32,941 research outputs found
A model-based residual approach for human-robot collaboration during manual polishing operations
A fully robotized polishing of metallic surfaces may be insufficient in case of parts with complex geometric shapes, where a manual intervention is still preferable. Within the EU SYMPLEXITY project, we are considering tasks where manual polishing operations are performed in strict physical Human-Robot Collaboration (HRC) between a robot holding the part and a human operator equipped with an abrasive tool. During the polishing task, the robot should firmly keep the workpiece in a prescribed sequence of poses, by monitoring and resisting to the external forces applied by the operator. However, the user may also wish to change the orientation of the part mounted on the robot, simply by pushing or pulling the robot body and changing thus its configuration. We propose a control algorithm that is able to distinguish the external torques acting at the robot joints in two components, one due to the polishing forces being applied at the end-effector level, the other due to the intentional physical interaction engaged by the human. The latter component is used to reconfigure the manipulator arm and, accordingly, its end-effector orientation. The workpiece position is kept instead fixed, by exploiting the intrinsic redundancy of this subtask. The controller uses a F/T sensor mounted at the robot wrist, together with our recently developed model-based technique (the residual method) that is able to estimate online the joint torques due to contact forces/torques applied at any place along the robot structure. In order to obtain a reliable residual, which is necessary to implement the control algorithm, an accurate robot dynamic model (including also friction effects at the joints and drive gains) needs to be identified first. The complete dynamic identification and the proposed control method for the human-robot collaborative polishing task are illustrated on a 6R UR10 lightweight manipulator mounting an ATI 6D sensor
Simple virtual slip force sensor for walking biped robots
This paper presents a novel simple Virtual Slip Force Sensor (VSFS) for a walking biped. Bipeds walking stability is critical and they tend to lose it easily in real environments. Among the significant aspects that affect the stability is the availability of the required friction force which is necessary for the robot not to slip. In this paper we propose the use of the virtual sensor to detect the slip force. The design structure of the VSFS consists of two steps, in the first step it utilizes the measured acceleration of the center of mass (CoM) and the ZMP signals in the simple linear inverted pendulum model (LIPM) to estimate the position of the CoM, and in the second step the Newton law is employed to find the total ground reaction force (GRF) for each leg based on the position of CoM. Then both the estimated force and the measured force from the sensors assembled at the foot are used to detect the slip force. The validity of the proposed estimation method was confirmed by simulations on 3D dynamics model of the humanoid robot SURALP while walking. The results are promising and prove themselves well
Trajectory Synthesis for Fisher Information Maximization
Estimation of model parameters in a dynamic system can be significantly
improved with the choice of experimental trajectory. For general, nonlinear
dynamic systems, finding globally "best" trajectories is typically not
feasible; however, given an initial estimate of the model parameters and an
initial trajectory, we present a continuous-time optimization method that
produces a locally optimal trajectory for parameter estimation in the presence
of measurement noise. The optimization algorithm is formulated to find system
trajectories that improve a norm on the Fisher information matrix. A
double-pendulum cart apparatus is used to numerically and experimentally
validate this technique. In simulation, the optimized trajectory increases the
minimum eigenvalue of the Fisher information matrix by three orders of
magnitude compared to the initial trajectory. Experimental results show that
this optimized trajectory translates to an order of magnitude improvement in
the parameter estimate error in practice.Comment: 12 page
A Soft Robotic Cover with Dual Thermal Display and Sensing Capabilities
We propose a new robotic cover prototype that achieves thermal display while
also being soft. We focus on the thermal cue because previous human studies
have identified it as part of the touch pleasantness. The robotic cover surface
can be regulated to the desired temperature by circulating water through a
thermally conductive pipe embedded in the cover, of which temperature is
controlled. Besides, an observer for estimating heat from human contact is
implemented; it can detect human interaction while displaying the desired
temperature without temperature sensing on the surface directly. We assessed
the validity of the prototype in experiments of temperature control and contact
detection by human hand
- …