Latency-driven replication for globally distributed systems

Steen, M.R. van [Promotor]Pierre, G.E.O. [Copromotor

Synthesis and Verification of Digital Circuits using Functional Simulation and Boolean Satisfiability.

The semiconductor industry has long relied on the steady trend of transistor scaling, that is, the shrinking of the dimensions of silicon transistor devices, as a way to improve the cost and performance of electronic devices. However, several design challenges have emerged as transistors have become smaller. For instance, wires are not scaling as fast as transistors, and delay associated with wires is becoming more significant. Moreover, in the design flow for integrated circuits, accurate modeling of wire-related delay is available only toward the end of the design process, when the physical placement of logic units is known. Consequently, one can only know whether timing performance objectives are satisfied, i.e., if timing closure is achieved, after several design optimizations. Unless timing closure is achieved, time-consuming design-flow iterations are required. Given the challenges arising from increasingly complex designs, failing to quickly achieve timing closure threatens the ability of designers to produce high-performance chips that can match continually growing consumer demands. In this dissertation, we introduce powerful constraint-guided synthesis optimizations that take into account upcoming timing closure challenges and eliminate expensive design iterations. In particular, we use logic simulation to approximate the behavior of increasingly complex designs leveraging a recently proposed concept, called bit signatures, which allows us to represent a large fraction of a complex circuit's behavior in a compact data structure. By manipulating these signatures, we can efficiently discover a greater set of valid logic transformations than was previously possible and, as a result, enhance timing optimization. Based on the abstractions enabled through signatures, we propose a comprehensive suite of novel techniques: (1) a fast computation of circuit don't-cares that increases restructuring opportunities, (2) a verification methodology to prove the correctness of speculative optimizations that efficiently utilizes the computational power of modern multi-core systems, and (3) a physical synthesis strategy using signatures that re-implements sections of a critical path while minimizing perturbations to the existing placement. Our results indicate that logic simulation is effective in approximating the behavior of complex designs and enables a broader family of optimizations than previous synthesis approaches.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/61793/1/splaza_1.pd

Computer Science & Technology Series : XXI Argentine Congress of Computer Science. Selected papers

CACIC’15 was the 21thCongress in the CACIC series. It was organized by the School of Technology at the UNNOBA (North-West of Buenos Aires National University) in Junín, Buenos Aires. The Congress included 13 Workshops with 131 accepted papers, 4 Conferences, 2 invited tutorials, different meetings related with Computer Science Education (Professors, PhD students, Curricula) and an International School with 6 courses. CACIC 2015 was organized following the traditional Congress format, with 13 Workshops covering a diversity of dimensions of Computer Science Research. Each topic was supervised by a committee of 3-5 chairs of different Universities. The call for papers attracted a total of 202 submissions. An average of 2.5 review reports werecollected for each paper, for a grand total of 495 review reports that involved about 191 different reviewers. A total of 131 full papers, involving 404 authors and 75 Universities, were accepted and 24 of them were selected for this book.Red de Universidades con Carreras en Informática (RedUNCI

Computer Science & Technology Series : XXI Argentine Congress of Computer Science. Selected papers

CACIC’15 was the 21thCongress in the CACIC series. It was organized by the School of Technology at the UNNOBA (North-West of Buenos Aires National University) in Junín, Buenos Aires. The Congress included 13 Workshops with 131 accepted papers, 4 Conferences, 2 invited tutorials, different meetings related with Computer Science Education (Professors, PhD students, Curricula) and an International School with 6 courses. CACIC 2015 was organized following the traditional Congress format, with 13 Workshops covering a diversity of dimensions of Computer Science Research. Each topic was supervised by a committee of 3-5 chairs of different Universities. The call for papers attracted a total of 202 submissions. An average of 2.5 review reports werecollected for each paper, for a grand total of 495 review reports that involved about 191 different reviewers. A total of 131 full papers, involving 404 authors and 75 Universities, were accepted and 24 of them were selected for this book.Red de Universidades con Carreras en Informática (RedUNCI

