFS (Arbitration Inter-Frame Spacing) sont déterminés pour chaque grappe de messages en vue de minimiser le délai de livraison. Ensuite, les paramètres de communication déterminés sont envoyés aux véhicules par les RSUs, et les véhicules opèrent en fonction de ces paramètres pour le transfert des messages. Les performances des trois stratégies proposées ont été évaluées en simulant des scénarios dans les autoroutes et la circulation urbaine avec les simulateurs NS2 et SUMO. Des comparaisons ont aussi été faites entre les résultats obtenus à partir des stratégies proposées et les stratégies de contrôle de congestion communément utilisées. Les résultats révèlent qu’avec les stratégies de contrôle de congestion proposées, le débit du réseau augmente et le taux de perte de paquets ainsi que de délai diminuent de manière significative en comparaison aux autres stratégies. Par conséquent, l'application des méthodes proposées aide à améliorer la performance, la sureté et la fiabilité des VANets.----------ABSTRACT Vehicular Ad hoc Networks (VANets) are designed to provide reliable wireless communications between high-speed mobile nodes. In order to improve the performance of VANets’ applications, and make a safe and comfort environment for VANets’ users, Quality of Service (QoS) should be supported in these networks. The delay and packet losses are two main indicators of QoS that dramatically increase due to the congestion occurrence in the networks. Indeed, due to congestion occurrence, the channels are saturated and the packet collisions increase in the channels. Therefore, the congestion should be controlled to decrease the packet losses and delay, and to increase the performance of VANets. Congestion control in VANets is a challenging task due to the specific characteristics of VANets such as high mobility of the nodes with high speed, and high rate of topology changes, and so on. Congestion control in VANets can be carried out using the strategies that can be classified into rate-based, power-based, CSMA/CA-based, prioritizing and scheduling-based, and hybrid strategies. The congestion control strategies in VANets face to some challenges such as unfair resources usage, communication overhead, high transmission delay, and inefficient bandwidth utilization, and so on. Therefore, it is required to develop new strategies to cope with these challenges and improve the performance of VANets. In this dissertation, first, a closed-loop congestion control strategy is developed. This strategy is a dynamic and distributed congestion control strategy that detects the congestion by measuring the channel usage level. Then, the congestion is controlled by tuning the transmission range and rate that considerably impact on the channel saturation. Tuning the transmission range and rate in VANets is an NP-hard problem due to the high complexity of determining the proper values for these parameters in vehicular networks. Considering the benefits of Tabu search algorithm and its adaptability with the problem, a multi-objective Tabu search algorithm is used for tuning transmission range and rate in reasonable time. In the proposed algorithm, the delay and jitter are minimized as the objective functions of multi-objective Tabu Search algorithm. Second, two open-loop congestion control strategies are proposed that prevent the congestion occurrence in the channels using the prioritizing and scheduling the messages. These strategies define the priority for each message by considering the content of messages (i.e. types of the messages for example emergency, beacon, and service messages), size of messages, and state of the networks (e.g. velocity, direction, usefulness, distance and validity metrics). The scheduling of the messages is conducted based on the defined priorities. In addition, as the second scheduling technique, a Tabu Search algorithm is employed to schedule the control and service channel queues in a reasonable time. For this purpose, the delay and jitter of messages delivery are minimized. Finally, a localized and centralized strategy is proposed that uses RSUs set at intersections for detecting and controlling the congestion. These strategy clusters all the messages that transferred between the vehicles stopped before the red traffic light using Machine Learning algorithms. In this strategy, a K-means learning algorithm is used for clustering the messages based on their features (e.g. size of messages, validity of messages, and type of messages, and so on). The communication parameters including the transmission range and rate, contention window size, and Arbitration Inter-Frame Spacing (AIFS) are determined for each messages cluter based on the minimized delivery delay. Then, the determined communication parameters are sent to the vehicles by RSUs, and the vehicles operate based on these parameters for transferring the messages. The performances of three proposed strategies were evaluated by simulating the highway and urban scenarios in NS2 and SUMO simulators. Comparisons were also made between the results obtained from the proposed strategies and the common used congestion control strategies. The results reveal that using the proposed congestion control strategies, the throughput, packet loss ratio and delay are significantly improved as compared to the other strategies. Therefore, applications of the proposed strategies help improve the performance, safety, and reliability of VANets