Automotive Battery Equalizers Based on Joint Switched-Capacitor and Buck-Boost Converters

A series of integrated equalizers based on joint buck-boost (BB) and switched-capacitor (SC) converters are proposed for balancing the voltages of series-connected battery packs. All these equalizers realize the any-cells-to-any-cells (AC2AC) equalization mode without increasing the count of MOSFETs and drivers. Corresponding operational principles are analyzed and the expressions of balancing currents are derived by analytical methods and verified by experimental waveforms. According to the comparative balancing experiments for four and six series-connected Li-ion cells, one proposed CBB-PCSC equalizer, which achieves the dual AC2AC balancing modes through the integration of both coupled buck-boost (CBB) and parallel-connected switched-capacitor (PCSC) converters, leads to the highest balancing speed and efficiency. Moreover, compared with several conventional equalizers, this CBB-PCSC topology also has the compact size and low cost, making it become a well-performing integrated topology for automotive battery voltages equalization

Improvement of Li-ion Battery Active Balancer Using PI-Controller

This paper presents simulation and design for the improvement of Li-ion battery ac-tive balancer using PI controller. The growing market for lithium ion (Li-ion) battery cells has made a positive impact towards electrical energy storage (EES) system throughout the advancing technological and scientific world. Balancing in a battery pack has become a main priority to avoid over-charging and over-discharging while also improving the Li-ion battery life. Unlike passive balancing, active balancing transfers the energy from one cell to another or controls the cell’s output, thus im-proving its efficiency. This paper presents how previous work was accomplished by many scholars in order to avail themselves of the active balancing project. A cell model was shown in this paper that was built based on energy transfer circuit theo-ries. A capacitor(C), inductor (L), MOSFET (M) and Diode (D) were used in the circuit build in order to balance the cells of different State-of-Charge (SOC). A PI controller was added with circuit to improve the voltage efficiency. After adding PI controller, the voltage balance of the cell was seen improved

Power Quality Enhancement in Electricity Grids with Wind Energy Using Multicell Converters and Energy Storage

In recent years, the wind power industry is experiencing a rapid growth and more wind farms with larger size wind turbines are being connected to the power system. While this contributes to the overall security of electricity supply, large-scale deployment of wind energy into the grid also presents many technical challenges. Most of these challenges are one way or another, related to the variability and intermittent nature of wind and affect the power quality of the distribution grid. Power quality relates to factors that cause variations in the voltage level and frequency as well as distortion in the voltage and current waveforms due to wind variability which produces both harmonics and inter-harmonics. The main motivation behind work is to propose a new topology of the static AC/DC/AC multicell converter to improve the power quality in grid-connected wind energy conversion systems. Serial switching cells have the ability to achieve a high power with lower-size components and improve the voltage waveforms at the input and output of the converter by increasing the number of cells. Furthermore, a battery energy storage system is included and a power management strategy is designed to ensure the continuity of power supply and consequently the autonomy of the proposed system. The simulation results are presented for a 149.2 kW wind turbine induction generator system and the results obtained demonstrate the reduced harmonics, improved transient response, and reference tracking of the voltage output of the wind energy conversion system.Peer reviewedFinal Accepted Versio

A review on power electronic converters for modular BMS with active balancing

Electric vehicles (EVs) are becoming increasingly popular due to their low emissions, energy efficiency, and reduced reliance on fossil fuels. One of the most critical components in an EV is the energy storage and management system, which requires compactness, lightweight, high efficiency, and superior build quality. Active cell equalization circuits such as those used in battery management systems (BMS) have been developed to balance the voltage and state of charge (SoC) of individual cells, ensuring the safety and reliability of the energy storage system. The use of these types of equalization circuits offers several benefits including improved battery performance, extended battery life, and enhanced safety, which are essential for the successful adoption of EVs. This paper provides a comprehensive overview of the research works related to active cell equalization circuits. This review highlights the important aspects, advantages and disadvantages, and specifications.This work was supported by FCT—Fundação para a Ciência e Tecnologia, within the R&D Units Project Scope UIDB/00319/2020. Luis A. M. Barros is supported by the doctoral scholarship PD/BD/143006/2018, granted by the Portuguese FCT foundation

Study of Novel Power Electronic Converters for Small Scale Wind Energy Conversion Systems

This chapter proposes a study of novel power electronic converters for small scale wind energy conversion systems. In this chapter major topologies of power electronic converters that used in wind energy converter systems have been analysed. Various topologies of DC/AC single stage converters such as high boost Z-source inverters (ZSI) have been investigated. New proposed schemes for inverters such as multilevel and Z-source inverters have been studied in this proposed chapter. Multilevel converters are categorized into three major groups according to their topologies which are diode clamped multilevel converters (DCM), cascade multilevel converters (CMC) with multiple isolated dc voltage sources and flying capacitor based multilevel converters (FCMC). Z-source inverters are divided to ZSI, qZSI and trans-ZSI types. Trans-ZSI is mostly used for high step-up single stage conversions