Reconfigurable rateless codes

We propose novel reconfigurable rateless codes, that are capable of not only varying the block length but also adaptively modify their encoding strategy by incrementally adjusting their degree distribution according to the prevalent channel conditions without the availability of the channel state information at the transmitter. In particular, we characterize a reconfigurable ratelesscode designed for the transmission of 9,500 information bits that achieves a performance, which is approximately 1 dB away from the discrete-input continuous-output memoryless channel’s (DCMC) capacity over a diverse range of channel signal-to-noise (SNR) ratios

Reconfigurable rateless codes

We propose novel reconfigurable rateless codes, that are capable of not only varying the block length but also adaptively modify their encoding strategy by incrementally adjusting their degree distribution according to the prevalent channel conditions without the availability of the channel state information at the transmitter. In particular, we characterize a reconfigurable ratelesscode designed for the transmission of 9,500 information bits that achieves a performance, which is approximately 1 dB away from the discrete-input continuous-output memoryless channel’s (DCMC) capacity over a diverse range of channel signal-to-noise (SNR) ratios

Near-capacity fixed-rate and rateless channel code constructions

Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder

A UEP LT Codes Design with Feedback for Underwater Communication

To satisfy the performance requirement of LT codes with Unequal Erasure Protection (UEP) in underwater environment, the Weighted Expanding Window Fountain (WEWF) code is proposed in this paper. The WEWF codes can achieve strong UEP property by nonuniformly selecting input symbols within each window. To overcome the disadvantages in terms of redundancy in the lower prioritized segments, Correlation Chain Feedback (CCFB) is also introduced to help the transmitter to precisely adjust the encoding scheme. Asymptotic analysis and simulation results demonstrate that the proposed approach can achieve lower symbol error rate and less overall redundancy in the underwater acoustic sensor networks

Towards reliable communication in LTE-A connected heterogeneous machine to machine network

Machine to machine (M2M) communication is an emerging technology that enables heterogeneous devices to communicate with each other without human intervention and thus forming so-called Internet of Things (IoTs). Wireless cellular networks (WCNs) play a significant role in the successful deployment of M2M communication. Specially the ongoing massive deployment of long term evolution advanced (LTE-A) makes it possible to establish machine type communication (MTC) in most urban and remote areas, and by using LTE-A backhaul network, a seamless network communication is being established between MTC-devices and-applications. However, the extensive network coverage does not ensure a successful implementation of M2M communication in the LTE-A, and therefore there are still some challenges. Energy efficient reliable transmission is perhaps the most compelling demand for various M2M applications. Among the factors affecting reliability of M2M communication are the high endto-end delay and high bit error rate. The objective of the thesis is to provide reliable M2M communication in LTE-A network. In this aim, to alleviate the signalling congestion on air interface and efficient data aggregation we consider a cluster based architecture where the MTC devices are grouped into number of clusters and traffics are forwarded through some special nodes called cluster heads (CHs) to the base station (BS) using single or multi-hop transmissions. In many deployment scenarios, some machines are allowed to move and change their location in the deployment area with very low mobility. In practice, the performance of data transmission often degrades with the increase of distance between neighboring CHs. CH needs to be reselected in such cases. However, frequent re-selection of CHs results in counter effect on routing and reconfiguration of resource allocation associated with CH-dependent protocols. In addition, the link quality between a CH-CH and CH-BS are very often affected by various dynamic environmental factors such as heat and humidity, obstacles and RF interferences. Since CH aggregates the traffic from all cluster members, failure of the CH means that the full cluster will fail. Many solutions have been proposed to combat with error prone wireless channel such as automatic repeat request (ARQ) and multipath routing. Though the above mentioned techniques improve the communication reliability but intervene the communication efficiency. In the former scheme, the transmitter retransmits the whole packet even though the part of the packet has been received correctly and in the later one, the receiver may receive the same information from multiple paths; thus both techniques are bandwidth and energy inefficient. In addition, with retransmission, overall end to end delay may exceed the maximum allowable delay budget. Based on the aforementioned observations, we identify CH-to-CH channel is one of the bottlenecks to provide reliable communication in cluster based multihop M2M network and present a full solution to support fountain coded cooperative communications. Our solution covers many aspects from relay selection to cooperative formation to meet the user’s QoS requirements. In the first part of the thesis, we first design a rateless-coded-incremental-relay selection (RCIRS) algorithm based on greedy techniques to guarantee the required data rate with a minimum cost. After that, we develop fountain coded cooperative communication protocols to facilitate the data transmission between two neighbor CHs. In the second part, we propose joint network and fountain coding schemes for reliable communication. Through coupling channel coding and network coding simultaneously in the physical layer, joint network and fountain coding schemes efficiently exploit the redundancy of both codes and effectively combat the detrimental effect of fading conditions in wireless channels. In the proposed scheme, after correctly decoding the information from different sources, a relay node applies network and fountain coding on the received signals and then transmits to the destination in a single transmission. Therefore, the proposed schemes exploit the diversity and coding gain to improve the system performance. In the third part, we focus on the reliable uplink transmission between CHs and BS where CHs transmit to BS directly or with the help of the LTE-A relay nodes (RN). We investigate both type-I and type-II enhanced LTE-A networks and propose a set of joint network and fountain coding schemes to enhance the link robustness. Finally, the proposed solutions are evaluated through extensive numerical simulations and the numerical results are presented to provide a comparison with the related works found in the literature

