5,444 research outputs found
Non-iterative RGB-D-inertial Odometry
This paper presents a non-iterative solution to RGB-D-inertial odometry
system. Traditional odometry methods resort to iterative algorithms which are
usually computationally expensive or require well-designed initialization. To
overcome this problem, this paper proposes to combine a non-iterative front-end
(odometry) with an iterative back-end (loop closure) for the RGB-D-inertial
SLAM system. The main contribution lies in the novel non-iterative front-end,
which leverages on inertial fusion and kernel cross-correlators (KCC) to match
point clouds in frequency domain. Dominated by the fast Fourier transform
(FFT), our method is only of complexity , where is
the number of points. Map fusion is conducted by element-wise operations, so
that both time and space complexity are further reduced. Extensive experiments
show that, due to the lightweight of the proposed front-end, the framework is
able to run at a much faster speed yet still with comparable accuracy with the
state-of-the-arts
Evaluating indoor positioning systems in a shopping mall : the lessons learned from the IPIN 2018 competition
The Indoor Positioning and Indoor Navigation (IPIN) conference holds an annual competition in which indoor localization systems from different research groups worldwide are evaluated empirically. The objective of this competition is to establish a systematic evaluation methodology with rigorous metrics both for real-time (on-site) and post-processing (off-site) situations, in a realistic environment unfamiliar to the prototype developers. For the IPIN 2018 conference, this competition was held on September 22nd, 2018, in Atlantis, a large shopping mall in Nantes (France). Four competition tracks (two on-site and two off-site) were designed. They consisted of several 1 km routes traversing several floors of the mall. Along these paths, 180 points were topographically surveyed with a 10 cm accuracy, to serve as ground truth landmarks, combining theodolite measurements, differential global navigation satellite system (GNSS) and 3D scanner systems. 34 teams effectively competed. The accuracy score corresponds to the third quartile (75th percentile) of an error metric that combines the horizontal positioning error and the floor detection. The best results for the on-site tracks showed an accuracy score of 11.70 m (Track 1) and 5.50 m (Track 2), while the best results for the off-site tracks showed an accuracy score of 0.90 m (Track 3) and 1.30 m (Track 4). These results showed that it is possible to obtain high accuracy indoor positioning solutions in large, realistic environments using wearable light-weight sensors without deploying any beacon. This paper describes the organization work of the tracks, analyzes the methodology used to quantify the results, reviews the lessons learned from the competition and discusses its future
Survey of Motion Tracking Methods Based on Inertial Sensors: A Focus on Upper Limb Human Motion
Motion tracking based on commercial inertial measurements units (IMUs) has been widely studied in the latter years as it is a cost-effective enabling technology for those applications in which motion tracking based on optical technologies is unsuitable. This measurement method has a high impact in human performance assessment and human-robot interaction. IMU motion tracking systems are indeed self-contained and wearable, allowing for long-lasting tracking of the user motion in situated environments. After a survey on IMU-based human tracking, five techniques for motion reconstruction were selected and compared to reconstruct a human arm motion. IMU based estimation was matched against motion tracking based on the Vicon marker-based motion tracking system considered as ground truth. Results show that all but one of the selected models perform similarly (about 35 mm average position estimation error)
Past, Present, and Future of Simultaneous Localization And Mapping: Towards the Robust-Perception Age
Simultaneous Localization and Mapping (SLAM)consists in the concurrent
construction of a model of the environment (the map), and the estimation of the
state of the robot moving within it. The SLAM community has made astonishing
progress over the last 30 years, enabling large-scale real-world applications,
and witnessing a steady transition of this technology to industry. We survey
the current state of SLAM. We start by presenting what is now the de-facto
standard formulation for SLAM. We then review related work, covering a broad
set of topics including robustness and scalability in long-term mapping, metric
and semantic representations for mapping, theoretical performance guarantees,
active SLAM and exploration, and other new frontiers. This paper simultaneously
serves as a position paper and tutorial to those who are users of SLAM. By
looking at the published research with a critical eye, we delineate open
challenges and new research issues, that still deserve careful scientific
investigation. The paper also contains the authors' take on two questions that
often animate discussions during robotics conferences: Do robots need SLAM? and
Is SLAM solved
Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information
Relative positioning between multiple mobile users is essential for many
applications, such as search and rescue in disaster areas or human social
interaction. Inertial-measurement unit (IMU) is promising to determine the
change of position over short periods of time, but it is very sensitive to
error accumulation over long term run. By equipping the mobile users with
ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate
relative positioning by trilateration-based approaches. As compared to vision
or laser-based sensors, the UWB does not need to be with in line-of-sight and
provides accurate distance estimation. However, UWB does not provide any
bearing information and the communication range is limited, thus UWB alone
cannot determine the user location without any ambiguity. In this paper, we
propose an approach to combine IMU inertial and UWB ranging measurement for
relative positioning between multiple mobile users without the knowledge of the
infrastructure. We incorporate the UWB and the IMU measurement into a
probabilistic-based framework, which allows to cooperatively position a group
of mobile users and recover from positioning failures. We have conducted
extensive experiments to demonstrate the benefits of incorporating IMU inertial
and UWB ranging measurements.Comment: accepted by ICRA 201
UAV/UGV Autonomous Cooperation: UAV Assists UGV to Climb a Cliff by Attaching a Tether
This paper proposes a novel cooperative system for an Unmanned Aerial Vehicle
(UAV) and an Unmanned Ground Vehicle (UGV) which utilizes the UAV not only as a
flying sensor but also as a tether attachment device. Two robots are connected
with a tether, allowing the UAV to anchor the tether to a structure located at
the top of a steep terrain, impossible to reach for UGVs. Thus, enhancing the
poor traversability of the UGV by not only providing a wider range of scanning
and mapping from the air, but also by allowing the UGV to climb steep terrains
with the winding of the tether. In addition, we present an autonomous framework
for the collaborative navigation and tether attachment in an unknown
environment. The UAV employs visual inertial navigation with 3D voxel mapping
and obstacle avoidance planning. The UGV makes use of the voxel map and
generates an elevation map to execute path planning based on a traversability
analysis. Furthermore, we compared the pros and cons of possible methods for
the tether anchoring from multiple points of view. To increase the probability
of successful anchoring, we evaluated the anchoring strategy with an
experiment. Finally, the feasibility and capability of our proposed system were
demonstrated by an autonomous mission experiment in the field with an obstacle
and a cliff.Comment: 7 pages, 8 figures, accepted to 2019 International Conference on
Robotics & Automation. Video: https://youtu.be/UzTT8Ckjz1
Inertial Sensors for Human Motion Analysis: A Comprehensive Review
Inertial motion analysis is having a growing interest during the last decades
due to its advantages over classical optical systems. The technological
solution based on inertial measurement units allows the measurement of
movements in daily living environments, such as in everyday life, which is key
for a realistic assessment and understanding of movements. This is why research
in this field is still developing and different approaches are proposed. This
presents a systematic review of the different proposals for inertial motion
analysis found in the literature. The search strategy has been carried out on
eight different platforms, including journal articles and conference
proceedings, which are written in English and published until August 2022. The
results are analyzed in terms of the publishers, the sensors used, the
applications, the monitored units, the algorithms of use, the participants of
the studies, and the validation systems employed. In addition, we delve deeply
into the machine learning techniques proposed in recent years and in the
approaches to reduce the estimation error. In this way, we show an overview of
the research carried out in this field, going into more detail in recent years,
and providing some research directions for future wor
- âŠ