High-Performance On-Chip Microwave Photonic Signal Processing Using Linear and Nonlinear Optics

Manipulating and processing radio-frequency (RF) signals using integrated photonic devices has recently emerged as a paradigm-shifting technology for future microwave applications. This emerging technique is referred to as integrated microwave photonics (IMWP) which enables the high-frequency processing and unprecedentedly wideband tunability in compact photonic circuits, with significantly enhanced stability and robustness. However, to find widespread applications, the performance of IMWP devices must meet or exceed the achievable performance of conventional electronic counterparts. The work presented in this thesis investigates high-performance IMWP signal processing from two aspects: the optimized IMWP processing schemes and the photonic integration. Firstly, we explore novel schemes to improve the performance of chip-based microwave photonic subsystems, such as RF delay lines and RF filters which are basic building blocks of RF systems. A phase amplification technique is demonstrated to achieve a Si3N4 chip-based RF time delay with a delay tuning speed at gigahertz level. A new scheme to achieve an all-optimized RF photonic notch filter is demonstrated, producing a record-high RF link performance and complete functionalities. To unlock the potential of RF signal processing, we investigate a new filter concept of pairing linear and nonlinear optics for a high-performance RF photonic filter. To reduce the footprint of the novel IMWP filter, the photonic integration of both the ring resonators and Brillouin-active circuits on the same photonic chip is achieved. To eliminate the use of integrated optical circulators for on-chip SBS, on-chip backward inter-modal stimulated Brillouin scattering is predicted and experimentally demonstrated in a Si-Chalcogenide hybrid integrated photonic platform. The study and demonstrations presented in this thesis make the first viable step towards high-performance IMWP signal processing for real-world RF applications

Photonic RF signal processors

The purpose of this thesis is to explore the emerging possibilities of processing radiofrequency (RF) or microwave signals in optical domain, which will be a key technology to implement next-generation mobile communication systems and future optical networks. Research activities include design and modelling of novel photonic architectures for processing and filtering of RF, microwave and millimeter wave signals of the above mentioned applications. Investigations especially focus on two basic functions and critical requirements in advanced RF systems, namely: • Interference mitigation and high Q tunable filters. • Arbitrary filter transfer function generation. The thesis begins with a review on several state-of-the-art architectures of in-fiber RF signal processing and related key optical technologies. The unique capabilities offered by in-fiber RF signal processors for processing ultra wide-band, high-frequency signals directly in optical domain make them attractive options for applications in optical networks and wide-band microwave signal processing. However, the principal drawbacks which have been demonstrated so far in the in-fiber RF signal processors arc their inflexible or expensive schemes to set tap weights and time delay. Laser coherence effects also limit sampling frequency and introduce additional phase-induced intensity noise

Radar Technology

In this book “Radar Technology”, the chapters are divided into four main topic areas: Topic area 1: “Radar Systems” consists of chapters which treat whole radar systems, environment and target functional chain. Topic area 2: “Radar Applications” shows various applications of radar systems, including meteorological radars, ground penetrating radars and glaciology. Topic area 3: “Radar Functional Chain and Signal Processing” describes several aspects of the radar signal processing. From parameter extraction, target detection over tracking and classification technologies. Topic area 4: “Radar Subsystems and Components” consists of design technology of radar subsystem components like antenna design or waveform design

Turbo Bayesian Compressed Sensing

Compressed sensing (CS) theory specifies a new signal acquisition approach, potentially allowing the acquisition of signals at a much lower data rate than the Nyquist sampling rate. In CS, the signal is not directly acquired but reconstructed from a few measurements. One of the key problems in CS is how to recover the original signal from measurements in the presence of noise. This dissertation addresses signal reconstruction problems in CS. First, a feedback structure and signal recovery algorithm, orthogonal pruning pursuit (OPP), is proposed to exploit the prior knowledge to reconstruct the signal in the noise-free situation. To handle the noise, a noise-aware signal reconstruction algorithm based on Bayesian Compressed Sensing (BCS) is developed. Moreover, a novel Turbo Bayesian Compressed Sensing (TBCS) algorithm is developed for joint signal reconstruction by exploiting both spatial and temporal redundancy. Then, the TBCS algorithm is applied to a UWB positioning system for achieving mm-accuracy with low sampling rate ADCs. Finally, hardware implementation of BCS signal reconstruction on FPGAs and GPUs is investigated. Implementation on GPUs and FPGAs of parallel Cholesky decomposition, which is a key component of BCS, is explored. Simulation results on software and hardware have demonstrated that OPP and TBCS outperform previous approaches, with UWB positioning accuracy improved by 12.8x. The accelerated computation helps enable real-time application of this work

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium