On Efficiency and Validity of Previous Homeplug MAC Performance Analysis

The Medium Access Control protocol of Power Line Communication networks (defined in Homeplug and IEEE 1901 standards) has received relatively modest attention from the research community. As a consequence, there is only one analytic model that complies with the standardised MAC procedures and considers unsaturated conditions. We identify two important limitations of the existing analytic model: high computational expense and predicted results just prior to the predicted saturation point do not correspond to long-term network performance. In this work, we present a simplification of the previously defined analytic model of Homeplug MAC able to substantially reduce its complexity and demonstrate that the previous performance results just before predicted saturation correspond to a transitory phase. We determine that the causes of previous misprediction are common analytical assumptions and the potential occurrence of a transitory phase, that we show to be of extremely long duration under certain circumstances. We also provide techniques, both analytical and experimental, to correctly predict long-term behaviour and analyse the effect of specific Homeplug/IEEE 1901 features on the magnitude of misprediction errors

Analysis and evaluation of in-home networks based on HomePlug-AV power line communications

[ESP] No hace mucho tiempo, las redes in-home (también denominadas redes domésticas) únicamente se utilizaban para interconectar los diferentes ordenadores de una vivienda, de manera que pudieran compartir una impresora entre ellos. Hoy en día, sin embargo, esta definición es mucho más amplia debido a la gran cantidad de dispositivos existentes en la vivienda con capacidad de conectarse a una red para transmitir y recibir información. En una red in-home actual, podemos encontrar desde teléfonos móviles equipados con conectividad WI-FI a dispositivos NAS (Network Attached Storage), utilizados para almacenar información, imágenes o videos en red, que a su vez pueden ser transferidos a televisiones de alta definición u ordenadores. A la hora de instalar una red de comunicaciones en una vivienda, se persiguen principalmente dos objetivos, reducir el coste de instalación y conseguir una gran flexibilidad de cara a futuras ampliaciones. Una red basada en tecnología PLC (Power Line Communications) cumple estos requisitos ya que, al utilizar la infraestructura de cableado eléctrico existente en la vivienda, es muy sencilla y económica de instalar y ampliar. Dentro de la tecnología PLC existen diferentes estándares, siendo HomePlug-AV (HomePlug Audio-Video o simplemente HPAV) el más extendido en la actualidad para la instalación de redes domésticas. Este estándar permite alcanzar velocidades de transmisión de hasta 200Mbps a través de los cables de baja tensión de una vivienda convencional. El objetivo principal de esta tesis doctoral es aportar nuevas ideas que mejoren las prestaciones de las redes in-home basadas en la tecnología PLC, utilizando como base el estándar Homeplug-AV. Estas redes utilizan una arquitectura centralizada, en la que la mayor parte de la inteligencia de red está concentrada en un coordinador central (CCo, por sus siglas en inglés). Por lo tanto, la mayor parte de las modificaciones propuestas irán encaminadas a mejorar dicho dispositivo, que podrá llegar a convertirse en un gestor de red capaz de manejar conjuntamente interfaces de diferentes tecnologías. En primer lugar, se presenta un análisis detallado del comportamiento del estándar en diferentes situaciones que se pueden producir de manera común en una red doméstica. Este análisis se realizó tanto con dispositivos reales como mediante simulación. Para el segundo tipo de medidas, se diseñó un simulador de la tecnología HomePlug que implementa el nivel físico y el nivel MAC de la misma, junto con modelos de los servicios más utilizados en entornos domésticos. Este simulador se utilizó tanto para estas medidas iniciales como para evaluar las diferentes modificaciones del estándar propuestas posteriormente en este trabajo. Este análisis proporcionó dos resultados significativos. En primer lugar, se comprobó que al introducir un modelo real de nivel físico al protocolo CSMA/CA utilizado a nivel MAC se producían resultados muy diferentes a los presentados en los modelos publicados hasta ese momento. Por ello, se propuso un modelo matemático que incorporaba dichos efectos. En segundo lugar, se identificaron diferentes áreas de la tecnología que eran susceptibles de mejora. El resto de la tesis se centró entonces en la mejora de dichos puntos débiles. El primero de estos puntos débiles está relacionado con las transmisión de datos unicast. El medio PLC es selectivo en frecuencia y muy dependiente del tiempo y de la localización de las estaciones. Incluso es posible que, en un mismo enlace, la capacidad de los enlaces ascendente y descendente sea distinta. En estos entornos, la utilización del protocolo de transporte TCP presenta serios problemas, ya que define gran parte de sus parámetros en