27 research outputs found
High Capacity CDMA and Collaborative Techniques
The thesis investigates new approaches to increase the user capacity and improve the error
performance of Code Division Multiple Access (CDMA) by employing adaptive interference cancellation
and collaborative spreading and space diversity techniques. Collaborative Coding Multiple
Access (CCMA) is also investigated as a separate technique and combined with CDMA. The
advantages and shortcomings of CDMA and CCMA are analysed and new techniques for both the
uplink and downlink are proposed and evaluated.
Multiple access interference (MAI) problem in the uplink of CDMA is investigated first. The
practical issues of multiuser detection (MUD) techniques are reviewed and a novel blind adaptive
approach to interference cancellation (IC) is proposed. It exploits the constant modulus (CM)
property of digital signals to blindly suppress interference during the despreading process and obtain
amplitude estimation with minimum mean squared error for use in cancellation stages. Two
new blind adaptive receiver designs employing successive and parallel interference cancellation
architectures using the CM algorithm (CMA) referred to as ‘CMA-SIC’ and ‘BA-PIC’, respectively,
are presented. These techniques have shown to offer near single user performance for large
number of users. It is shown to increase the user capacity by approximately two fold compared
with conventional IC receivers. The spectral efficiency analysis of the techniques based on output
signal-to interference-and-noise ratio (SINR) also shows significant gain in data rate. Furthermore,
an effective and low complexity blind adaptive subcarrier combining (BASC) technique using a
simple gradient descent based algorithm is proposed for Multicarrier-CDMA. It suppresses MAI
without any knowledge of channel amplitudes and allows large number of users compared with
equal gain and maximum ratio combining techniques normally used in practice.
New user collaborative schemes are proposed and analysed theoretically and by simulations
in different channel conditions to achieve spatial diversity for uplink of CCMA and CDMA. First,
a simple transmitter diversity and its equivalent user collaborative diversity techniques for CCMA
are designed and analysed. Next, a new user collaborative scheme with successive interference
cancellation for uplink of CDMA referred to as collaborative SIC (C-SIC) is investigated to reduce
MAI and achieve improved diversity. To further improve the performance of C-SIC under high
system loading conditions, Collaborative Blind Adaptive SIC (C-BASIC) scheme is proposed.
It is shown to minimize the residual MAI, leading to improved user capacity and a more robust
system. It is known that collaborative diversity schemes incur loss in throughput due to the need of
orthogonal time/frequency slots for relaying source’s data. To address this problem, finally a novel
near-unity-rate scheme also referred to as bandwidth efficient collaborative diversity (BECD) is proposed and evaluated for CDMA. Under this scheme, pairs of users share a single spreading sequence to exchange and forward their data employing a simple superposition or space-time
encoding methods. At the receiver collaborative joint detection is performed to separate each
paired users’ data. It is shown that the scheme can achieve full diversity gain at no extra bandwidth
as inter-user channel SNR becomes high.
A novel approach of ‘User Collaboration’ is introduced to increase the user capacity of CDMA
for both the downlink and uplink. First, collaborative group spreading technique for the downlink
of overloaded CDMA system is introduced. It allows the sharing of the same single spreading
sequence for more than one user belonging to the same group. This technique is referred to as
Collaborative Spreading CDMA downlink (CS-CDMA-DL). In this technique T-user collaborative
coding is used for each group to form a composite codeword signal of the users and then a
single orthogonal sequence is used for the group. At each user’s receiver, decoding of composite
codeword is carried out to extract the user’s own information while maintaining a high SINR performance.
