Simulation Analysis of Medium Access Techniques

This paper presents comparison of Access Techniques used in Medium Access Control (MAC) protocol for Wireless Body Area Networks (WBANs). Comparison is performed between Time Division Multiple Access (TDMA), Frequency Division Multiple Access (FDMA), Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA), Pure ALOHA and Slotted ALOHA (S-ALOHA). Performance metrics used for comparison are throughput (T), delay (D) and offered load (G). The main goal for comparison is to show which technique gives highest Throughput and lowest Delay with increase in Load. Energy efficiency is major issue in WBAN that is why there is need to know which technique performs best for energy conservation and also gives minimum delay.Comment: NGWMN with 7th IEEE International Conference on Broadband and Wireless Computing, Com- munication and Applications (BWCCA 2012), Victoria, Canada, 201

TRW-MAC: A thermal-aware receiver-driven wake-up radio enabled duty cycle MAC protocol for multi-hop implantable wireless body area networks in Internet of Things

Implantable Wireless Body Area Network (IWBAN), a network of implantable medical sensors, is one of the emerging network paradigms due to the rapid proliferation of wireless technologies and growing demand of sophisticated healthcare. The wireless sensors in IWBAN is capable of communicating with each other through radio frequency (RF) link. However, recurring wireless communication inside the human body induces heat causing severe thermal damage to the human tissue which, if not controlled, may appear as a threat to human life. Moreover, higher propagation loss inside the human body as well as low-power requirement of the sensor nodes necessitate multi-hop communication for IWBAN. A IWBAN also requires meeting certain Quality of Service demands in terms of energy, delay, reliability etc. These pressing concerns engender the design of TRW-MAC: A thermal-aware receiver-driven wake-up radio enabled duty cycle MAC protocol for multi-hop IWBANs in Internet of Things. TRW-MAC introduces a thermal-aware duty cycle adjustment mechanism to reduce temperature inside the body and adopts wake-up radio (WuR) scheme for attaining higher energy efficiency. The protocol devises a wake-up estimation scheme to facilitate staggered wake-up schedule for multi-hop transmission. A superframe structure is introduced that utilizes both contention-based and contention free medium access operations. The performance of TRW-MAC is evaluated through simulations that exhibit its superior performance in attaining lower thermal-rise as well as satisfying other QoS metrics in terms of energy-efficiency, delay and reliability

QoS in Body Area Networks: A survey

Body Area Networks (BANs) are becoming increasingly popular and have shown great potential in real-time monitoring of the human body. With the promise of being cost-effective and unobtrusive and facilitating continuous monitoring, BANs have attracted a wide range of monitoring applications, including medical and healthcare, sports, and rehabilitation systems. Most of these applications are real time and life critical and require a strict guarantee of Quality of Service (QoS) in terms of timeliness, reliability, and so on. Recently, there has been a number of proposals describing diverse approaches or frameworks to achieve QoS in BANs (i.e., for different layers or tiers and different protocols). This survey put these individual efforts into perspective and presents a more holistic view of the area. In this regard, this article identifies a set of QoS requirements for BAN applications and shows how these requirements are linked in a three-tier BAN system and presents a comprehensive review of the existing proposals against those requirements. In addition, open research issues, challenges, and future research directions in achieving these QoS in BANs are highlighted.</jats:p

The role of cross-layered designs in wireless body area network

With recent advancement, Wireless Body Area Network (WBAN) plays an important role to detect various diseases of a patient in advance and informs the medical team about the life threatening situation. WBAN comprises of small intelligent Biomedical sensors which are implanted inside patient body and attached on the surface of a patient to monitor different vital signs, namely; respiratory rate, ECG, EMG, temperature, blood pressure, glucose. The routing layer of WBAN has the same challenging problems as similarly faced in WSN but the unique challenge is the temperature-rise during monitoring of vital signs and data transmission. IEEE 802.15.6 MAC Superframe of WBAN is different from IEEE 802.15.4 MAC of WSN and provides channels to emergency and non-emergency data for transmission. As similarly seen in WSN, PHY layer of IEEE 802.15.4 and IEEE 802.15.6 provide various modulation techniques for data transmission. The purpose of this study is to familiar with routing layer, MAC layer and PHY layer in the cross-layer design of WBA

Multi-constrained mechanism for intra-body area network quality-of-service aware routing in wireless body sensor networks

