4,454 research outputs found
System-on-chip Computing and Interconnection Architectures for Telecommunications and Signal Processing
This dissertation proposes novel architectures and design techniques targeting SoC building blocks for telecommunications and signal processing applications.
Hardware implementation of Low-Density Parity-Check decoders is approached at both the algorithmic and the architecture level. Low-Density Parity-Check codes are a promising coding scheme for future communication standards due to their outstanding error correction performance.
This work proposes a methodology for analyzing effects of finite precision arithmetic on error correction performance and hardware complexity. The methodology is throughout employed for co-designing the decoder. First, a low-complexity check node based on the P-output decoding principle is designed and characterized on a CMOS standard-cells library. Results demonstrate implementation loss below 0.2 dB down to BER of 10^{-8} and a saving in complexity up to 59% with respect to other works in recent literature. High-throughput and low-latency issues are addressed with modified single-phase decoding schedules. A new "memory-aware" schedule is proposed requiring down to 20% of memory with respect to the traditional two-phase flooding decoding. Additionally, throughput is doubled and logic complexity reduced of 12%. These advantages are traded-off with error correction performance, thus making the solution attractive only for long codes, as those adopted in the DVB-S2 standard. The "layered decoding" principle is extended to those codes not specifically conceived for this technique. Proposed architectures exhibit complexity savings in the order of 40% for both area and power consumption figures, while implementation loss is smaller than 0.05 dB.
Most modern communication standards employ Orthogonal Frequency Division Multiplexing as part of their physical layer. The core of OFDM is the Fast Fourier Transform and its inverse in charge of symbols (de)modulation. Requirements on throughput and energy efficiency call for FFT hardware implementation, while ubiquity of FFT suggests the design of parametric, re-configurable and re-usable IP hardware macrocells. In this context, this thesis describes an FFT/IFFT core compiler particularly suited for implementation of OFDM communication systems. The tool employs an accuracy-driven configuration engine which automatically profiles the internal arithmetic and generates a core with minimum operands bit-width and thus minimum circuit complexity. The engine performs a closed-loop optimization over three different internal arithmetic models (fixed-point, block floating-point and convergent block floating-point) using the numerical accuracy budget given by the user as a reference point. The flexibility and re-usability of the proposed macrocell are illustrated through several case studies which encompass all current state-of-the-art OFDM communications standards (WLAN, WMAN, xDSL, DVB-T/H, DAB and UWB). Implementations results are presented for two deep sub-micron standard-cells libraries (65 and 90 nm) and commercially available FPGA devices. Compared with other FFT core compilers, the proposed environment produces macrocells with lower circuit complexity and same system level performance (throughput, transform size and numerical accuracy).
The final part of this dissertation focuses on the Network-on-Chip design paradigm whose goal is building scalable communication infrastructures connecting hundreds of core. A low-complexity link architecture for mesochronous on-chip communication is discussed. The link enables skew constraint looseness in the clock tree synthesis, frequency speed-up, power consumption reduction and faster back-end turnarounds. The proposed architecture reaches a maximum clock frequency of 1 GHz on 65 nm low-leakage CMOS standard-cells library. In a complex test case with a full-blown NoC infrastructure, the link overhead is only 3% of chip area and 0.5% of leakage power consumption.
Finally, a new methodology, named metacoding, is proposed. Metacoding generates correct-by-construction technology independent RTL codebases for NoC building blocks. The RTL coding phase is abstracted and modeled with an Object Oriented framework, integrated within a commercial tool for IP packaging (Synopsys CoreTools suite). Compared with traditional coding styles based on pre-processor directives, metacoding produces 65% smaller codebases and reduces the configurations to verify up to three orders of magnitude
A differential memristive synapse circuit for on-line learning in neuromorphic computing systems
Spike-based learning with memristive devices in neuromorphic computing
architectures typically uses learning circuits that require overlapping pulses
from pre- and post-synaptic nodes. This imposes severe constraints on the
length of the pulses transmitted in the network, and on the network's
throughput. Furthermore, most of these circuits do not decouple the currents
flowing through memristive devices from the one stimulating the target neuron.
This can be a problem when using devices with high conductance values, because
of the resulting large currents. In this paper we propose a novel circuit that
decouples the current produced by the memristive device from the one used to
stimulate the post-synaptic neuron, by using a novel differential scheme based
on the Gilbert normalizer circuit. We show how this circuit is useful for
reducing the effect of variability in the memristive devices, and how it is
ideally suited for spike-based learning mechanisms that do not require
overlapping pre- and post-synaptic pulses. We demonstrate the features of the
proposed synapse circuit with SPICE simulations, and validate its learning
properties with high-level behavioral network simulations which use a
stochastic gradient descent learning rule in two classification tasks.Comment: 18 Pages main text, 9 pages of supplementary text, 19 figures.