función del Round Trip time (RTT) del enlace. Como alternativa se pensó en los códigos Fountain. Este tipo de codificación de fuente permite realizar transmisiones fiables de datos sin necesidad de utilizar un canal de retorno, evitando de esta forma los problemas derivados de las asimetrías de la red. Se realizaron varios experimentos comparando ambas soluciones, y se comprobó que las prestaciones de este tipo de codificaciones superan al protocolo TCP a la hora de transmitir ficheros de manera fiable a través de las redes PLC. Además, los códigos Fountain también se utilizaron para el diseño de otra aplicación. Es muy común que en un escenario doméstico haya disponible más de una tecnología (Wi-Fi, Ethernet, PLC, etc). Tenemos por tanto que una aplicación capaz de integrar interfaces de diferentes tecnologías podría ser muy útil en estos entornos, ya que se podría conseguir un mayor ancho de banda, mayor tolerancia a errores, balanceo de carga, etc. El kernel de Linux dispone de un módulo denominado Bonding que permite agrupar diferentes interfaces Ethernet. Sin embargo, no está preparado para agrupar interfaces de diferentes tecnologías, y mucho menos para tecnologás de capacidad variable como es el caso de PLC o de las comunicaciones inalámbricas. Por ello, se realizó una modificación de dicho driver utilizando para ello los códigos Fountain, que solucionan los problemas que se pueden producir debido a las variaciones de capacidad. Por otra parte, con la actual versión del estándar HomePlug AV, las comunicaciones multicast presentan unas prestaciones muy pobres. Esto es debido a que, a pesar de que el canal PLC es broadcast, la naturaleza de la modulación OFDM (Ortogonal Frequency Division Multiplexing) que se utiliza a nivel físico es punto a punto. Esto hace que las transmisiones simultáneas a un grupo de receptores se traduzcan automáticamente en sucesivas transmisiones punto a punto a los diferentes miembros del grupo. Con esta técnica, la capacidad efectiva de transmisión multicast disminuye de manera muy importante a medida que aumenta el número de receptores. En este trabajo se han propuesto dos técnicas alternativas. La primera consiste en la utilización de un mapa de tonos común para todos los miembros del grupo multicast, asignado a estas comunicaciones los parámetros de modulación del cliente con las peores condiciones de canal. Este algoritmo ha sido tradicionalmente descartado en los sistemas OFDM por sus bajas prestaciones. Sin embargo, la correlación existente entre los diferentes canales de una red PLC hace que su comportamiento sea mucho mejor. Además, se propuso un segundo algoritmo que utilizaba técnicas de optimización para maximizar la tasa de comunicación multicast, obteniendo un mejor comportamiento cuando el número de clientes es elevado. Por último, en redes de capacidad física variable, como es el caso de las redes PLC, las técnicas cross-layer están despertando un gran interés. Este tipo de algoritmos están basado en la compartición de información entre diferentes capas de la estructura OSI para mejorar el comportamiento del sistema. En este trabajo se ha propuesto un algoritmo que modifica los parámetros del protocolo CSMA/CA de nivel MAC utilizando información de nivel físico y los requerimientos de QoS del servicio de niveles superiores. De esta forma se consigue dar prioridad en el acceso al medio a los clientes con problemas de QoS, mejorando de esta forma del comportamiento de la red. Este algoritmo ha sido evaluado mediante simulación en un escenario doméstico típico, comprobando que ofrece unos resultados muy prometedores. [ENG] Not very long time ago, in-home networks (also called domestic networks) were only used to share a printer between a number of computers. Nowadays, however, due to the huge amount of devices present at home with communication capabilities, this definition has become much wider. In a current in-home network we can find, from mobile phones with wireless connectivity, or NAS (Network Attached Storage) devices sharing multimedia content with high-definition televisions or computers. When installing a communications network in a home, two objectives are mainly pursued: Reducing cost and high flexibility in supporting future network requirements. A network based on Power Line Communications (PLC) technology is able to fulfill these objectives, since as it uses the low voltage wiring already available at home, it is very easy to install and expand, providing a cost-effective solution for home environments. There are different PLC standards, being HomePlug-AV (HomePlug Audio-Video, or simply HPAV) the most widely used nowadays. This standard is able to achieve transmission rates up to 200 Mpbs through the electrical wiring of a typical home. The main objective of this thesis is to provide new ideas to improve the performance of PLC technology based in-home networks, using as starting point the HPAV standard. A network based on this technology uses a centralized architecture, in which the most important part of the network intelligence is concentrated in a single device, the