Fiber link design considerations for cloud-Radio Access Networks

Analog radio over fiber (RoF) links may offer advantages for cloud-Radio Access Networks in terms of component cost, but the behavior of the distortion with large numbers of subcarriers needs to be understood. In this paper, this is presented in terms of the variation between subcarriers. Memory polynomial predistortion is also shown to compensate for RoF and wireless path distortion. Whether for digitized or analog links, it is shown that appropriate framing structure parameters must be used to assure performance, especially of time-division duplex systems

Experimental demonstration of digital predistortion for orthogonal frequency-division multiplexing-radio over fibre links near laser resonance

Radio over fibre (RoF), an enabling technology for distribution of wireless broadband service signals through analogue optical links, suffers from non-linear distortion. Digital predistortion has been demonstrated as an effective approach to overcome the RoF non-linearity. However, questions remain as to how the approach performs close to laser resonance, a region of significant dynamic non-linearity, and how resilient the approach is to changes in input signal and link operating conditions. In this work, the performance of a digital predistortion approach is studied for directly modulated orthogonal frequency-division multiplexing RoF links operating from 2.47 to 3.7 GHz. It extends previous works to higher frequencies, and to higher quadrature amplitude modulation (QAM) levels. In addition, the resilience of the predistortion approach to changes in modulation level of QAM schemes, and average power levels are investigated, and a novel predistortion training approach is proposed and demonstrated. Both memoryless and memory polynomial predistorter models, and a simple off-line least-squares-based identification method, are used, with excellent performance improvements demonstrated up to 3.0 GHz

包絡線パルス幅変調によるOFDM信号の光ファイバ無線伝送に関する研究

In this thesis, an Envelop Pulse-Width Modulation-RoF (EPWM-RoF) transmission scheme is proposed to solve the RoF nonlinearity and echo effect issues. Through the theoretical analysis, simulation and experimental results, it can be concluded that EPWM-RoF transmission is effective in dealing with E/O nonlinearity and echo effect in RoF channel.電気通信大学201

Linearization techniques to suppress optical nonlinearity

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis is shown the implementation of the linearization techniques such as feedforward and pre-distortion feedback linearization to suppress the optical components nonlinearities caused by the fibre and semiconductor optical amplifier (SOA). The simulation verified these two linearization techniques for single tone direct modulation, two tone indirect modulation and ultra wideband input to the optical fibre. These techniques uses the amplified spontaneously emission (ASE) noise reduction in two loops of SOA by a feed-forward and predistortion linearizer and is shown more than 6dB improvement. Also it investigates linearization for the SOA amplifier to cancel out the third order harmonics or inter-modulation distortion (IMD) or four waves mixing. In this project, more than 20 dB reductions is seen in the spectral re-growth caused by the SOA. Amplifier non-linearity becomes more severe with two strong input channels leading to inter-channel distortion which can completely mask a third adjacent channel. The simulations detailed above were performed utilizing optimum settings for the variable gain, phase and delay components in the error correction loop of the feed forward and Predistortion systems and hence represent the ideal situation of a perfect feed-forward and Predistortion system. Therefore it should be consider that complexity of circuit will increase due to amplitude, phase and delay mismatches in practical design. Also it has describe the compatibility of Software Defined Radio with Hybrid Fibre Radio with simulation model of wired optical networks to be used for future research investigation, based on the star and ring topologies for different modulation schemes, and providing the performance for these configurations

