Pembuatan Model Hybrid 2 Teknik Reduksi Peak-to-average Power Ratio Partial Transmit Sequence Dan Clipping Filtering Pada Sistem Mimo-ofdm

Sistem MIMO digunakan dalam sistem komunikasi nirkabel modern untuk memenuhi tuntutan kecepatan transmisi data yang tinggi untuk berbagai aplikasi dan layanan namun sistem MIMO-OFDM mempunyai kelemahan nilai PAPR (Peak to Average Power Ratio) yang tinggi dan membuat HPA (High Power Amplifier) bekerja pada daerah non-linier. Sehingga perlu dilakukan reduksi dengan teknik reduksi PAPR. dalam Penelitian ini dilakukan analisis reduksi PAPR pada sistem MIMO-OFDM menggunakan teknik hybrid Improved Partial Transmits Sequence dan Simplified Clipping Filtering. Analisis dilakukan dengan mengamati kinerja penggunaan teknik reduksi PAPR dan penggunaan tanpa teknik reduksi PAPR. Hasil simulasi menunjukkan pada probabilitas 1x10-5, hasil kinerja tanpa teknik reduksi dibutuhkan level threshold PAPR0 sebesar ± 12 dB, sedangkan ketika menggunakan teknik reduksi hybrid Improved PTS dan Simplified CF dibutuhkan level threshold PAPR0 rata-rata ± 6 dB dan membandingkan kinerja teknik reduksi Hybrid Improved PTS - Simplified CF dengan nilai Clipping ratio 1,4 dan 1,6. Maka kinerja reduksi PAPR terbaik adalah dengan menggunakan teknik reduksi hybrid Improved PTS dan Simplified CF dengan Clipping ratio 1,4 karena mampu menyuguhkan selisih nilai reduksi sebesar ± 5,7 dB daripada tanpa menggunakan teknik reduksi. dan penggunaan nilai Clipping Ratio yang semakin rendah menghasilkan nilai PAPR yang juga semakin rendah, karena Amplitudo maksimum semakin kecil

PAPR Reduction for Improved Efficiency of OFDM Modulation for Next Generation Communication Systems

Highly linear power amplifiers are required for transferring   large amount of data for future communication. Orthogonal frequency division multiplexing (OFDM) provides high data rate transmission capability with robustness to radio channel impairments. It has been widely accepted for future communication for different services. But, it suffers from high value of peak-to-average power ratio (PAPR). High value of PAPR drives high power amplifier into its saturation region and causes it to operate in the nonlinear region.  In this paper, comparative study of four different PAPR reduction techniques: clipping and filtering (CF), selective mapping  method (SLM), partial transmit sequence (PTS) and DFT- spread technique  have been done. Mathematical modeling and Matlab simulations have been performed to arrive at the results with 4 QAM modulation format and 1024 number of sub carriers. At 0.01 % of complementary cumulative distribution function (CCDF) significant reduction of 11.3, 3.5, 3.4 and 1.0 dB have been obtained with DFT- spread, SLM, PTS and CF techniques respectively

Power savings analysis of clipping and filtering method in OFDM systems

The clipping and filtering method is analyzed in terms of power savings. The analysis takes account of the gain in the amplifier efficiency due to peak-to-average-power-ratio (PAPR) reduction. Assuming a linear amplifier and a typical digital signal processor, the power savings is shown to be in the order of Watts

Performance Analysis of OFDM with Peak Cancellation Under EVM and ACLR Restrictions

This paper presents performance analysis of an adaptive peak cancellation method to reduce the high peak-toaverage power ratio (PAPR) for OFDM systems, while keeping the out-of-band (OoB) power leakage as well as an in-band distortion power below the pre-determined level. In this work, the increase of adjacent leakage power ratio (ACLR) and error vector magnitude (EVM) are estimated recursively using the detected peak amplitude. We present analytical framework for OFDM-based systems with theoretical bit error rate (BER) representations and detection of optimum peak threshold based on predefined EVM and ACLR requirements. Moreover, the optimum peak detection threshold is selected based on the oretical design to maintain the predefined distortion level. Thus, their degradations are automatically restricted below the pre-defined levels which correspond to target OoB radiation. We also discuss the practical design of peak-cancellation (PC) signal with target OoB radiation and in-band distortion through optimizing the windowing size of the PC signal. Numerical results show the improvements with respect to both achievable bit error rate (BER) and PAPR with the PC method in eigen-beam space division multiplexing (E-SDM) systems under restriction of OoB power radiation. It can also be seen that the theoretical BER shows good agreements with simulation results

