Time-Reversal UWB Wireless Communication-Based Train Control in Tunnel

This paper reports an evaluation of UWB radio technology and Time-Reversal (TR) technique in tunnel environments for train-to-wayside communication. UWB technology has the potential to offer simultaneous ground-totrain communication, train location and obstacle detection in front of the trains. Time-Reversal channel pre-filtering facilitates signal detection and helps reduce interference. Thus, UWB-TR combination provides a challenging, economically sensible, as well as technically effective alternative solution to existing signaling technologies used in urban transport systems. This paper deals with deterministic channel modeling and its characterization in tunnel environment. It reports simulation performance evaluation of UWB-TR combinations in the developed channel model

Electromagnetic Wave Propagation Modeling for Finding Antenna Specifications and Positions in Tunnels of Arbitrary Cross-Section

This chapter is organized as follows : Section II introduces the modal approach for guiding structures. It is based on a full-wave method, namely the Transmission Line Matrix (TLM) method. These methods has been hampered by their large computational time when compared to asymptotic methods when large size environments are considered. Thus, a suitable 2.5 D TLM implementation to reduce the computational time and to include lossy dielectric walls of tunnels is briefly presented [2]. The computation cost is reduced compared to typical solutions by using the concept of Surface Impedance Boundary Condition (SIBC). Section III is devoted to the description of a methodology for the determination of antenna field specifications and positioning in operational scenarios at high frequencies. Section IV presents the validation of this methodology for a simple canonical case. Lastly, section V describes the analysis and results for a real scenario representative of tunnel environments. Finally, discussions and conclusions are developed