Central Coordinator (CCo). Hence, most of the modifications proposed in this work will try to improve this particular device, which can even become a multi-technology central manager, able to combine interfaces of different technologies to improve the network performance. Initially, it is presented a detailed analysis of HPAV performance in some scenarios typically found in a home environment. It was done through simulation and by experimentation using real devices. To obtain the former results, it was designed a HPAV simulator which implements the physical (PHY) and medium access control (MAC) layers of the standard, together with a traffic modeling module which implements the services most commonly found in a home network. This simulation tool was used both in these initial measurements and to evaluate the standard modifications that are proposed in this work. This analysis provides two main results. Firstly, it was found that when a real PHY model is used together with the CSMA/CA MAC protocol the simulation results were very different to those obtained with previously presented mathematical models of this protocol. Hence, it was proposed a new model that considers these effects. Next, some areas of the technology which could be improved were identified. The rest of the thesis was then centered around proposing solutions to these weaknesses. The first weakness solved is related to unicast data transmission. PLC medium is frequency selective and time variant, and it presents a remarkable variation among locations or depending on the connected loads. Even in a single link, the channel capacities between transmitter and receiver can be very asymmetric. In such environments, the use of TCP as transport protocol presents serious problems, since it defines some of its parameters according to the Round Trip Time (RTT). Alternatively, the use of Fountain codes for reliable data transmission in these environments was proposed. These codes allow to transmit information without a feedback channel, overcoming in this way the problems related to the variability of the channel. Different experiments were performed comparing both solutions, concluding that in PLC based networks the performance achieved by Fountain codes outperforms the results obtained with a TCP-based application. In addition, Fountain codes were also used for another application. In home environments, it is very common to find more than one available technology to deploy a network (Wi-Fi, Ethernet, PLC, etc). Therefore, an application that makes possible the aggregation of different interfaces would be very useful, as it will provide higher bandwidth, fault tolerance and load balancing. The Linux Kernel contains a driver (Bonding) which allows Ethernet interfaces aggregation. However, it is not prepared for asymmetric interfaces aggregation and even less for variable capacity technologies like PLC or Wi-Fi. In this work, it is presented a modification of this driver which uses Fountain codes to solve the problems that may arise when asymmetric interfaces are aggregated. On another note, multicast communications in the actual HPAV standard versions presents serious problems. This is because, although PLC medium is broadcast by nature, the Orthogonal Frequency Division Multiplexing (OFDM) modulation used at PHY layer is always point to point. Therefore, multicast communications are carried out as successive point-to-point transmissions to the different members of the group. This technique clearly degrades the performance of multicast services as the number of receivers increases. In this work, they have been proposed two alternative algorithms. The first one consists of using a common tone map for all the multicast group members. This tone map corresponds to the modulation parameters obtained for the client with the worst channel conditions. This algorithm has been traditionally discarded in OFDM systems because of its poor performance. However, in contrast to other technologies (like wireless for example), channel responses in a given PLC network exhibit significant correlation among them. This reduces the differences among the users, improving the performance of this algorithm. In addition, another technique which uses an optimization algorithm to maximize the multicast bit rate is also evaluated, obtaining that its use can be suitable when the number of multicast clients is high. Finally, due to the properties of PLC medium, cross-layer technique are eliciting a big interest. These algorithms are based in the information sharing between adjacent layers in the OSI model to improve the system behavior. In this work, it has been proposed an extension of the HPAV CSMA/CA algorithm which modifies the protocol parameters using PHY layer information and the QoS requirements of the upper-layer services. In this way, priority access to the channel can be provided to the nodes with QoS problems, improving the whole network performance. This algorithm has been evaluated through simulation in a typical home environment with very promising results.Universidad Politécnica de Cartagen

