1,854 research outputs found
Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems
With the increasing digital services demand, performance and power-efficiency
become vital requirements for digital circuits and systems. However, the
enabling CMOS technology scaling has been facing significant challenges of
device uncertainties, such as process, voltage, and temperature variations. To
ensure system reliability, worst-case corner assumptions are usually made in
each design level. However, the over-pessimistic worst-case margin leads to
unnecessary power waste and performance loss as high as 2.2x. Since
optimizations are traditionally confined to each specific level, those safe
margins can hardly be properly exploited.
To tackle the challenge, it is therefore advised in this Ph.D. thesis to
perform a cross-layer optimization for digital signal processing circuits and
systems, to achieve a global balance of power consumption and output quality.
To conclude, the traditional over-pessimistic worst-case approach leads to
huge power waste. In contrast, the adaptive voltage scaling approach saves
power (25% for the CORDIC application) by providing a just-needed supply
voltage. The power saving is maximized (46% for CORDIC) when a more aggressive
voltage over-scaling scheme is applied. These sparsely occurred circuit errors
produced by aggressive voltage over-scaling are mitigated by higher level error
resilient designs. For functions like FFT and CORDIC, smart error mitigation
schemes were proposed to enhance reliability (soft-errors and timing-errors,
respectively). Applications like Massive MIMO systems are robust against lower
level errors, thanks to the intrinsically redundant antennas. This property
makes it applicable to embrace digital hardware that trades quality for power
savings.Comment: 190 page
Evaluating critical bits in arithmetic operations due to timing violations
Various error models are being used in simulation of voltage-scaled arithmetic units to examine application-level tolerance of timing violations. The selection of an error model needs further consideration, as differences in error models drastically affect the performance of the application. Specifically, floating point arithmetic units (FPUs) have architectural characteristics that characterize its behavior. We examine the architecture of FPUs and design a new error model, which we call Critical Bit. We run selected benchmark applications with Critical Bit and other widely used error injection models to demonstrate the differences
Reliability and security in low power circuits and systems
With the massive deployment of mobile devices in sensitive areas such as healthcare and defense, hardware reliability and security have become hot research topics in recent years. These topics, although different in definition, are usually correlated. This dissertation offers an in-depth treatment on enhancing the reliability and security of low power circuits and systems. The first part of the dissertation deals with the reliability of sub-threshold designs, which use supply voltage lower than the threshold voltage (Vth) of transistors to reduce power. The exponential relationship between delay and Vth significantly jeopardizes their reliability due to process variation induced timing violations. In order to address this problem, this dissertation proposes a novel selective body biasing scheme. In the first work, the selective body biasing problem is formulated as a linearly constrained statistical optimization model, and the adaptive filtering concept is borrowed from the signal processing community to develop an efficient solution. However, since the adaptive filtering algorithm lacks theoretical justification and guaranteed convergence rate, in the second work, a new approach based on semi-infinite programming with incremental hypercubic sampling is proposed, which demonstrates better solution quality with shorter runtime. The second work deals with the security of low power crypto-processors, equipped with Random Dynamic Voltage Scaling (RDVS), in the presence of Correlation Power Analysis (CPA) attacks. This dissertation firstly demonstrates that the resistance of RDVS to CPA can be undermined by lowering power supply voltage. Then, an alarm circuit is proposed to resist this attack. However, the alarm circuit will lead to potential denial-of-service due to noise-triggered false alarms. A non-zero sum game model is then formulated and the Nash Equilibria is analyzed --Abstract, page iii
Dependable Embedded Systems
This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems
Circuits and Systems Advances in Near Threshold Computing
Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing
Exploiting Adaptive Techniques to Improve Processor Energy Efficiency
Rapid device-miniaturization keeps on inducing challenges in building energy efficient microprocessors. As the size of the transistors continuously decreasing, more uncertainties emerge in their operations. On the other hand, integrating more and more transistors on a single chip accentuates the need to lower its supply-voltage. This dissertation investigates one of the primary device uncertainties - timing error, in microprocessor performance bottleneck in NTC era. Then it proposes various innovative techniques to exploit these opportunities to maintain processor energy efficiency, in the context of emerging challenges. Evaluated with the cross-layer methodology, the proposed approaches achieve substantial improvements in processor energy efficiency, compared to other start-of-art techniques
Recommended from our members
Active timing margin management to improve microprocessor power efficiency
Improving power/performance efficiency is critical for today’s micro- processors. From edge devices to datacenters, lower power or higher performance always produces better systems, measured by lower cost of ownership or longer battery time. This thesis studies improving microprocessor power/performance efficiency by optimizing the pipeline timing margin. In particular, this thesis focuses on improving the efficacy of Active Timing Margin, a young technology that dynamically adjusts the margin.
Active timing margin trims down the pipeline timing margin with a control loop that adjusts voltage and frequency based on real-time chip environment monitoring. The key insight of this thesis is that in order to maximize active timing margin’s efficiency enhancement benefits, synergistic management from processor architecture design and system software scheduling are needed. To that end, this thesis covers the major consumers of pipeline timing margin, including temperature, voltage, and process variation. For temperature variation, the thesis proposes a table-lookup based active timing margin mechanism, and an associated temperature management scheme to minimize power consumption. For voltage variation, the thesis characterizes the limiting factors of adaptive clocking’s power saving and proposes application scheduling to maximize total system power reduction. For process variation, the thesis proposes core-level adaptive clocking reconfiguration to automatically expose inter-core variation and discusses workload scheduling and throttling management to control critical application performance.
The author believes the optimization presented in this thesis can potentially benefit a variety of processor architectures as the conclusions are based on the solid measurement on state-of-the-art processors, and the research objective, active timing margin, already has wide applicability in the latest microprocessors by the time this thesis is written.Electrical and Computer Engineerin
- …