Network streaming and compression for mixed reality tele-immersion

Bulterman, D.C.A. [Promotor]Cesar, P.S. [Copromotor

Coding for Cooperative Communications

The area of cooperative communications has received tremendous research interest in recent years. This interest is not unwarranted, since cooperative communications promises the ever-so-sought after diversity and multiplexing gains typically associated with multiple-input multiple-output (MIMO) communications, without actually employing multiple antennas. In this dissertation, we consider several cooperative communication channels, and for each one of them, we develop information theoretic coding schemes and derive their corresponding performance limits. We next develop and design practical coding strategies which perform very close to the information theoretic limits. The cooperative communication channels we consider are: (a) The Gaussian relay channel, (b) the quasi-static fading relay channel, (c) cooperative multiple-access channel (MAC), and (d) the cognitive radio channel (CRC). For the Gaussian relay channel, we propose a compress-forward (CF) coding strategy based on Wyner-Ziv coding, and derive the achievable rates specifically with BPSK modulation. The CF strategy is implemented with low-density parity-check (LDPC) and irregular repeataccumulate codes and is found to operate within 0.34 dB of the theoretical limit. For the quasi-static fading relay channel, we assume that no channel state information (CSI) is available at the transmitters and propose a rateless coded protocol which uses rateless coded versions of the CF and the decode-forward (DF) strategy. We implement the protocol with carefully designed Raptor codes and show that the implementation suffers a loss of less than 10 percent from the information theoretical limit. For the MAC, we assume quasi-static fading, and consider cooperation in the low-power regime with the assumption that no CSI is available at the transmitters. We develop cooperation methods based on multiplexed coding in conjunction with rateless codes and find the achievable rates and in particular the minimum energy per bit to achieve a certain outage probability. We then develop practical coding methods using Raptor codes, which performs within 1.1 dB of the performance limit. Finally, we consider a CRC and develop a practical multi-level dirty-paper coding strategy using LDPC codes for channel coding and trellis-coded quantization for source coding. The designed scheme is found to operate within 0.78 dB of the theoretical limit. By developing practical coding strategies for several cooperative communication channels which exhibit performance close to the information theoretic limits, we show that cooperative communications not only provide great benefits in theory, but can possibly promise the same benefits when put into practice. Thus, our work can be considered a useful and necessary step towards the commercial realization of cooperative communications

Energy-aware network coding circuit and system design

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 73-78).Network Coding (NC) has been shown to provide several advantages in communication networks in terms of throughput, data robustness and security. However, its applicability to networks with resource constrained nodes, like Body Area Networks (BANs), has been questioned due to its complexity requirements. Proposed NC implementations are based on high-end CPUs and GPUs, consuming hundreds of Watts, without providing enough insight about its energy requirements. As more and more mobile devices, sensors and other low power systems are used in modern communication protocols, a highly efficient and optimized implementation of NC is required. In this work, an effort is made to bridge NC theory with ultra low power applications. For this reason, an energy-scalable, low power accelerator is designed in order to explore the minimum energy requirements of NC. Based on post-layout simulation results using a TSMC 65nm process, the proposed encoder consumes 22.15 uW at 0.4V, achieving a processing throughput of 80 MB/s. These numbers reveal that NC can indeed be incorporated into resource constrained networks with battery-operated or even energy scavenging nodes. Apart from the hardware design, a new partial packet recovery mechanism based on NC, called PPRNC, is proposed. PPRNC exploits information contained in partial packets, similarly to existing Hybrid-ARQ schemes, but with a PHY-agnostic approach. Minimization of the number of retransmitted packets saves transmission energy and results in higher total network throughput, making PPRNC an attractive candidate for energy constrained networks, such as BANs, as well as modern, high-speed wireless mesh networks. The proposed mechanism is analyzed and implemented using commercial development boards, validating its ability to extract information contained from partial packets.by Georgios Angelopoulos.S.M