Propagation, Localization and Navigation in Tunnel-like Environments

La robótica de servicio, entendida como aquella destinada al uso de uno o varios robots con fines de, por ejemplo, vigilancia, rescate e inspecciones, ha ido tomando cada vez más relevancia en los últimos años. Debido a los grandes avances en las distintas áreas de la robótica, los robots han sido capaces de ejecutar satisfactoriamente tareas que resultan peligrosas o incluso imposibles para los humanos, en diversos entornos. Entre ellos, los entornos confinados como túneles, minas y tuberías, han atraído la atención en aplicaciones relacionadas con transporte ferroviario, redes vehiculares, búsqueda y rescate, y vigilancia, tanto en el ámbito civil como militar. En muchas tareas, la utilización de varios robots resulta más provechoso que utilizar sólo uno. Para cooperar, los robots deben intercambiar información sobre el entorno y su propio estado, por lo que la comunicación entre ellos resulta crucial. Debido a la imposibilidad de utilizar redes cableadas entre robots móviles, se despliegan redes inalámbricas. Para determinar la calidad de señal entre dos robots, inicialmente se utilizaban modelos de propagación basados únicamente en la distancia entre ellos. Sin embargo, estas predicciones sólo resultan útiles en exteriores y sin la presencia de obstáculos, que sólo componen una pequeña parte de los escenarios de la robótica de servicio. Mas aún, la naturaleza altamente multi-trayecto de la propagación electromagnética en túneles hace que éstos actúen como guías de onda para cierto rango de frecuencias, extendiendo considerablemente el alcance de comunicación en comparación con entornos exteriores. Sin embargo, la señal se ve afectada con profundos desvanecimientos (llamados fadings en inglés). Esto los convierte en un reto para la robótica que considera la comunicación entre robots como fundamental. Además, la naturaleza hostil de estos entornos, así como también la falta de características visuales y estructurales, dificultan la localización en estos escenarios, cuestión que resulta fundamental para ejecutar con éxito una tarea con un robot. Los métodos de localización utilizados en interiores, como aquellos basados en SLAM visual, resultan imprecisos por la falta de características distintivas para cámaras o lásers, mientras que los sensores utilizados en exteriores, como el GPS, no funcionan dentro de túneles o tuberías. En esta tesis abordamos problemas fundamentales para la robótica con el fin de proporcionar herramientas necesarias para la exploración con robots en entornos tipo túnel, manteniendo la conectividad de la red de comunicaciones formada por varios robots y una estación base. Para ello, primeramente caracterizamos, en términos de propagación, los dos escenarios tipo túnel más comunes: un túnel de hormigón y una tubería metálica. Hacemos énfasis en el fenómeno de los fadings, ya que son el problema más importante a considerar para mantener la comunicación. Posteriormente presentamos una estrategia de navegación para desplegar un equipo de robots en un túnel, lidiando con los fadings para mantener la conectividad de la red formada por los robots. Esta estrategia ha sido validada a través de numerosos experimentos realizados en un túnel real, el túnel de Somport. Luego, abordamos el problema de la localización, proponiendo e implementando una técnica que permite estimar la posición de un robot dentro de una tubería, basada en la periodicidad de los fadings. El método es validado a través de experimentos reales en tuberías de pequeña y grandes dimensiones. Finalmente, proponemos esquemas de diversidad espacial, de forma que se facilita la navegación mientras se mejora la localización.Deploying a team of robots for search and rescue, inspection, or surveillance, has increasingly gained attention in the last years. As a result of the advances in several areas of robotics, robots have been able to successfully execute tasks that are hazardous or even impossible for humans in a variety of scenarios, such as outdoors, indoors, or even underground. Among these scenarios, tunnel-like environments (such as tunnels, mines, or pipes) have attracted attention for train applications, vehicular networks, search and rescue, and even service and surveillance missions in both military and civilian contexts. In most of the tasks, utilizing a multi-robot team yields better results than a singlerobot system, as it makes the system more robust while reducing the time required to complete tasks. In order to cooperate, robots must exchange information about their current state and the surrounding environment, making communication between them a crucial task. However, due to the mobile nature of robots used for exploration, a wired architecture is not possible nor convenient. Instead, a wireless network is often deployed. Wireless propagation in tunnel-like environments, characterized for the presence of strong fading phenomena, differs from regular indoor and outdoor scenarios, posing multiple challenges for communication-aware robotics. In addition, accurate localization is a problem in environments such as tunnels or pipes. These environments generally lack distinctive visual and/or structural features and are longer than they are wide in shape. Standard indoor localization techniques do not perform well in pipelines or tunnels given the lack of exploitable features, while outdoor techniques (GPS in particular) do not work in these scenarios. In this thesis, we address basic robotics-related problems in order to provide some tools necessary for robotics exploration in tunnel-like scenarios under connectivity constraints. In the first part, we characterize, in terms of propagation, two of the most common tunnel-like environments: a pipe and a tunnel. We emphasize the spatial-fadings phenomena, as it is one of the most relevant issues to deal with, in a communications context. Secondly, we present a navigation strategy to deploy a team of robots for tunnel exploration, in particular maintaining network connectivity in the presence of these fadings. Several experiments conducted in a tunnel allow us to validate the connectivity maintenance of the system. Next, we address the localization problem and propose a technique that uses the periodicity of the fadings to estimate the position of the robots from the base station. The method is validated in small-scale and large-scale pipes. Finally, we propose spatial diversity schemes in order to ease the navigation while improving the localization

Investigation of MIMO Channel Characteristics in a Two-Section Tunnel at 1.4725 GHz

This paper presents results from a wide band single-input–single-output (SISO) and 16 × 16 virtual multiple-input–multiple-output (MIMO) measurement campaign at a center frequency of 1.4725 GHz in a 100-meter long tunnel laboratory which is terminated by a vertical wall with a metallic door. The path loss, root-mean-square delay spread (RMS-DS) characteristics, and power delay profiles (PDPs) are described. In addition, we provide results for the MIMO channel amplitude matrix, which offers a new perspective in understanding MIMO characteristics in tunnel scenarios. Our measurement results are analyzed and compared to ray tracing simulations. The relationships among the angle spread, channel matrix singular values, and MIMO capacity at various link distances are illustrated, and these provide insights into MIMO system deployment

