Stability analysis of fuzzy sliding mode controlled switched reluctance motor drives

This paper presents a small deviant dynamic-state model and the system transfer functions for SRM drive system under different control modes with fuzzy sliding mode controller. With the help of the system open-loop and dosed-loop transfer functions, the operation performances of SRM drive system are discussed. From the characteristics of the transfer functions, it is concluded that the FSMC speed regulator can be regarded as an adaptive PI regulator. The proposed scheme is applied to a 4 kW SRM drive and the system performance is verified by computer simulation results.published_or_final_versio

Variable structure control with chattering elimination and guaranteed stability for a generalized T-S model

In this paper, a fuzzy based Variable Structure Control (VSC) with guaranteed stability is presented. The main objective is to obtain an improved performance of highly non-linear unstable systems. The main contribution of this work is that, firstly, new functions for chattering reduction and error convergence without sacrificing invariant properties are proposed, which is considered the main drawback of the VSC control. Secondly, the global stability of the controlled system is guaranteed.The well known weighting parameters approach, is used in this paper to optimize local and global approximation and modeling capability of T-S fuzzy model.A one link robot is chosen as a nonlinear unstable system to evaluate the robustness, effectiveness and remarkable performance of optimization approach and the high accuracy obtained in approximating nonlinear systems in comparison with the original T-S model. Simulation results indicate the potential and generality of the algorithm. The application of the proposed FLC-VSC shows that both alleviation of chattering and robust performance are achieved with the proposed FLC-VSC controller. The effectiveness of the proposed controller is proven in front of disturbances and noise effects

Simple Sliding Mode Controller with Adaptive Fuzzy Saturation Function for Nonlinear Single Input-Single Output System

Sliding mode control algorithm that uses fuzzy saturation function is designed inthis paper for nonlinear system. The fuzzy saturation function is suggested to improvethe accuracy and the robustness of the sliding mode control which are partially lostwhen using a fixed boundary layer. The fuzzy saturation function is simple, in thesense that both the membership functions and the rule base are simple. The overallcontrol algorithm has stability assurance for the closed-loop controlled system;therefore, it may be applied to control different systems, in this paper this algorithm isapplied on nonlinear SISO system with 10%parameter uncertainty and nonlineardisturbance. Simulation results show that the developed algorithm has good controlperformance with negligible chattering

Discrete-Time Exponentially Stabilizing Fuzzy Sliding Mode Control via Lyapunov’s Method

The exponentially stabilizing state feedback control algorithm is developed by Lyapunov’s second method leading to the variable structure system with chattering free sliding modes. Linear time-invariant discrete-time second order plant is considered and the control law is obtained by using a simple fuzzy controller. The analytical structure of the proposed controller is derived and used to prove exponential stability of sliding subspace. Essentially, the control algorithm drives the system from an arbitrary initial state to a prescribed so-called sliding subspace S, in finite time and with prescribed velocity estimate. Inside the sliding subspace S, the system is switched to the sliding mode regime and stays in it forever. The proposed algorithm is tested on the real system in practice, DC servo motor, and simulation and experimental results are given

Real-time Knowledge-based Fuzzy Logic Model for Soft Tissue Deformation

In this research, the improved mass spring model is presented to simulate the human liver deformation. The underlying MSM is redesigned where fuzzy knowledge-based approaches are implemented to determine the stiffness values. Results show that fuzzy approaches are in very good agreement to the benchmark model. The novelty of this research is that for liver deformation in particular, no specific contributions in the literature exist reporting on real-time knowledge-based fuzzy MSM for liver deformation

Design and Implementation of Internal Model Based Controllers for DC/ AC Power Converters

The aim of this thesis is to design and implement an advanced control system for a working three-phase DC to AC power converter. Compared to' the traditional PI controller used widely in industry, the new voltage controller can track the reference voltage with improved accuracy and efficiency in the presence of different kind of local loads, and also works well in the single phase voltage control. This voltage controller is combined with a power controller to yield a complete controller. An important aspect of this work is the hardware implementation of the whole system. Main parts ofthis thesis are: ???????? 1. Review ofH-infinity and repetitive control techniques and their applications in power converters. 2. Design of a new voltage controller to eliminate the DC component in the output voltages, and taking into account the practical issues such as the processing delay due to the digital signal processor (DSP) implementation. 3. Modelling and simulation of the converter system incorporating different control techniques and with different kinds of loads. 4. Hardware implementation and the two-processor controller. The parallel communication between the DSPs. 5. The main problems encountered in???????????????????? hardware implementation and programming. The software used to initialize DSPs, implement the discretetime voltage controller and other functions such ~ generations of space vector pulse width modulation (SVPWM) signals, circuit protections, analog to digital (AD) cOl)versions, data transmission, etc. 6. Experimental results the under circumstances of no load connected to the converter, pure three-phase resistive loads, three-phase unbalanced resistive' loads and the series resistor-inductor loads. /Imperial Users onl

Design of Adaptive Sliding Mode Fuzzy Control for Robot Manipulator Based on Extended Kalman Filter

In this work, a new adaptive motion control scheme for robust performance control of robot manipulators is presented. The proposed scheme is designed by combining the fuzzy logic control with the sliding mode control based on extended Kalman filter. Fuzzy logic controllers have been used successfully in many applications and were shown to be superior to the classical controllers for some nonlinear systems. Sliding mode control is a powerful approach for controlling nonlinear and uncertain systems. It is a robust control method and can be applied in the presence of model uncertainties and parameter disturbances, provided that the bounds of these uncertainties and disturbances are known. We have designed a new adaptive Sliding Mode Fuzzy Control (SMFC) method that requires only position measurements. These measurements and the input torques are used in an extended Kalman filter (EKF) to estimate the inertial parameters of the full nonlinear robot model as well as the joint positions and velocities. These estimates are used by the SMFC to generate the input torques. The combination of the EKF and the SMFC is shown to result in a stable adaptive control scheme called trajectory-tracking adaptive robot with extended Kalman (TAREK) method. The theory behind TAREK method provides clear guidelines on the selection of the design parameters for the controller. The proposed controller is applied to a two-link robot manipulator. Computer simulations show the robust performance of the proposed scheme

Stabilizing control design of a motorcycle

This thesis solves the stabilizing control of an autonomous motorcycle. The control of an autonomous motorcycle is a challenging and interesting problem in the field because the plant is under-actuated, unstable and nonlinear. Two major problems that have not been considered in the literature are explicitly solved in our work: (i) the robust control problem of the plant subject to uncertainty and exogenous disturbance; (ii) the non-local stabilization of the nonlinear plant. To achieve the first goal, we propose a robust H_infty controller based on the linearized system, which provides a significant improvement in dealing model uncertainty and disturbance attenuation in comparison with those controllers given by classical linear design tools. To achieve the second goal, we propose a nonlinear controller based on the combination of a nonlinear forwarding method with several other methods for the nonlinear plant through identifying an appropriate upper triangular structure of the nonlinear system. This yields a stability region, the whole upper space above the level ground, such that the trajectory starting from any position in the upper hemi-sphere with arbitrary initial velocities converges to the upright position. Both results are novel and first results of their kinds in control of an autonomous motorcycle. Computer simulations verify the effectiveness of the proposed controllers