Adaptation of Topology-Based Routing Protocols for Data Gathering Applications in VANETs

International audienceThe use of VANETs for data gathering applications imply that vehicles are not only able to generate data but also to forward it from others towards an access point (AP). Given the mobility characteristics of vehicles and the difficult propagation conditions of urban scenarios, it is commonly stated that topology-based routing solutions are less efficient than geographic-based routing solutions. However, these statements refer to generic vehicular communications, ignoring specific characteristics of data gathering scenarios. In this work, two existing routing protocols that prior to forwarding data, set a path from each vehicle towards the AP are adapted for data gathering applications. While the existence of a path reduces the number of ineffective retransmissions and the delay, it also increases the overhead, and therefore the presented protocols were adapted to improve the overall performance. Aiming to correctly evaluate the routing protocols, simulations are launched using a realistic trace from the city of Cologne. The results obtained show that it is possible to limit the overhead associated to topology updates, outperforming geographic-based solutions

Towards video streaming in IoT environments: vehicular communication perspective

Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues

On the Experimental Evaluation of Vehicular Networks: Issues, Requirements and Methodology Applied to a Real Use Case

One of the most challenging fields in vehicular communications has been the experimental assessment of protocols and novel technologies. Researchers usually tend to simulate vehicular scenarios and/or partially validate new contributions in the area by using constrained testbeds and carrying out minor tests. In this line, the present work reviews the issues that pioneers in the area of vehicular communications and, in general, in telematics, have to deal with if they want to perform a good evaluation campaign by real testing. The key needs for a good experimental evaluation is the use of proper software tools for gathering testing data, post-processing and generating relevant figures of merit and, finally, properly showing the most important results. For this reason, a key contribution of this paper is the presentation of an evaluation environment called AnaVANET, which covers the previous needs. By using this tool and presenting a reference case of study, a generic testing methodology is described and applied. This way, the usage of the IPv6 protocol over a vehicle-to-vehicle routing protocol, and supporting IETF-based network mobility, is tested at the same time the main features of the AnaVANET system are presented. This work contributes in laying the foundations for a proper experimental evaluation of vehicular networks and will be useful for many researchers in the area.Comment: in EAI Endorsed Transactions on Industrial Networks and Intelligent Systems, 201

Network parameters impact on dynamic transmission power control in vehicular ad hoc networks

International audienceIn vehicular ad hoc networks, the dynamic change in transmission power is very effective to increase the throughput of the wireless vehicular network and decrease the delay of the message communication between vehicular nodes on the highway. Whenever an event occurs on the highway, the reliability of the communication in the vehicular network becomes so vital so that event created messages should reach to all the moving network nodes. It becomes necessary that there should be no interference from outside of the network and all the neighbor nodes should lie in the transmission range of the reference vehicular node. Transmission range is directly proportional to the transmission power the moving node. If the transmission power will be high, the interference increases that can cause higher delay in message reception at receiver end, hence the performance of the network decreased. In this paper, it is analyzed that how transmission power can be controlled by considering other different parameter of the network such as; density, distance between moving nodes, different types of messages dissemination with their priority, selection of an antenna also affects the transmission power. The dynamic control of transmission power in VANET serves also for the optimization of the resources where it needs, can be decreased and increased depending on the circumstances of the network. Different applications and events of different types also cause changes in transmission power to enhance the reachability. The analysis in this paper is comprised of density, distance with single hop and multi hop message broadcasting based dynamic transmission power control as well as antenna selection and applications based. Some summarized tables are produced according to the respective parameters of the vehicular network. At the end some valuable observations are made and discussed in detail

From MANET to people-centric networking: Milestones and open research challenges

In this paper, we discuss the state of the art of (mobile) multi-hop ad hoc networking with the aim to present the current status of the research activities and identify the consolidated research areas, with limited research opportunities, and the hot and emerging research areas for which further research is required. We start by briefly discussing the MANET paradigm, and why the research on MANET protocols is now a cold research topic. Then we analyze the active research areas. Specifically, after discussing the wireless-network technologies, we analyze four successful ad hoc networking paradigms, mesh networks, opportunistic networks, vehicular networks, and sensor networks that emerged from the MANET world. We also present an emerging research direction in the multi-hop ad hoc networking field: people centric networking, triggered by the increasing penetration of the smartphones in everyday life, which is generating a people-centric revolution in computing and communications

Information collection algorithm for vehicular ad-hoc networks (application domain: Urban Traffic Wireless Vehicular Ad-Hoc Networks (VANETs))

Vehicle to vehicle communication (V2VC) is one of the modern approaches for exchanging and generating traffic information with (yet to be realized) potential to improve road safety, driving comfort and traffic control. In this research, we present a novel algorithm which is based on V2V communication, uses in-vehicle sensor information and in collaboration with the other vehicles' sensor information can detect road conditions and determine the geographical area where this road condition exists – e.g. geographical area where there is traffic density, unusual traffic behaviour, a range of weather conditions (raining), etc. The algorithms' built-in automatic geographical restriction of the data collection, aggregation and dissemination mechanisms allows warning messages to be received by any car, not necessarily sharing the identified road condition, which may then be used to identify the optimum route taken by the vehicle e.g. avoid bottlenecks or dangerous areas including accidents or congestions on their current routes. This research covers the middle ground between MANET [1] and collaborative data generation based on knowledge granularity (aggregation). It investigates the possibility of designing, implementing and modelling of the functionality of an algorithm (as part of the design of an intelligent node in an Intelligent Transportation System - ITS) that ensures active participation in the formation, routing and general network support of MANETs and also helps in-car traffic information and real-time control generation and distribution. The work is natural extension of the efforts of several large EU projects like DRIVE [2], GST [3] and SAFESPOT [4]