Radio over fiber enabling PON fronthaul in a two-tiered cloud

Avec l’avènement des objets connectés, la bande passante nécessaire dépasse la capacité des interconnections électriques et interface sans fils dans les réseaux d’accès mais aussi dans les réseaux coeurs. Des systèmes photoniques haute capacité situés dans les réseaux d’accès utilisant la technologie radio sur fibre systèmes ont été proposés comme solution dans les réseaux sans fil de 5e générations. Afin de maximiser l’utilisation des ressources des serveurs et des ressources réseau, le cloud computing et des services de stockage sont en cours de déploiement. De cette manière, les ressources centralisées pourraient être diffusées de façon dynamique comme l’utilisateur final le souhaite. Chaque échange nécessitant une synchronisation entre le serveur et son infrastructure, une couche physique optique permet au cloud de supporter la virtualisation des réseaux et de les définir de façon logicielle. Les amplificateurs à semi-conducteurs réflectifs (RSOA) sont une technologie clé au niveau des ONU(unité de communications optiques) dans les réseaux d’accès passif (PON) à fibres. Nous examinons ici la possibilité d’utiliser un RSOA et la technologie radio sur fibre pour transporter des signaux sans fil ainsi qu’un signal numérique sur un PON. La radio sur fibres peut être facilement réalisée grâce à l’insensibilité a la longueur d’onde du RSOA. Le choix de la longueur d’onde pour la couche physique est cependant choisi dans les couches 2/3 du modèle OSI. Les interactions entre la couche physique et la commutation de réseaux peuvent être faites par l’ajout d’un contrôleur SDN pour inclure des gestionnaires de couches optiques. La virtualisation réseau pourrait ainsi bénéficier d’une couche optique flexible grâce des ressources réseau dynamique et adaptée. Dans ce mémoire, nous étudions un système disposant d’une couche physique optique basé sur un RSOA. Celle-ci nous permet de façon simultanée un envoi de signaux sans fil et le transport de signaux numérique au format modulation tout ou rien (OOK) dans un système WDM(multiplexage en longueur d’onde)-PON. Le RSOA a été caractérisé pour montrer sa capacité à gérer une plage dynamique élevée du signal sans fil analogique. Ensuite, les signaux RF et IF du système de fibres sont comparés avec ses avantages et ses inconvénients. Finalement, nous réalisons de façon expérimentale une liaison point à point WDM utilisant la transmission en duplex intégral d’un signal wifi analogique ainsi qu’un signal descendant au format OOK. En introduisant deux mélangeurs RF dans la liaison montante, nous avons résolu le problème d’incompatibilité avec le système sans fil basé sur le TDD (multiplexage en temps duplexé).With the advent of IoT (internet of things) bandwidth requirements triggered by aggregated wireless connections have exceeded the fundamental limitation of copper and microwave based wireless backhaul and fronthaul networks. High capacity photonic fronthaul systems employing radio over fiber technology has been proposed as the ultimate solution for 5G wireless system. To maximize utilization of server and network resources, cloud computing and storage based services are being deployed. In this manner, centralized resources could be dynamically streamed to the end user as requested. Since on demand resource provision requires the orchestration between the server and network infrastructure, a smart photonic (physical layer)PHY enabled cloud is foreseen to support network virtualization and software defined network. RSOAs (Reflective Semiconductor Optical Amplifier) are being investigated as key enablers of the colorless ONU(Optical Network Unit) solution in PON (Passive Optical Network). We examine the use of an RSOA in radio over fiber systems to transport wireless signals over a PON simultaneously with digital data. Radio over fiber systems with flexible wavelength allocation could be achieved thanks to the colorless operation of the RSOA and wavelength reuse technique. The wavelength flexibility in optical PHY are inline with the paradigm of software defined network (SDN) in OSI layer 2/3. The orchestration between optical PHY and network switching fabric could be realized by extending the SDN controller to include optical layer handlers. Network virtualization could also benefit from the flexible optical PHY through dynamic and tailored optical network resource provision. In this thesis, we investigate an optical PHY system based on RSOA enabling both analog wireless signal and digital On-Off Keying (OOK) transportation within WDM (Wavelength Division Multiplexing) PON architecture. The RSOA has been characterized to show its potential ability to handle high dynamic range analog wireless signal. Then the RF and IF radio over fiber scheme is compared with its pros and cons. Finally we perform the experiment to shown a point to point WDM link with full duplex transmission of analog WiFi signal with downlink OOK signal. By introducing two RF mixer in the uplink, we have solved the incompatible problem with TDD (Time Division Duplex) based wireless system