Improving the performance and efficiency of wireless networks using rate adaptation

Recent years have seen a staggering increase in the deployment and utilization of wireless networks. More and more devices are being equipped with Wireless LAN (WLAN) cards to take advantage of the omnipresence of WLAN networks. Therefore, it has become necessary that the protocols used by WLANs are efficient and provide good performance. Rate Adaptation protocols are an important mechanism employed by WLANs to improve network performance. This dissertation develops three complementary techniques, which use rate adaptation to optimize and improve performance by i) performing rate adaptation to optimize energy consumption, ii) developing a more accurate technique to predict the frame delivery ratio that is used by rate adaptation protocols, and iii) jointly optimizing rate adaptation with data retransmission to maximize throughput. More specifically, in i), we use extensive measurements to develop a simple yet accurate energy consumption model for 802.11n wireless cards. We use the model to drive the design of an energy aware rate adaptation scheme. A major benefit of a model-based rate adaptation is that applying a model allows us to eliminate frequent probes required in many existing rate adaptation schemes. In ii), we find that the accuracy of existing delivery ratio calculation techniques is still limited due to bursty errors inherent to the wireless channel. We develop a new method for computing packet delivery rate that captures the burstiness of errors. Furthermore, we propose a new data interleaving technique, which leverages our framework to reduce the burstiness of errors, thereby improving frame delivery ratio. Finally, in iii), we address the susceptibility of wireless networks to transmission failures due to dynamic channel conditions and unpredictable interference. To efficiently recover from failures, we propose a retransmission scheme where the receiver combines information received from multiple failed transmissions associated with the same frame. The protocol has two distinguishing features. First, it simultaneously supports partial retransmission and combines bits with low confidence. Second, it jointly optimizes the data rate of the retransmission and the information to be retransmitted to maximize throughput.Electrical and Computer Engineerin

Taming and Leveraging Directionality and Blockage in Millimeter Wave Communications

To cope with the challenge for high-rate data transmission, Millimeter Wave(mmWave) is one potential solution. The short wavelength unlatched the era of directional mobile communication. The semi-optical communication requires revolutionary thinking. To assist the research and evaluate various algorithms, we build a motion-sensitive mmWave testbed with two degrees of freedom for environmental sensing and general wireless communication.The first part of this thesis contains two approaches to maintain the connection in mmWave mobile communication. The first one seeks to solve the beam tracking problem using motion sensor within the mobile device. A tracking algorithm is given and integrated into the tracking protocol. Detailed experiments and numerical simulations compared several compensation schemes with optical benchmark and demonstrated the efficiency of overhead reduction. The second strategy attempts to mitigate intermittent connections during roaming is multi-connectivity. Taking advantage of properties of rateless erasure code, a fountain code type multi-connectivity mechanism is proposed to increase the link reliability with simplified backhaul mechanism. The simulation demonstrates the efficiency and robustness of our system design with a multi-link channel record.The second topic in this thesis explores various techniques in blockage mitigation. A fast hear-beat like channel with heavy blockage loss is identified in the mmWave Unmanned Aerial Vehicle (UAV) communication experiment due to the propeller blockage. These blockage patterns are detected through Holm\u27s procedure as a problem of multi-time series edge detection. To reduce the blockage effect, an adaptive modulation and coding scheme is designed. The simulation results show that it could greatly improve the throughput given appropriately predicted patterns. The last but not the least, the blockage of directional communication also appears as a blessing because the geometrical information and blockage event of ancillary signal paths can be utilized to predict the blockage timing for the current transmission path. A geometrical model and prediction algorithm are derived to resolve the blockage time and initiate active handovers. An experiment provides solid proof of multi-paths properties and the numeral simulation demonstrates the efficiency of the proposed algorithm