Time-Domain Electromagnetic Wave Propagation in Confined Environments

International audienceConfined environments like tunnels are electrically large structures for guided wave propagation. They can have arbitrary cross sections, and the design and optimization of antenna for communication system requires the knowledge of a "full-wave" solution in nearby zones. Current models based on asymptotic approaches do not describe adequately the wave propagation under the above conditions. In addition, a complete "full-wave" analysis of the tunnel propagation performances is not feasible in terms of computer expenditure. After a survey of the most commonly used techniques for propagation in tunnels, some investigation regarding an appropriate approach to find the fields is proposed. It is based on a modal decomposition of the wave propagation that allows an optimization of the coupling with the antenna. To find the mode characteristic for arbitrary cross section, a full-wave method, namely, the transmission-line matrix (TLM), is modified to a so-called 2.5-dimensional TLM algorithm and presented in details. This approach is validated for a canonical structure. Then, it is applied to study the wave propagation in a realistic rectangular tunnel. The concept of surface impedance boundary condition (SIBC) is introduced to reduce the TLM computational domain and model the tunnel walls that can be considered as lossy dielectric. Results show that guided structures with lossy dielectric walls of arbitrary cross section can be studied with this approach

Accurate and Efficient Calculation of Three-Dimensional Cost Distance

Cost distance is one of the fundamental functions in geographical information systems (GISs). 3D cost distance function makes the analysis of movement in 3D frictions possible. In this paper, we propose an algorithm and efficient data structures to accurately calculate the cost distance in discrete 3D space. Specifically, Dijkstra’s algorithm is used to calculate the least cost between initial voxels and all the other voxels in 3D space. During the calculation, unnecessary bends along the travel path are constantly corrected to retain the accurate least cost. Our results show that the proposed algorithm can generate true Euclidean distance in homogeneous frictions and can provide more accurate least cost in heterogeneous frictions than that provided by several existing methods. Furthermore, the proposed data structures, i.e., a heap combined with a hash table, significantly improve the algorithm’s efficiency. The algorithm and data structures have been verified via several applications including planning the shortest drone delivery path in an urban environment, generating volumetric viewshed, and calculating the minimum hydraulic resistance

Ground robotics in tunnels: Keys and lessons learned after 10 years of research and experiments

The work reported in this article describes the research advances and the lessons learned by the Robotics, Perception and Real-Time group over a decade of research in the field of ground robotics in confined environments. This study has primarily focused on localization, navigation, and communications in tunnel-like environments. As will be discussed, this type of environment presents several special characteristics that often make well-established techniques fail. The aim is to share, in an open way, the experience, errors, and successes of this group with the robotics community so that those that work in such environments can avoid (some of) the errors made. At the very least, these findings can be readily taken into account when designing a solution, without needing to sift through the technical details found in the papers cited within this text

Doctor of Philosophy

dissertationWireless communication has become an essential part of everyday life. The hunger for more data, more phone calls, more video, and more access in more places, including vehicles, is growing massively. Communication in vehicles is particularly challenging because of their extremely high multipath environment. In addition, there is significant interest in reducing the number of wires in vehicles to reduce weight, complexity, maintenance, etc. and replace them with wireless systems. Preliminary research shows that MIMO systems take advantage of the extreme multipath environment found in aircraft and other vehicles and also provides more consistent channel capacity than SISO systems. The purpose of this research was to quantify complex channels (including the aircraft/vehicle environment) and their relation to other environments, evaluate MIMO in aircraft, provide design constraints for accurately modeling complex channels, and provide information to predict optimum antenna type and location to enable communication in aircraft/cars/buses/ships/trains/etc. and other extreme channels. The ability to evaluate and design MIMO technologies from the guidelines in this paper is potentially transformative for aircraft safety - enabling a new generation of location specific monitoring and maintenance. Average measured capacity was found to be between 18 and 21 bits/s/Hz using a 4x4 array of antennas, and had no direct relation to the size of the channel. Site-specific capacity showed a multipath rich channel, varying between 15 to 23 bits/s/Hz. The capacity decreased for increasing measurement distance, with exceptions near reflective objects that increase multipath. Due to these special circumstances for site-specific locations within complex channels, it is recommended that 3D ray tracing be used for modeling as it is more accurate than commonly used statistical models, within 1.1 bits/s/Hz. This showed that our 3D ray tracing is adaptable to various environments and gives a more accurate depiction than statistical models that average channel variations. This comes at the cost of greater model complexity. If increased complexity is not desirable, Nakagami 1.4 could be used as the next most accurate model. Design requirements for modeling different complex channels involve a detailed depiction of channel geometry, including height, width, length, shape (square, cylindrical, slanted walls, etc.), large windows, and reflective objects inside the channel space, especially those near the transmitter. Overall, the multipath rich channel found in vehicles is an excellent environment for MIMO systems. These complex channels can be simulated accurately without measurement and before they are even built using our sitespecific 3D ray tracing software combined with a detailed signal model to incorporate antenna effects