To improve the bit error performance of CS-CDMA-DL in Rayleigh fading conditions,
Collaborative Space-time Spreading (C-STS) technique is proposed by combining the collaborative
coding multiple access and space-time coding principles. A new scheme for uplink of CDMA
using the ‘User Collaboration’ approach, referred to as CS-CDMA-UL is presented next. When
users’ channels are independent (uncorrelated), significantly higher user capacity can be achieved
by grouping multiple users to share the same spreading sequence and performing MUD on per
group basis followed by a low complexity ML decoding at the receiver. This approach has shown
to support much higher number of users than the available sequences while also maintaining the
low receiver complexity. For improved performance under highly correlated channel conditions,
T-user collaborative coding is also investigated within the CS-CDMA-UL system
Multi-user detection for multi-carrier communication systems
Doctor of PhilosophyDepartment of Electrical and Computer EngineeringBalasubramaniam NatarajanWireless broadband communications is a rapidly growing industry. New enabling technologies such as multi-carrier code division multiple access (MC-CDMA) are shaping the future of wireless systems. However, research efforts in improving MC-CDMA receiver performance
have received limited attention and there is a need for innovative receiver designs for next generation MC-CDMA. In this thesis, we propose novel multi-user detection (MUD) schemes to enhance the performance of both synchronous and asynchronous MC-CDMA. First, we adapt the ant colony optimization (ACO) approach to solve the optimal MUD problem in MC-CDMA systems. Our simulations indicate that the ACO based MUD converges to the optimal BER performance in relatively few iterations providing more that 95% savings in computational complexity. Second, we propose a new MUD structure specifically for asynchronous MC-CDMA. Previously proposed MUDs for asynchronous MC-CDMA perform the detection for one user (desired user) at a time, mandating multiple runs of the algorithm to detect all users' symbols. In this thesis, for the first time we present a MUD structure that detects all users' symbols simultaneously in one run by extending the receiver's integration window to capture the energy scattered in two consecutive symbol durations. We derive the optimal, decorrelator and minimum mean square error (MMSE) MUD for the extended window case. Our simulations demonstrate that the proposed MUD structures not only perform similar to a MUD that detects one user at a time, but its computational complexity is significantly lower. Finally, we extend the MUD ideas to multicarrier implementation of single carrier systems. Specifically, we employ the novel MUD structure as a multi-symbol detection scheme in CI-CDMA and illustrate the resulting performance gain via simulations
Iterative Detection for Overloaded Multiuser MIMO OFDM Systems
Inspired by multiuser detection (MUD) and the ‘Turbo principle’, this thesis deals with iterative interference cancellation (IIC) in overloaded multiuser multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems.
Linear detection schemes, such as zero forcing (ZF) and minimum mean square error (MMSE) cannot be used for the overloaded system because of the rank deficiency of channel matrix, while the optimal approach, the maximum likelihood (ML) detection has high computational complexity. In this thesis, an iterative interference cancellation (IIC) multiuser detection scheme with matched filter and convolutional codes is considered. The main idea of this combination is a low complexity receiver. Parallel interference cancellation (PIC) is employed to improve the multiuser receiver performance for overloaded systems. A log-likelihood ratio (LLR) converter is proposed to further improve the reliability of the soft value converted from the output of the matched filter. Simulation results show that the bit error rate (BER) performance of this method is close to the optimal approach for a two user system. However, for the four user or more user system, it has an error floor of the BER performance. For this case, a channel selection scheme is proposed to distinguish whether the channel is good or bad by using the mutual information based on the extrinsic information transfer (EXIT) chart. The mutual information can be predicted in a look-up table which greatly reduces the complexity. For those ‘bad’ channels identified by the channel selection, we introduce two adaptive transmission methods to deal with such channels: one uses a lower code rate, and the other is multiple transmissions. The use of an IIC receiver with the interleave-division multiple access (IDMA) to further improve the BER performance without any channel selection is also investigated. It has been shown that this approach can remove the error floor.
Finally, the influence of channel accuracy on the IIC is investigated. Pilot-based Wiener filter channel estimation is used to test and verify how much the IIC is influenced by the channel accuracy
Smart Antenna-Aided Multicarrier Transceivers for Mobile Communications
In spite of an immense interest from both the academic and the industrial communities, a practical multipleinput multiple-output (MIMO) transceiver architecture, capable of approaching channel capacity boundaries in realistic channel conditions remains largely an open problem. Consequently, in this treatise I derive an advanced iterative, so called turbo multi-antenna-multi-carrier (MAMC) receiver architecture. Following the philosophy of turbo processing, our turbo spacial division multiplexed (SDM)-orthogonal frequency division multiplexed (OFDM) receiver comprises a succession of soft-input-soft-output detection modules, which iteratively exchange soft bit-related information and thus facilitate a substantial improvement of the overall system performance. In this treatise, I explore two major aspects of the turbo wireless mobile receiver design. Firstly, I consider the problem of soft-decision-feedback aided acquisition of the propagation conditions experienced by the transmitted signal and secondly, I explore the issue of the soft-input-soft-output detection of the spatially-multiplexed information-carrying signals
Improved IDMA for Multiple Access of 5G
Due to its good performance and low complexity, IDMA is believed to be an important technique for future radio access (FRA). However, its performances are highly affected by the interleaver design. In this paper we propose two contributions to improve the performance of the IDMA. First, we propose a new interleaver design, called "NLM interleaver", which improves the computational complexity, reduces the bandwidth consumption and the memory requirements of the system, provides the quasi-orthogonal spreading codes and interleavers with a high security and offers infinite sets of codes and interleavers based on only one parameter. Second, we propose a new user grouping algorithm based on the correlation function to improve the resources (Codes, Interleavers). All users are divided into several equal-size groups where each group's data transmitted at the same time, over the same frequencies and the same interleaver. The simulation results indicate that the proposed scheme can achieve better performances compared to the existing algorithms