Digital Predistortion for Broadband Radio-over-Fiber Transmission Systems

Abstract Digital Predistortion for Broadband Radio-over-Fiber Transmission Systems Zichen Xuan Concordia University 2015 With the increase of the demand of high capacity wireless access, design of cost effective broadband wireless signal distribution system is required, particularly for future massive multi-input and multi-output (MIMO) wireless. Recently, Radio-over-Fiber (RoF) transmission systems have been revisited for broadband wireless signal distribution between central processing unit (CPU) and remote radio unit (RRU) (i.e., antenna towers). RoF, which is based on optical subcarrier modulation and thus an analog transmission system, fully utilize the advantages of broadband and low-loss fiber transmission, and also radio signal transmission. Unfortunately, RoF transmission systems are very susceptible to nonlinear distortions, which can be generated by all inline functional components of the RoF systems. However, two typical functions, i.e., optical subcarrier modulation and RF power amplification, are the two key sources of the nonlinear distortions. Various linearization techniques have been investigated for power RF amplifiers. It has been found that digital predistortion (DPD) linearization is one of the best approaches for RF bandwidth of up to 20 MHz. In this thesis, DPD linearization is explored for broadband RoF transmission systems. Instead of DPD implemented in baseband previously, a DPD linearization technique implemented in RF domain is investigated and demonstrated experimentally for broadband RoF transmission systems. Memory polynomial (MP) model is used for theoretical modeling of nonlinear RoF transmission systems, in which both nonlinear distortion and memory effect can be included. In order to implement the predistorter of the DPD using the MP model, least square (LS) method is used to extract the coefficients of the predistorter. Using the obtained coefficients, the trained predistorter is implemented and then verified in two experiments of directly modulated RoF transmission systems. In the first experiment, the DPD is verified in WiFi over fiber transmission systems, and more than 8 dB and 5.6 dB improvements of error vector magnitude (EVM) are achieved in back to back (BTB) and after 10 km single mode fiber (SMF) transmission. In the second experiment, both WiFi and ultra wide band (UWB) wireless signals are transmitted in the RoF system, which occupies over 2.4 GHz transmission bandwidth. It is shown that the implemented DPD leads to EVM improvements of 4.5 dB (BTB) and 3.1 dB (10 km SMF) for the WiFi signal, and 4.6 dB (BTB) and 4 dB (10 km SMF) for the UWB signal

Automatic Tuning of Silicon Photonics Millimeter-Wave Transceivers Building Blocks

Today, continuously growing wireless traffic have guided the progress in the wireless communication systems. Now, evolution towards next generation (5G) wireless communication systems are actively researched to accommodate expanding future data traffic. As one of the most promising candidates, integrating photonic devices in to the existing wireless system is considered to improve the performance of the systems. Emerging silicon photonic integrated circuits lead this integration more practically, and open new possibilities to the future communication systems. In this dissertation, the development of the electrical wireless communication systems are briefly explained. Also, development of the microwave photonics and silicon photonics are described to understand the possibility of the hybrid SiP integrated wireless communication systems. A limitation of the current electrical wireless systems are addressed, and hybrid integrated mm-wave silicon photonic receiver, and silicon photonic beamforming transmitter are proposed and analyzed in system level. In the proposed mm-wave silicon photonic receiver has 4th order pole-zero silicon photonic filter in the system. Photonic devices are vulnerable to the process and temperature variations. It requires manual calibration, which is expensive, time consuming, and prone to human errors. Therefore, precise automatic calibration solution with modified silicon photonic filter structure is proposed and demonstrated. This dissertation demonstrates fully automatic tuning of silicon photonic all-pass filter (APF)-based pole/zero filters using a monitor-based tuning method that calibrates the initial response by controlling each pole and zero individually via micro-heaters. The proposed tuning approach calibrates severely degraded initial responses to the designed elliptic filter shapes and allows for automatic bandwidth and center frequency reconfiguration of these filters. This algorithm is demonstrated on 2nd- and 4th-order filters fabricated in a standard silicon photonics foundry process. After the initial calibration, only 300ms is required to reconfigure a filter to a different center frequency. Thermal crosstalk between the micro-heaters is investigated, with substrate thinning demonstrated to suppress this effect and reduce filter calibration to less than half of the original thick substrate times. This fully automatic tuning approach opens the possibility of employing silicon photonic filters in real communication systems. Also, in the proposed beamforming transmitter, true-time delay ring resonator based 1x4 beamforming network is imbedded. A proposed monitor-based tuning method compensates fabrication variations and thermal crosstalk by controlling micro-heaters individually using electrical monitors. The proposed tuning approach successfully demonstrated calibration of OBFN from severely degraded initial responses to well-defined group delay response required for the targeted radiating angle with a range of 60◦ (-30◦ to 30◦ ) in a linear beamforming antenna array. This algorithm is demonstrated on OBFN fabricated in a standard silicon photonics foundry process. The calibrated OBFN operates at 30GHz and provide 2GHz bandwidth. This fully automatic tuning approach opens the possibility of employing silicon OBFN in real wideband mm-wave wireless communication systems by providing robust operating solutions. All the proposed photonic circuits are implemented using the standard silicon photonic technologies, and resulted in several publications in IEEE/OSA Journals and Conferences

