Effective throughput: A unified benchmark for pilot-aided OFDM/SDMA wireless communication systems

In this paper, we study the uplink performance of an orthogonal frequency division multiplexing (OFDM) wireless system where multiple antennas are utilized at the base station (BS). Further, capacity can be greatly enhanced through spatial division multiple access (SDMA), so that several users can transmit packets simultaneously to the BS. The system performance is determined by various transmission techniques, including methods for channel estimation, modulation, as well as channel coding. Conventional parameters such as packet error rate (PER) and bit error rate (BER) are unable to reflect the actual system performance because no consideration is given to the overheads incurred by the transmission techniques. Therefore, we are motivated to propose a novel concept called effective throughput to characterize the capacity available to users by incorporating all these factors. The effective throughput for a user can be viewed as the average number of successfully received data bits in an OFDM symbol after excluding erroneously received packets and the overheads due to channel estimation and coding. It also directly relates to the transmission delay of a user packet. The system effective throughput is the aggregated effective throughput of all users. Simulation results demonstrate that effective throughput can serve as a useful and more meaningful benchmark parameter in optimizing system performance.published_or_final_versio

Study the Effect of Co-Channel Interference in STC MIMO-OFDM System and Mitigation of CCI using Beamforming Technique

In this modern age of high speed wireless data communication, Multiple input multiple output orthogonal frequency division multiplexing (MIMO-OFDM) schemes have recently drawn wide interests due to their capability of high data rate transmission over multipath fading channels. This thesis work introduces the study of multi- user and multi-antenna MIMO-OFDM systems. In this work, the performances of two main classes of MIMO-OFM system i.e. multi-user and multi-antenna MIMO-ODM techniques have been studied. The transmitted data is sent using BPSK, QPSK modulation techniques. The performance of the system in Rayleigh and AWGN channel is studied. Space time coding technique also used in transmitting side of the multi-antenna MIMO system.Study and analysis of the effect of co-channel interference over wireless communication system is considered the main objective of this project work .Beamforming technique is one of the best techniques to mitigate co-channel interference. There are several beamforming techniques like LMS, RLS style beamforming techniques. LMS style adaptive beamforming technique is applied to the system. The performance of the LMS style beamforming technique for mitigation of co-channel interference has been analyzed for different modulation techniques.The performance comparison between the adaptive beamforming and null steering beamforming techniques is carried out for the space time coded MIMO-OFDM system. From the performance analysis, it is observed that to mitigate the co-channel interference in ST coded MIMO-OFDM system, adaptive beamforming technique outperforms the method based on the null steering beamforming

On multiple-antenna communications: signal detection, error exponent and and quality of service

Motivated by the demand of increasing data rate in wireless communication, multiple-antenna communication is becoming a key technology in the next generation wireless system. This dissertation considers three different aspects of multipleantenna communication. The first part is signal detection in the multiple-input multiple-output (MIMO) communication. Some low complexity near optimal detectors are designed based on an improved version of Bell Laboratories Layered Space-Time (BLAST) architecture detection and an iterative space alternating generalized expectation-maximization (SAGE) algorithm. The proposed algorithms can almost achieve the performance of optimal maximum likelihood detection. Signal detections without channel knowledge (noncoherent) and with co-channel interference are also investigated. Novel solutions are proposed with near optimal performance. Secondly, the error exponent of the distributed multiple-antenna communication (relay) in the windband regime is computed. Optimal power allocation between the source and relay node, and geometrical relay node placement are investigated based on the error exponent analysis. Lastly, the quality of service (QoS) of MIMO/single-input single- output(SISO) communication is studied. The tradeoff of the end-to-end distortion and transmission buffer delay is derived. Also, the SNR exponent of the distortion is computed for MIMO communication, which can provide some insights of the interplay among time diversity, space diversity and the spatial multiplex gain

Adaptive antenna array beamforming using a concatenation of recursive least square and least mean square algorithms