Peak-to-Average Power Ratio Reduction of DOCSIS 3.1 Downstream Signals

Tone reservation (TR) is an attractive and widely used method for peak-to-average power ratio (PAPR) reduction of orthogonal frequency division multiplexing (OFDM) signals, where both transmitter and receiver agree upon a number of subcarriers or tones to be reserved to generate a peak canceling signal that can reduce the peak power of the transmitted signals. The tones are selected to be mutually exclusive with the tones used for data transmission, which allows the receiver to extract the data symbols without distortions. This thesis presents two novel PAPR reduction algorithms for OFDM signals based on the TR principle, which do not distort the transmitted signals. The first proposed algorithm is performed in the time domain, whereas the second algorithm is a new clipping-and-filtering method. Both algorithms consist of two stages. The first stage, which is done off-line, creates a set of canceling signals based on the settings of the OFDM system. In particular, these signals are constructed to cancel signals at different levels of maximum instantaneous power that are above a predefined threshold. The second stage, which is online and iterative, reduces the signal peaks by using the canceling signals constructed in the first stage. The precalculated canceling signals can be updated when different tone sets are selected for data transmission, accommodating many practical applications. Simulation results show that the proposed algorithms achieve slightly better PAPR reduction performance than the conventional algorithms. Moreover, such performance is achieved with much lower computational complexity in terms of numbers of multiplications and additions per iteration. Among the two proposed algorithms, the time-domain algorithm gives the best peak reduction performance but the clipping-and-filtering algorithm requires considerably less number of multiplications per iteration and can be efficiently implemented using the fast Fourier transform (FFT)/inverse fast Fourier transform (IFFT) structure

Performance of PAPR Reduction Techniques for MIMO-OFDM Systems in 4G Wireless Communication

No Abstrac

ON THE PAPR REDUCTION IN OFDM SYSTEMS: A NOVEL ZCT PRECODING BASED SLM TECHNIQUE

High Peak to Average Power Ratio (PAPR) reduction is still an important challenge in Orthogonal Frequency Division Multiplexing (OFDM) systems. In this paper, we propose a novel Zadoff-Chu matrix Transform (ZCT) precoding based Selected Mapping (SLM) technique for PAPR reduction in OFDM systems. This technique is based on precoding the constellation symbols with ZCT precoder after the multiplication of phase rotation factor and before the Inverse Fast Fourier Transform (IFFT) in the SLM based OFDM (SLM-OFDM) Systems. Computer simulation results show that, the proposed technique can reduce PAPR up to 5.2 dB for N=64 (System subcarriers) and V=16 (Dissimilar phase sequences), at clip rate of 10-3. Additionally, ZCT based SLM-OFDM (ZCT-SLM-OFDM) systems also take advantage of frequency variations of the communication channel and can also offer substantial performance gain in fading multipath channels

Peak-to-Average-Power-Ratio (PAPR) Reduction Techniques for Orthogonal-Frequency-Division- Multiplexing (OFDM) Transmission

Wireless communication has experienced an incredible growth in the last decade. Two decades ago,the number of mobile subscribers was less than 1% of the world\u27s population. As of 2011, the number of mobile subscribers has increased tremendously to 79.86% of the world\u27s population. Robust and high-rate data transmission in mobile environments faces severe problems due to the time-variant channel conditions, multipath fading and shadow fading. Fading is the main limitation on wireless communication channels. Frequency selective interference and fading, such as multipath fading, is a bandwidth bottleneck in the last mile which runs from the access point to the user. The last mile problem in wireless communication networks is caused by the environment of free space channels through which the signal propagates. Orthogonal Frequency Division Multiplexing (OFDM) is a promising modulation and multiplexing technique due to its robustness against multipath fading. Nevertheless, OFDM suffers from high Peak-to-Average- Power-Ratio (PAPR), which results in a complex OFDM signal. In this research, reduction of PAPR considering the out-of-band radiation and the regeneration of the time-domain signal peaks caused by filtering has been studied and is presented. Our PAPR reduction was 30% of the Discrete Fourier Transform (DFT) with Interleaved Frequency Division Multiple Access (IFDMA) utilizing Quadrature Phase Shift Keying (QPSK) and varying the roll-off factor. We show that pulse shaping does not affect the PAPR of Localized Frequency Division Multiple Access (LFDMA) as much as it affects the PAPR of IFDMA. Therefore, IFDMA has an important trade-off relationship between excess bandwidth and PAPR performance, since excess bandwidth increases as the roll-off factor increases. In addition, we studied a low complexity clipping scheme, applicable to IFDMA uplink and OFDM downlink systems for PAPR reduction. We show that the performance of the PAPR of the Interleaved-FDMA scheme is better than traditional OFDMA for the uplink transmission system. Our reduction of PAPR is 53% when IFDMA is used instead of OFDMA in the uplink direction. Furthermore, we also examined an important trade-off relationship between clipping distortion and quantization noise when the clipping scheme is used for OFDM downlink systems. Our results show a significant reduction in the PAPR and the out-of-band radiation caused by clipping for OFDM downlink transmission system