Wireless Body Sensor Networks (WBSNs) have witnessed tremendous research interests in a wide range of medical and non-medical fields. In the delaysensitive application scenarios, the critical data packets are highly delay-sensitive which require some Quality-of-Service (QoS) to reach the intended destinations. The categorization of data packets and selection of poor links may have detrimental impacts on overall performance of the network. In WBSN, various biosensors transmit the sensed data towards a destination for further analysis. However, for an efficient data transmission, it is very important to transmit the sensed data towards the base station by satisfying the QoS multi-constrained requirements of the healthcare applications in terms of least end-to-end delay and high reliability, throughput, Packet Delivery Ratio (PDR), and route stability performance. Most of the existing WBSN routing schemes consider traffic prioritization to solve the slot allocation problem. Consequently, the data transmission may face high delays, packet losses, retransmissions, lack of bandwidth, and insufficient buffer space. On the other hand, an end-to-end route is discovered either using a single or composite metric for the data transmission. Thus, it affects the delivery of the critical data through a less privileged manner. Furthermore, a conventional route repair method is considered for the reporting of broken links which does not include surrounding interference. As such, this thesis presents the Multi-constrained mechanism for Intra- Body Area Network QoS aware routing (MIQoS) with Low Latency Traffic Prioritization (LLTP), Optimized Route Discovery (ORD), and Interference Adaptive Route Repair (IARR) schemes for the healthcare application of WBSN with an objective of improving performance in terms of end-to-end delay, route stability, and throughput. The proposed LLTP scheme considers various priority queues with an optimized scheduling mechanism that dynamically identifies and prioritizes the critical data traffic in an emergency situation to enhance the critical data transmission. Consequently, this will avoid unnecessary queuing delay. The ORD scheme incorporates an improved and multi-facet routing metric, Link Quality Metric (LQM) optimizes the route selection by considering link delay, link delivery ratio, and link interference ratio. The IARR scheme identifies the links experiencing transmission issues due to channel interference and makes a coherent decision about route breakage based on the long term link performance to avoid unnecessary route discovery notifications. The simulation results verified the improved performance in terms of reducing the end-to-end delay by 29%, increasing the throughput by 22% and route stability by 26% as compared to the existing routing schemes such as TTRP, PA-AODV and standard AODV. In conclusion, MIQoS proves to be a suitable routing mechanism for a wide range of interesting applications of WBSN that require fast, reliable and multi-hop communication in heavily loaded network traffic scenarios

A review of routing protocols in wireless body area networks

Recent technological advancements in wireless communication, integrated circuits and Micro-Electro-Mechanical Systems (MEMs) has enabled miniaturized, low-power, intelligent, invasive/ non-invasive micro and nano-technology sensor nodes placed in or on the human body for use in monitoring body function and its immediate environment referred to as Body Area Networks (BANs). BANs face many stringent requirements in terms of delay, power, temperature and network lifetime which need to be taken into serious consideration in the design of different protocols. Since routing protocols play an important role in the overall system performance in terms of delay, power consumption, temperature and so on, a thorough study on existing routing protocols in BANs is necessary. Also, the specific challenges of BANs necessitates the design of new routing protocols specifically designed for BANs. This paper provides a survey of existing routing protocols mainly proposed for BANs. These protocols are further classified into five main categories namely, temperature based, cross-layer, cluster based, cost-effective and QoS-based routing, where each protocol is described under its specified category. Also, comparison among routing protocols in each category is given. © 2013 ACADEMY PUBLISHER

Energy efficiency considerations in software‐defined wireless body area networks

Wireless body area networks (WBAN) provide remote services for patient monitoring which allows healthcare practitioners to diagnose, monitor, and prescribe them without their physical presence. To address the shortcomings of WBAN, software-defined networking (SDN) is regarded as an effective approach in this prototype. However, integrating SDN into WBAN presents several challenges in terms of safe data exchange, architectural framework, and resource efficiency. Because energy expenses account for a considerable portion of network expenditures, energy efficiency has to turn out to be a crucial design criterion for modern networking methods. However, creating energy-efficient systems is difficult because they must balance energy efficiency with network performance. In this article, the energy efficiency features are discussed that can widely be used in the software-defined wireless body area network (SDWBAN). A comprehensive survey has been carried out for various modern energy efficiency models based on routing algorithms, optimization models, secure data delivery, and traffic management. A comparative assessment of all the models has also been carried out for various parameters. Furthermore, we explore important concerns and future work in SDWBAN energy efficiency