Analysis and Enhancement of CSMA/CA with Deferral in Power-Line Communications

Power-line communications are employed in home networking to provide easy and high-throughput connectivity. The IEEE 1901, the MAC protocol for power-line networks, employs a CSMA/CA protocol similar to that of 802.11, but is substantially more complex, which probably explains why little is known about its performance. One of the key differences between the two protocols is that whereas 802.11 only reacts upon collisions, 1901 also reacts upon several consecutive transmissions and thus can potentially achieve better performance by avoiding unnecessary collisions. In this paper, we propose a model for the 1901 MAC. Our analysis reveals that the default configuration of 1901 does not fully exploit its potential and that its performance degrades with the number of stations. Based on analytical reasoning, we derive a configuration for the parameters of 1901 that drastically improves throughput and achieves optimal performance without requiring the knowledge of the number of stations in the network. In contrast, 802.11 requires knowing the number of contending stations to provide a similar performance, which is unfeasible for realistic traffic patterns. We confirm our results and enhancement with testbed measurements, by implementing the 1901 MAC protocol on WiFi hardware.Publicad

Techniques for broadband power line communications: impulsive noise mitigation and adaptive modulation

The development of power line communication systems for broadband multimedia applications requires a comprehensive knowledge of the channel characteristics and the main peculiarities that may influence the communication over this channel. PLC has the potential to become the preferred connectivity solution to homes and offices. Additionally, indoor power line networks can serve as local area networks offering high-speed data, audio, video and multimedia applications. The PLC technology eliminates the need for new wires by using an already-existing infrastructure that is much more pervasive than any other wired system. Power line networks, however, present a hostile channel for communication signals. Noise, multipath, selective fading and attenuation are well-known peculiarities of power line grids and. Particularly, random impulsive noise characterized with short durations and very high amplitudes is identified as one of the major impairments that degrade the performance of PLC systems. Orthogonal frequency division multiplexing (OFDM) is the technique of choice for broadband PLC systems. OFDM minimizes the effects of multipath and provides high robustness against selective fading. It is also powerful in impulsive noise environments and performs better than single-carrier modulation methods. If an OFDM symbol is affected by impulsive noise, the effect is spread over multiple subcarriers due to the discrete Fourier transform at the receiver. In order to achieve reliable outcomes, suitable channel and noise models must be used in the investigations. In this thesis, the power line channel transfer function is modelled using a multipath model that was proposed by Zimmermann and Dostert [1], [2]. This model describes the signal propagation scenario and attenuation effects in power line networks. To represent the actual noise scenario in power networks, the noise is classified into two main classes: background noise and impulsive noise. To reduce the effect of impulsive noise, conventional time domain nonlinearities are examined in this thesis under PLC environments. An adaptive-threshold selection method based on minimum bit-error rate (BER) is proposed. At the cost of additional complexity, the effect of impulsive noise is further mitigated using a novel joint time-domain/frequency-domain suppression technique. Since channel coding is essential for most telecommunication systems, we examine convolutional codes combined with interleaving in a PLC channel impaired with AWGN and impulsive noise. The results show substantial performance gains especially in heavily-disturbed environments, where signal-to-noise ratio (SNR) gains of more than 15 dB can be achieved with a code rate of 1/3. Bit-interleaved convolutionally-coded OFDM completely eliminates the effect of impulsive noise in weakly-disturbed noise environments, while a negligible effect may remain in medium-disturbed environments. A new power-loading algorithm that minimizes the transmission power for target BER and data rate constraints is introduced in later chapters of the thesis. Results indicate that the algorithm achieves performance gains of more than 4 dB SNR over conventional OFDM systems. Furthermore, a novel minimum-complexity bit-loading algorithm that maximizes the data rate given BER and power level constraints is proposed in chapter 6. Results show that this bit-loading algorithm achieves almost identical performance as the incremental algorithm but with much lower complexity

Reducing Internet Latency : A Survey of Techniques and their Merit

Bob Briscoe, Anna Brunstrom, Andreas Petlund, David Hayes, David Ros, Ing-Jyh Tsang, Stein Gjessing, Gorry Fairhurst, Carsten Griwodz, Michael WelzlPeer reviewedPreprin

Systematic Approaches for Telemedicine and Data Coordination for COVID-19 in Baja California, Mexico