In recent years, adaptive or smart antennas have become a key component for various wireless applications, such as radar, sonar and cellular mobile communications including worldwide interoperability for microwave access (WiMAX). They lead to an increase in the detection range of radar and sonar systems, and the capacity of mobile radio communication systems. These antennas are used as spatial filters for receiving the desired signals coming from a specific direction or directions, while minimizing the reception of unwanted signals emanating from other directions.Because of its simplicity and robustness, the LMS algorithm has become one of the most popular adaptive signal processing techniques adopted in many applications, including antenna array beamforming. Over the last three decades, several improvements have been proposed to speed up the convergence of the LMS algorithm. These include the normalized-LMS (NLMS), variable-length LMS algorithm, transform domain algorithms, and more recently the constrained-stability LMS (CSLMS) algorithm and modified robust variable step size LMS (MRVSS) algorithm. Yet another approach for attempting to speed up the convergence of the LMS algorithm without having to sacrifice too much of its error floor performance, is through the use of a variable step size LMS (VSSLMS) algorithm. All the published VSSLMS algorithms make use of an initial large adaptation step size to speed up the convergence. Upon approaching the steady state, smaller step sizes are then introduced to decrease the level of adjustment, hence maintaining a lower error floor. This convergence improvement of the LMS algorithm increases its complexity from 2N in the case of LMS algorithm to 9N in the case of the MRVSS algorithm, where N is the number of array elements.An alternative to the LMS algorithm is the RLS algorithm. Although higher complexity is required for the RLS algorithm compared to the LMS algorithm, it can achieve faster convergence, thus, better performance compared to the LMS algorithm. There are also improvements that have been made to the RLS algorithm families to enhance tracking ability as well as stability. Examples are, the adaptive forgetting factor RLS algorithm (AFF-RLS), variable forgetting factor RLS (VFFRLS) and the extended recursive least squares (EX-KRLS) algorithm. The multiplication complexity of VFFRLS, AFF-RLS and EX-KRLS algorithms are 2.5N2 + 3N + 20 , 9N2 + 7N , and 15N3 + 7N2 + 2N + 4 respectively, while the RLS algorithm requires 2.5N2 + 3N .All the above well known algorithms require an accurate reference signal for their proper operation. In some cases, several additional operating parameters should be specified. For example, MRVSS needs twelve predefined parameters. As a result, its performance highly depends on the input signal.In this study, two adaptive beamforming algorithms have been proposed. They are called recursive least square - least mean square (RLMS) algorithm, and least mean square - least mean square (LLMS) algorithm. These algorithms have been proposed for meeting future beamforming requirements, such as very high convergence rate, robust to noise and flexible modes of operation. The RLMS algorithm makes use of two individual algorithm stages, based on the RLS and LMS algorithms, connected in tandem via an array image vector. On the other hand, the LLMS algorithm is a simpler version of the RLMS algorithm. It makes use of two LMS algorithm stages instead of the RLS – LMS combination as used in the RLMS algorithm.Unlike other adaptive beamforming algorithms, for both of these algorithms, the error signal of the second algorithm stage is fed back and combined with the error signal of the first algorithm stage to form an overall error signal for use update the tap weights of the first algorithm stage.Upon convergence, usually after few iterations, the proposed algorithms can be switched to the self-referencing mode. In this mode, the entire algorithm outputs are swapped, replacing their reference signals. In moving target applications, the array image vector, F, should also be updated to the new position. This scenario is also studied for both proposed algorithms. A simple and effective method for calculate the required array image vector is also proposed. Moreover, since the RLMS and the LLMS algorithms employ the array image vector in their operation, they can be used to generate fixed beams by pre-setting the values of the array image vector to the specified direction.The convergence of RLMS and LLMS algorithms is analyzed for two different operation modes; namely with external reference or self-referencing. Array image vector calculations, ranges of step sizes values for stable operation, fixed beam generation, and fixed-point arithmetic have also been studied in this thesis. All of these analyses have been confirmed by computer simulations for different signal conditions. Computer simulation results show that both proposed algorithms are superior in convergence performances to the algorithms, such as the CSLMS, MRVSS, LMS, VFFRLS and RLS algorithms, and are quite insensitive to variations in input SNR and the actual step size values used. Furthermore, RLMS and LLMS algorithms remain stable even when their reference signals are corrupted by additive white Gaussian noise (AWGN). In addition, they are robust when operating in the presence of Rayleigh fading. Finally, the fidelity of the signal at the output of the proposed algorithms beamformers is demonstrated by means of the resultant values of error vector magnitude (EVM), and scatter plots. It is also shown that, the implementation of an eight element uniform linear array using the proposed algorithms with a wordlength of nine bits is sufficient to achieve performance close to that provided by full precision

Source-channel coding for robust image transmission and for dirty-paper coding

In this dissertation, we studied two seemingly uncorrelated, but conceptually related problems in terms of source-channel coding: 1) wireless image transmission and 2) Costa ("dirty-paper") code design. In the first part of the dissertation, we consider progressive image transmission over a wireless system employing space-time coded OFDM. The space-time coded OFDM system based on a newly built broadband MIMO fading model is theoretically evaluated by assuming perfect channel state information (CSI) at the receiver for coherent detection. Then an adaptive modulation scheme is proposed to pick the constellation size that offers the best reconstructed image quality for each average signal-to-noise ratio (SNR). A more practical scenario is also considered without the assumption of perfect CSI. We employ low-complexity decision-feedback decoding for differentially space- time coded OFDM systems to exploit transmitter diversity. For JSCC, we adopt a product channel code structure that is proven to provide powerful error protection and bursty error correction. To further improve the system performance, we also apply the powerful iterative (turbo) coding techniques and propose the iterative decoding of differentially space-time coded multiple descriptions of images. The second part of the dissertation deals with practical dirty-paper code designs. We first invoke an information-theoretical interpretation of algebraic binning and motivate the code design guidelines in terms of source-channel coding. Then two dirty-paper code designs are proposed. The first is a nested turbo construction based on soft-output trellis-coded quantization (SOTCQ) for source coding and turbo trellis- coded modulation (TTCM) for channel coding. A novel procedure is devised to balance the dimensionalities of the equivalent lattice codes corresponding to SOTCQ and TTCM. The second dirty-paper code design employs TCQ and IRA codes for near-capacity performance. This is done by synergistically combining TCQ with IRA codes so that they work together as well as they do individually. Our TCQ/IRA design approaches the dirty-paper capacity limit at the low rate regime (e.g., < 1:0 bit/sample), while our nested SOTCQ/TTCM scheme provides the best performs so far at medium-to-high rates (e.g., >= 1:0 bit/sample). Thus the two proposed practical code designs are complementary to each other

Beamforming for OFDM based hybrid terrestrial satellite mobile system

EThOS - Electronic Theses Online ServiceGBUnited Kingdo