Toward Brain Area Sensor Wireless Network

RÉSUMÉ De nouvelles approches d'interfaçage neuronal de haute performance sont requises pour les interfaces cerveau-machine (BMI) actuelles. Cela nécessite des capacités d'enregistrement/stimulation performantes en termes de vitesse, qualité et quantité, c’est à dire une bande passante à fréquence plus élevée, une résolution spatiale, un signal sur bruit et une zone plus large pour l'interface avec le cortex cérébral. Dans ce mémoire, nous parlons de l'idée générale proposant une méthode d'interfaçage neuronal qui, en comparaison avec l'électroencéphalographie (EEG), l'électrocorticographie (ECoG) et les méthodes d'interfaçage intracortical conventionnelles à une seule unité, offre de meilleures caractéristiques pour implémenter des IMC plus performants. Les avantages de la nouvelle approche sont 1) une résolution spatiale plus élevée - en dessous dumillimètre, et une qualité de signal plus élevée - en termes de rapport signal sur bruit et de contenu fréquentiel - comparé aux méthodes EEG et ECoG; 2) un caractère moins invasif que l'ECoG où l'enlèvement du crâne sous une opération d'enregistrement / stimulation est nécessaire; 3) une plus grande faisabilité de la libre circulation du patient à l'étude - par rapport aux deux méthodes EEG et ECoG où de nombreux fils sont connectés au patient en cours d'opération; 4) une utilisation à long terme puisque l'interface implantable est sans fil - par rapport aux deux méthodes EEG et ECoG qui offrent des temps limités de fonctionnement. Nous présentons l'architecture d'un réseau sans fil de microsystèmes implantables, que nous appelons Brain Area Sensor NETwork (Brain-ASNET). Il y a deux défis principaux dans la réalisation du projet Brain-ASNET. 1) la conception et la mise en oeuvre d'un émetteur-récepteur RF de faible consommation compatible avec la puce de capteurs de réseau implantable, et, 2) la conception d'un protocole de réseau de capteurs sans fil (WSN) ad-hoc économe en énergie. Dans ce mémoire, nous présentons un protocole de réseau ad-hoc économe en énergie pour le réseau désiré, ainsi qu'un procédé pour surmonter le problème de la longueur de paquet variable causé par le processus de remplissage de bit dans le protocole HDLC standard. Le protocole adhoc proposé conçu pour Brain-ASNET présente une meilleure efficacité énergétique par rapport aux protocoles standards tels que ZigBee, Bluetooth et Wi-Fi ainsi que des protocoles ad-hoc de pointe. Le protocole a été conçu et testé par MATLAB et Simulink.----------ABSTRACT New high-performance neural interfacing approaches are demanded for today’s Brain-Machine Interfaces (BMI). This requires high-performance recording/stimulation capabilities in terms of speed, quality, and quantity, i.e. higher frequency bandwidth, spatial resolution, signal-to-noise, and wider area to interface with the cerebral cortex. In this thesis, we talk about the general proposed idea of a neural interfacing method which in comparison with Electroencephalography (EEG), Electrocorticography (ECoG), and, conventional Single-Unit Intracortical neural interfacing methods offers better features to implement higher-performance BMIs. The new approach advantages are 1) higher spatial resolution – down to sub-millimeter, and higher signal quality − in terms of signal-to-noise ratio and frequency content − compared to both EEG and ECoG methods. 2) being less invasive than ECoG where skull removal Under recording/stimulation surgery is required. 3) higher feasibility of freely movement of patient under study − compared to both EEG and ECoG methods where lots of wires are connected to the patient under operation. 4) long-term usage as the implantable interface is wireless − compared to both EEG and ECoG methods where it is practical for only a limited time under operation. We present the architecture of a wireless network of implantable microsystems, which we call it Brain Area Sensor NETwork (Brain-ASNET). There are two main challenges in realization of the proposed Brain-ASNET. 1) design and implementation of power-hungry RF transceiver of the implantable network sensors' chip, and, 2) design of an energy-efficient ad-hoc Wireless Sensor Network (WSN) protocol. In this thesis, we introduce an energy-efficient ad-hoc network protocol for the desired network, along with a method to overcome the issue of variable packet length caused by bit stuffing process in standard HDLC protocol. The proposed ad-hoc protocol designed for Brain-ASNET shows better energy-efficiency compared to standard protocols like ZigBee, Bluetooth, and Wi-Fi as well as state-of-the-art ad-hoc protocols. The protocol was designed and tested by MATLAB and Simulink