Measurement Based Channel Characterization and Modeling for Vehicle-to-Vehicle Communications

Vehicle-to-Vehicle (V2V) communication is a challenging but fast growing technology that has potential to enhance traffic safety and efficiency. It can also provide environmental benefits in terms of reduced fuel consumption. The effectiveness and reliability of these applications highly depends on the quality of the V2V communication link, which rely upon the properties of the propagation channel. Therefore, understanding the properties of the propagation channel becomes extremely important. This thesis aims to fill some gaps of knowledge in V2V channel research by addressing four different topics. The first topic is channel characterization of some important safety critical scenarios (papers I and II). Second, is the accuracy or validation study of existing channel models for these safety critical scenarios (papers III and IV). Third, is about channel modeling (paper V) and, the fourth topic is the impact of antenna placement on vehicles and the possible diversity gains. This thesis consists of an introduction and six papers: Paper I presents a double directional analysis of vehicular channels based on channel measurement data. Using SAGE, a high-resolution algorithm for parameter estimation, we estimate channel parameters to identify underlying propagation mechanisms. It is found that, single-bounce reflections from static objects are dominating propagation mechanisms in the absence of line-of-sight (LOS). Directional spread is observed to be high, which encourages the use of diversity-based methods. Paper II presents results for V2V channel characterization based on channel measurements conducted for merging lanes on highway, and four-way street intersection scenarios. It is found that the merging lane scenario has the worst propagation condition due to lack of scatterers. Signal reception is possible only with the present LOS component given that the antenna has a good gain in the direction of LOS. Thus designing an antenna that has an omni-directional gain, or using multiple antennas that radiate towards different directions become more important for such safety critical scenarios. Paper III presents the results of an accuracy study of a deterministic ray tracing channel model for vehicle-to-vehicle (V2V) communication, that is compared against channel measurement data. It is found that the results from measurement and simulation show a good agreement especially in LOS situations where as in NLOS situations the simulations are accurate as far as existing physical phenomena of wave propagation are captured by the implemented algorithm. Paper IV presents the results of a validation study of a stochastic NLOS pathloss and fading model named VirtualSource11p for V2V communication in urban street intersections. The reference model is validated with the help of independent channel measurement data. It is found that the model is flexible and fits well to most of the measurements with a few exceptions, and we propose minor modifications to the model for increased accuracy. Paper V presents a shadow fading model targeting system simulations based on channel measurements. The model parameters are extracted from measurement data, which is separated into three categories; line-of-sight (LOS), LOS obstructed by vehicles (OLOS), and LOS blocked by buildings (NLOS), with the help of video information recorded during the measurements. It is found that vehicles obstructing the LOS induce an additional attenuation in the received signal power. The results from system level vehicular ad hoc network (VANET) simulations are also presented, showing that the LOS obstruction affects the packet reception probability and this can not be ignored. Paper VI investigates the impact of antenna placement based on channel measurements performed with four omni-directional antennas mounted on the roof, bumper, windscreen and left-side mirror of the transmitter and receiver cars. We use diversity combining methods to evaluate the performance differences for all possible single-input single-output (SIMO), multiple-input single-output (MISO) and multiple-input multiple-output (MIMO) link combinations. This investigation suggests that a pair of antennas with complementary properties, e.g., a roof mounted antenna together with a bumper antenna is a good solution for obtaining the best reception performance, in most of the propagation environments. In summary, this thesis describes the channel behavior for safety-critical scenarios by statistical means and models it so that the system performance can be assessed in a realistic manner. In addition to that the influence of different antenna arrangements has also been studied to exploit the spatial diversity and to mitigate the shadowing effects. The presented work can thus enable more efficient design of future V2V communication systems