Using TCP/IP traffic shaping to achieve iSCSI service predictability

This thesis reproduces the properties of load interference common in many storage devices using resource sharing for flexibility and maximum hardware utilization. The nature of resource sharing and load is studied and compared to assumptions and models used in previous work. The results are used to design a method for throttling iSCSI initiators, attached to an iSCSI target server, using a packet delay module in Linux Traffic Control. The packet delay throttle enables close-to-linear rate reduction for both read and write operations. Iptables and Ipset are used to add dynamic packet matching needed for rapidly changing throttling values. All throttling is achieved without triggering TCP retransmit timeout and subsequent slow start caused by packet loss. A control mechanism for dynamically adapting throttling values to rapidly changing workloads is implemented using a modified proportional integral derivative (PID) controller. Using experiments, control engineering filtering techniques and results from previous research, a suitable per resource saturation indicator was found. The indicator is an exponential moving average of the wait time of active resource consumers. It is used as input value to the PID controller managing the packet rates of resource consumers, creating a closed control loop managed by the PID controller. Finally a prototype of an autonomic resource prioritization framework is designed. The framework identifies and maintains information about resources, their consumers, their average wait time for active consumers and their set of throttleable consumers. The information is kept in shared memory and a PID controller is spawned for each resource, thus safeguarding read response times by throttling writers on a per-resource basis. The framework is exposed to extreme workload changes and demonstrates high ability to keep read response time below a predefined threshold. Using moderate tuning efforts the framework exhibits low overhead and resource consumption, promising suitability for large scale operation in production environments

A hardware-software codesign framework for cellular computing

Until recently, the ever-increasing demand of computing power has been met on one hand by increasing the operating frequency of processors and on the other hand by designing architectures capable of exploiting parallelism at the instruction level through hardware mechanisms such as super-scalar execution. However, both these approaches seem to have reached a plateau, mainly due to issues related to design complexity and cost-effectiveness. To face the stabilization of performance of single-threaded processors, the current trend in processor design seems to favor a switch to coarser-grain parallelization, typically at the thread level. In other words, high computational power is achieved not only by a single, very fast and very complex processor, but through the parallel operation of several processors, each executing a different thread. Extrapolating this trend to take into account the vast amount of on-chip hardware resources that will be available in the next few decades (either through further shrinkage of silicon fabrication processes or by the introduction of molecular-scale devices), together with the predicted features of such devices (e.g., the impossibility of global synchronization or higher failure rates), it seems reasonable to foretell that current design techniques will not be able to cope with the requirements of next-generation electronic devices and that novel design tools and programming methods will have to be devised. A tempting source of inspiration to solve the problems implied by a massively parallel organization and inherently error-prone substrates is biology. In fact, living beings possess characteristics, such as robustness to damage and self-organization, which were shown in previous research as interesting to be implemented in hardware. For instance, it was possible to realize relatively simple systems, such as a self-repairing watch. Overall, these bio-inspired approaches seem very promising but their interest for a wider audience is problematic because their heavily hardware-oriented designs lack some of the flexibility achievable with a general purpose processor. In the context of this thesis, we will introduce a processor-grade processing element at the heart of a bio-inspired hardware system. This processor, based on a single-instruction, features some key properties that allow it to maintain the versatility required by the implementation of bio-inspired mechanisms and to realize general computation. We will also demonstrate that the flexibility of such a processor enables it to be evolved so it can be tailored to different types of applications. In the second half of this thesis, we will analyze how the implementation of a large number of these processors can be used on a hardware platform to explore various bio-inspired mechanisms. Based on an extensible platform of many FPGAs, configured as a networked structure of processors, the hardware part of this computing framework is backed by an open library of software components that provides primitives for efficient inter-processor communication and distributed computation. We will show that this dual software–hardware approach allows a very quick exploration of different ways to solve computational problems using bio-inspired techniques. In addition, we also show that the flexibility of our approach allows it to exploit replication as a solution to issues that concern standard embedded applications