Conference proceedings info: ICICT 2023: 2023 The 6th International Conference on Information and Computer Technologies Raleigh, HI, United States, March 24-26, 2023 Pages 529-542We provide a model for systematic implementation of telemedicine within a large evaluation center for COVID-19 in the area of Baja California, Mexico. Our model is based on human-centric design factors and cross disciplinary collaborations for scalable data-driven enablement of smartphone, cellular, and video Teleconsul-tation technologies to link hospitals, clinics, and emergency medical services for point-of-care assessments of COVID testing, and for subsequent treatment and quar-antine decisions. A multidisciplinary team was rapidly created, in cooperation with different institutions, including: the Autonomous University of Baja California, the Ministry of Health, the Command, Communication and Computer Control Center of the Ministry of the State of Baja California (C4), Colleges of Medicine, and the College of Psychologists. Our objective is to provide information to the public and to evaluate COVID-19 in real time and to track, regional, municipal, and state-wide data in real time that informs supply chains and resource allocation with the anticipation of a surge in COVID-19 cases. RESUMEN Proporcionamos un modelo para la implementación sistemática de la telemedicina dentro de un gran centro de evaluación de COVID-19 en el área de Baja California, México. Nuestro modelo se basa en factores de diseño centrados en el ser humano y colaboraciones interdisciplinarias para la habilitación escalable basada en datos de tecnologías de teleconsulta de teléfonos inteligentes, celulares y video para vincular hospitales, clínicas y servicios médicos de emergencia para evaluaciones de COVID en el punto de atención. pruebas, y para el tratamiento posterior y decisiones de cuarentena. Rápidamente se creó un equipo multidisciplinario, en cooperación con diferentes instituciones, entre ellas: la Universidad Autónoma de Baja California, la Secretaría de Salud, el Centro de Comando, Comunicaciones y Control Informático. de la Secretaría del Estado de Baja California (C4), Facultades de Medicina y Colegio de Psicólogos. Nuestro objetivo es proporcionar información al público y evaluar COVID-19 en tiempo real y rastrear datos regionales, municipales y estatales en tiempo real que informan las cadenas de suministro y la asignación de recursos con la anticipación de un aumento de COVID-19. 19 casos.ICICT 2023: 2023 The 6th International Conference on Information and Computer Technologieshttps://doi.org/10.1007/978-981-99-3236-

Anales del XIII Congreso Argentino de Ciencias de la Computación (CACIC)

Contenido: Arquitecturas de computadoras Sistemas embebidos Arquitecturas orientadas a servicios (SOA) Redes de comunicaciones Redes heterogéneas Redes de Avanzada Redes inalámbricas Redes móviles Redes activas Administración y monitoreo de redes y servicios Calidad de Servicio (QoS, SLAs) Seguridad informática y autenticación, privacidad Infraestructura para firma digital y certificados digitales Análisis y detección de vulnerabilidades Sistemas operativos Sistemas P2P Middleware Infraestructura para grid Servicios de integración (Web Services o .Net)Red de Universidades con Carreras en Informática (RedUNCI

Anales del XIII Congreso Argentino de Ciencias de la Computación (CACIC)

Contenido: Arquitecturas de computadoras Sistemas embebidos Arquitecturas orientadas a servicios (SOA) Redes de comunicaciones Redes heterogéneas Redes de Avanzada Redes inalámbricas Redes móviles Redes activas Administración y monitoreo de redes y servicios Calidad de Servicio (QoS, SLAs) Seguridad informática y autenticación, privacidad Infraestructura para firma digital y certificados digitales Análisis y detección de vulnerabilidades Sistemas operativos Sistemas P2P Middleware Infraestructura para grid Servicios de integración (Web Services o .Net)Red de Universidades con Carreras en Informática (RedUNCI

Proceedings of the 7th International Conference EEDAL 2013 Energy Efficiency in Domestic Appliances and Lighting

This book contains the papers presented at the seventh international conference on Energy Efficiency in Domestic Appliances and Lighting. EEDAL'2013 was organised in Coimbra, Portugal in September 2013. This major international conference, which was previously been staged in Florence 1997, Naples 2000, Turin 2003, London 2006, B2e0r0l9in, Copenhagen 2011 has been very successful in attracting an international community of stakeholders dealing with residential appliances, equipment, metering liagnhdti ng (including manufacturers, retailers, consumers, governments, international organisations aangde ncies, academia and experts) to discuss the progress achieved in technologies, behavioural aspects and poliacineds , the strategies that need to be implemented to further progress this important work. Potential readers who may benefit from this book include researchers, engineers, policymakers, and all those who can influence the design, selection, application, and operation of electrical appliances and lighting.JRC.F.7-Renewables and Energy Efficienc