Patente
Neuromorphic Hardware In The Loop: Training a Deep Spiking Network on the BrainScaleS Wafer-Scale System
Emulating spiking neural networks on analog neuromorphic hardware offers
several advantages over simulating them on conventional computers, particularly
in terms of speed and energy consumption. However, this usually comes at the
cost of reduced control over the dynamics of the emulated networks. In this
paper, we demonstrate how iterative training of a hardware-emulated network can
compensate for anomalies induced by the analog substrate. We first convert a
deep neural network trained in software to a spiking network on the BrainScaleS
wafer-scale neuromorphic system, thereby enabling an acceleration factor of 10
000 compared to the biological time domain. This mapping is followed by the
in-the-loop training, where in each training step, the network activity is
first recorded in hardware and then used to compute the parameter updates in
software via backpropagation. An essential finding is that the parameter
updates do not have to be precise, but only need to approximately follow the
correct gradient, which simplifies the computation of updates. Using this
approach, after only several tens of iterations, the spiking network shows an
accuracy close to the ideal software-emulated prototype. The presented
techniques show that deep spiking networks emulated on analog neuromorphic
devices can attain good computational performance despite the inherent
variations of the analog substrate.Comment: 8 pages, 10 figures, submitted to IJCNN 201
Recommended from our members
Noise shaping Asynchronous SAR ADC based time to digital converter
Time-to-digital converters (TDCs) are key elements for the digitization of timing information in modern mixed-signal circuits such as digital PLLs, DLLs, ADCs, and on-chip jitter-monitoring circuits. Especially, high-resolution TDCs are increasingly employed in on-chip timing tests, such as jitter and clock skew measurements, as advanced fabrication technologies allow fine on-chip time resolutions. Its main purpose is to quantize the time interval of a pulse signal or the time interval between the rising edges of two clock signals. Similarly to ADCs, the performance of TDCs are also primarily characterized by Resolution, Sampling Rate, FOM, SNDR, Dynamic Range and DNL/INL. This work proposes and demonstrates 2nd order noise shaping Asynchronous SAR ADC based TDC architecture with highest resolution of 0.25 ps among current state of art designs with respect to post-layout simulation results. This circuit is a combination of low power/High Resolution 2nd Order Noise Shaped Asynchronous SAR ADC backend with simple Time to Amplitude converter (TAC) front-end and is implemented in 40nm CMOS technology. Additionally, special emphasis is given on the discussion on various current state of art TDC architectures.Electrical and Computer Engineerin
Hardware implementation of daubechies wavelet transforms using folded AIQ mapping
The Discrete Wavelet Transform (DWT) is a popular tool in the field of image and video compression applications. Because of its multi-resolution representation capability, the DWT has been used effectively in applications such as transient signal analysis, computer vision, texture analysis, cell detection, and image compression. Daubechies wavelets are one of the popular transforms in the wavelet family. Daubechies filters provide excellent spatial and spectral locality-properties which make them useful in image compression.
In this thesis, we present an efficient implementation of a shared hardware core to compute two 8-point Daubechies wavelet transforms. The architecture is based on a new two-level folded mapping technique, an improved version of the Algebraic Integer Quantization (AIQ). The scheme is developed on the factorization and decomposition of the transform coefficients that exploits the symmetrical and wrapping structure of the matrices. The proposed architecture is parallel, pipelined, and multiplexed. Compared to existing designs, the proposed scheme reduces significantly the hardware cost, critical path delay and power consumption with a higher throughput rate.
Later, we have briefly presented a new mapping scheme to error-freely compute the Daubechies-8 tap wavelet transform, which is the next transform of Daubechies-6 in the Daubechies wavelet series. The multidimensional technique maps the irrational transformation basis coefficients with integers and results in considerable reduction in hardware and power consumption, and significant improvement in image reconstruction quality
Vector processing-aware advanced clock-gating techniques for low-power fused multiply-add
The need for power efficiency is driving a rethink of design decisions in processor architectures. While vector processors succeeded in the high-performance market in the past, they need a retailoring for the mobile market that they are entering now. Floating-point (FP) fused multiply-add (FMA), being a functional unit with high power consumption, deserves special attention. Although clock gating is a well-known method to reduce switching power in synchronous designs, there are unexplored opportunities for its application to vector processors, especially when considering active operating mode. In this research, we comprehensively identify, propose, and evaluate the most suitable clock-gating techniques for vector FMA units (VFUs). These techniques ensure power savings without jeopardizing the timing. We evaluate the proposed techniques using both synthetic and “real-world” application-based benchmarking. Using vector masking and vector multilane-aware clock gating, we report power reductions of up to 52%, assuming active VFU operating at the peak performance. Among other findings, we observe that vector instruction-based clock-gating techniques achieve power savings for all vector FP instructions. Finally, when evaluating all techniques together, using “real-world” benchmarking, the power reductions are up to 80%. Additionally, in accordance with processor design trends, we perform this research in a fully parameterizable and automated fashion.The research leading to these results has received funding from the RoMoL ERC Advanced Grant GA 321253 and is supported in part by the European Union (FEDER funds) under contract TTIN2015-65316-P.
The work of I. Ratkovic was supported by a FPU research grant from the Spanish MECD.Peer ReviewedPostprint (author's final draft
- …