Green Wave : A Semi Custom Hardware Architecture for Reverse Time Migration

Over the course of the last few decades the scientific community greatly benefited from steady advances in compute performance. Until the early 2000's this performance improvement was achieved through rising clock rates. This enabled plug-n-play performance improvements for all codes. In 2005 the stagnation of CPU clock rates drove the computing hardware manufactures to attain future performance through explicit parallelism. Now the HPC community faces a new, even bigger challenge. So far performance gains were achieved through replication of general-purpose cores and nodes. Unfortunately, rising cluster sizes resulted in skyrocketing energy costs - a paradigm change in HPC architecture design is inevitable. In combination with the increasing costs of data movement, the HPC community started exploring alternatives like GPUs and large arrays of simple, low-power cores (e.g. BlueGene) to offer the better performance per Watt and greatest scalability. As in general science, the seismic community faces large-scale, complex computational challenges that can only be limited solved with available compute capabilities. Such challenges include the physically correct modeling of subsurface rock layers. This thesis analyzes the requirements and performance of isotropic (ISO), vertical transverse isotropic (VTI) and tilted transverse isotropic (TTI) wave propagation kernels as they appear in the Reverse Time Migration (RTM) imaging method. It finds that even with leading-edge, commercial off-the-shelf hardware, large-scale survey sizes cannot be imaged within reasonable time and power constraints. This thesis uses a novel architecture design method leveraging a hardware/software co-design approach, adopted from the mobile- and embedded market, for HPC. The methodology tailors an architecture design to a class of applications without loss of generality like in full custom designs. This approach was first applied in the Green Flash project, which proved that the co-design approach has the potential for high energy efficiency gains. This thesis presents the novel Green Wave architecture that is derived from the Green Flash project. Rather than focusing on climate codes, like Green Flash, Green Wave chooses RTM wave propagation kernels as its target application. Thus, the goal of the application-driven, co-design Green Wave approach, is to enable full programmability while allowing greater computational efficiency than general-purpose processors or GPUs by offering custom extensions to the processor's ISA and correctly sizing software-managed memories and an efficient on-chip network interconnect. The lowest level building blocks of the Green Wave design are pre-verified IP components. This minimizes the amount of custom logic in the design, which in turn reduces verification costs and design uncertainty. In this thesis three Green Wave architecture designs derived from ISO, VTI and TTI kernel analysis are introduced. Further, a programming model is proposed capable of hiding all communication latencies. With production-strength, cycle-accurate hardware simulators Green Wave's performance is benchmarked and its performance compared to leading on-market systems from Intel, AMD and NVidia. Based on a large-scale example survey, the results show that Green Wave has the potential of an energy efficiency improvement of 5x compared to x86 and 1.4x-4x to GPU-based clusters for ISO, VTI and TTI kernels

Helmholtz Portfolio Theme Large-Scale Data Management and Analysis (LSDMA)

The Helmholtz Association funded the "Large-Scale Data Management and Analysis" portfolio theme from 2012-2016. Four Helmholtz centres, six universities and another research institution in Germany joined to enable data-intensive science by optimising data life cycles in selected scientific communities. In our Data Life cycle Labs, data experts performed joint R&D together with scientific communities. The Data Services Integration Team focused on generic solutions applied by several communities

Software for Exascale Computing - SPPEXA 2016-2019

This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest

Seismic Waves

The importance of seismic wave research lies not only in our ability to understand and predict earthquakes and tsunamis, it also reveals information on the Earth's composition and features in much the same way as it led to the discovery of Mohorovicic's discontinuity. As our theoretical understanding of the physics behind seismic waves has grown, physical and numerical modeling have greatly advanced and now augment applied seismology for better prediction and engineering practices. This has led to some novel applications such as using artificially-induced shocks for exploration of the Earth's subsurface and seismic stimulation for increasing the productivity of oil wells. This book demonstrates the latest techniques and advances in seismic wave analysis from theoretical approach, data acquisition and interpretation, to analyses and numerical simulations, as well as research applications. A review process was conducted in cooperation with sincere support by Drs. Hiroshi Takenaka, Yoshio Murai, Jun Matsushima, and Genti Toyokuni

Belle II Technical Design Report

The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.Comment: Edited by: Z. Dole\v{z}al and S. Un

G-CSC Report 2010

The present report gives a short summary of the research of the Goethe Center for Scientific Computing (G-CSC) of the Goethe University Frankfurt. G-CSC aims at developing and applying methods and tools for modelling and numerical simulation of problems from empirical science and technology. In particular, fast solvers for partial differential equations (i.e. pde) such as robust, parallel, and adaptive multigrid methods and numerical methods for stochastic differential equations are developed. These methods are highly adanvced and allow to solve complex problems.. The G-CSC is organised in departments and interdisciplinary research groups. Departments are localised directly at the G-CSC, while the task of interdisciplinary research groups is to bridge disciplines and to bring scientists form different departments together. Currently, G-CSC consists of the department Simulation and Modelling and the interdisciplinary research group Computational Finance

Advanced Techniques for Ground Penetrating Radar Imaging

Ground penetrating radar (GPR) has become one of the key technologies in subsurface sensing and, in general, in non-destructive testing (NDT), since it is able to detect both metallic and nonmetallic targets. GPR for NDT has been successfully introduced in a wide range of sectors, such as mining and geology, glaciology, civil engineering and civil works, archaeology, and security and defense. In recent decades, improvements in georeferencing and positioning systems have enabled the introduction of synthetic aperture radar (SAR) techniques in GPR systems, yielding GPR–SAR systems capable of providing high-resolution microwave images. In parallel, the radiofrequency front-end of GPR systems has been optimized in terms of compactness (e.g., smaller Tx/Rx antennas) and cost. These advances, combined with improvements in autonomous platforms, such as unmanned terrestrial and aerial vehicles, have fostered new fields of application for GPR, where fast and reliable detection capabilities are demanded. In addition, processing techniques have been improved, taking advantage of the research conducted in related fields like inverse scattering and imaging. As a result, novel and robust algorithms have been developed for clutter reduction, automatic target recognition, and efficient processing of large sets of measurements to enable real-time imaging, among others. This Special Issue provides an overview of the state of the art in GPR imaging, focusing on the latest advances from both hardware and software perspectives