Performance improvement and cost reduction techniques for radio over fiber communications

Advanced cost reduction and performance improvement techniques conceived for Radio Over Fiber (ROF) communications are considered. ROF techniques are expected to form the backbone of the future 5G generation of wireless networks. The achievable link performance and the associated deployement cost constitute the most salient metrics of a ROF architecture. In this paper, we commence by providing a rudimentary overview of the ROF architecture and then elaborate on ROF techniques designed for improving the attainable system performance. We conclude by describing the ROF techniques conceived for reducing the ROF system installation costs

Techniques for nonlinear distortion suppression in radio over fiber communication systems

Radio over fiber (RoF) is a promising technology that will indisputably compete as a viable solution for future wireless, cellular and broadband networks. RoF, when combined with dense wavelength division multiplexing (DWDM), such as SONET/SDH, it can become a complete flexible and cost effective solution to the global telecommunication network, where asynchronous and synchronous communications may be efficiently supported. Subcarrier modulation (SCM) is utilized to modulate a RF signal on light, which in turn will be transmitted by fiber. Unfortunately, the transmission in most cases may become corrupted by nonlinear distortion that is induced by the nonlinear response of the optical transmitter, optical receiver and chromatic dispersion of the single mode fiber (SMF). The nonlinear distortion degrades the receiver sensitivity, which leads to a poor bit error rate (BER) and spurious free dynamic range (SFDR). Ultimately, this will increase RoF system costs and render it impractical. The objective of this thesis is to develop linearization methods that reduce the nonlinear distortion, increase receiver sensitivity and increase SFDR. The designs should also address the entire RoF system by combating the optical power fading issue that will be discussed in Chapter 2 without significantly adding great expense and complexity to the RoF system. Four optical linearization methods are proposed and shown through extensive simulation and/or experimentation to outperform similar existing linearization systems described in literature. The proposed single wavelength balanced system is shown to improve the suppression of 2nd order distortion over the dual wavelength balanced system, thereby leading to greater improvement in receiver sensitivity and BER. Furthermore, the design also suppresses relative intensity noise (RIN). The proposed tunable fiber Bragg grating (FBG) balanced system is capable of suppressing both 2 nd and 3 rd order distortions despite which RF carrier that is used. Furthermore, it was shown to outperform the conventional RoF system in terms of receiver sensitivity and BER. The proposed asymmetric Mach-Zehnder modulator (MZM) has been shown to generate optical single sideband (OSSB) transmissions and outperform the dual-parallel modulator, by improving 3rd order intermodulation distortion (3IMD) suppression and increasing SFDR. The final proposed linearization method is the mixed-polarization MZM, where OSSB is also generated and outperforms the conventional OSSB RoF system in terms of 3IMD suppression and SFDR. Furthermore, close form expressions for SFDR are developed for the final two designs, which is crucial in study of their stability and performance

Nonlinear impairments and mitigation technologies for the next generation fiber-wireless mobile fronthaul networks

The proliferation of Internet-connected mobile devices and video-intensive services are driving the growth of mobile data traffic in an explosive way. The last mile of access networks, mobile fronthaul (MFH) networks, have become the data rate bottleneck of user experience. The objective of this research are two-fold. For analog MFH, nonlinear interferences among multiple bands of mobile signals in a multi-RAT multi-service radio-over-fiber (RoF)-based MFH system are investigated for the first time. The nonlinear impairments of both single-carrier and multi-carrier signals are investigated, and it is experimentally demonstrated that inter-channel interferences play a more important role in the performance degradation of analog MFH than the nonlinear distortions of each individual signal. A digital predistortion technique was also presented to linearize the analog MFH links. On the other hand, for digital MFH, we experimentally demonstrate a novel digitization interface based on delta-sigma modulation to replace the state-of-the-art common public radio interface (CPRI). Compared with CPRI, it provides improved spectral efficiency and enhanced fronthaul capacity, and can accommodate both 4G-LTE and 5G mobile services.Ph.D