A Multipurpose Testbed for Full-Duplex Wireless Communications

Unlike in the traditional half-duplex (HD) mode of transmission over a wireless link, in the full-duplex (FD) mode both terminals receive and transmit on the same frequency band, simultaneously. Hence, FD gives us up to twice the spectral efficiency of HD, has the potential to resolve the hidden terminal problem, and makes relaying much more efficient. As such, FD is one of the most promising new physical layer techniques being developed at the moment. However, a major difficulty in achieving FD operation is that it requires cancelation of self-interference. In this demonstration, we show various methods of operating in FD mode, offering live, interactive, and visual insight into the operation of the link. The parameters shown include the power budget, signal-to-interference-and-noise ratio, frequency spectrum, constellation graphs, and bit error rate. We compare the operation of the same link in HD and FD mode, highlight the effect of each type of cancelation, as well as show what happens when self-interference is not mitigated at all

Application-aware Cognitive Multi-hop Wireless Networking Testbed and Experiments

In this thesis, we present a new architecture for application-aware cognitive multihop wireless networks (AC-MWN) with testbed implementations and experiments. Cognitive radio is a technique to adaptively use the spectrum so that the resource can be used more efficiently in a low cost way. Multihop wireless networks can be deployed quickly and flexibly without a fixed infrastructure. In presented new architecture, we study backbone routing schemes with network cognition, routing scheme with network coding and spectrum adaptation. A testbed is implemented to test the schemes for AC-MWN. In addition to basic measurements, we implement a video streaming application based on the AC-MWN architecture using cognitive radios. The Testbed consists of three cognitive radios and three Linux laptops equipped with GNU Radio and GStreamer, open source software development toolkit and multimedia framework respectively. Resulting experiments include a range from basic half duplex data to full duplex voice communications and audio/video streaming with spectrum sensing. This testbed is a foundation for a scalable multipurpose testbed that can be used to test such networks as AC-MWN, adhoc, MANET, VANET, and wireless sensor networks. Experiment results demonstrate that the AC-MWN is applicable and valuable for future low-cost and flexible communication networks. Adviser: Yi Qia

Non-Linear Digital Self-Interference Cancellation for In-Band Full-Duplex Radios Using Neural Networks

Full-duplex systems require very strong self-interference cancellation in order to operate correctly and a significant part of the self-interference signal is due to non-linear effects created by various transceiver impairments. As such, linear cancellation alone is usually not sufficient and sophisticated non-linear cancellation algorithms have been proposed in the literature. In this work, we investigate the use of a neural network as an alternative to the traditional non-linear cancellation method that is based on polynomial basis functions. Measurement results from a full-duplex testbed demonstrate that a small and simple feed-forward neural network canceler works exceptionally well, as it can match the performance of the polynomial non-linear canceler with significantly lower computational complexity.Comment: Presented at the IEEE International Workshop on Signal Processing Advances in Wireless Communications (SPAWC) 201

LTE Spectrum Sharing Research Testbed: Integrated Hardware, Software, Network and Data

This paper presents Virginia Tech's wireless testbed supporting research on long-term evolution (LTE) signaling and radio frequency (RF) spectrum coexistence. LTE is continuously refined and new features released. As the communications contexts for LTE expand, new research problems arise and include operation in harsh RF signaling environments and coexistence with other radios. Our testbed provides an integrated research tool for investigating these and other research problems; it allows analyzing the severity of the problem, designing and rapidly prototyping solutions, and assessing them with standard-compliant equipment and test procedures. The modular testbed integrates general-purpose software-defined radio hardware, LTE-specific test equipment, RF components, free open-source and commercial LTE software, a configurable RF network and recorded radar waveform samples. It supports RF channel emulated and over-the-air radiated modes. The testbed can be remotely accessed and configured. An RF switching network allows for designing many different experiments that can involve a variety of real and virtual radios with support for multiple-input multiple-output (MIMO) antenna operation. We present the testbed, the research it has enabled and some valuable lessons that we learned and that may help designing, developing, and operating future wireless testbeds.Comment: In Proceeding of the 10th ACM International Workshop on Wireless Network Testbeds, Experimental Evaluation & Characterization (WiNTECH), Snowbird, Utah, October 201

Network-Assisted Handover for Heterogeneous Wireless Networks using IEEE 802.21

The IEEE 802.21 is a standard for enabling handover in heterogeneous wireless networks. Published in January 2009, it defines protocols and messages for mobile-to-node and node-to-node communication in a technology-neutral and flexible manner. The need arises because of the widespread diffusion of different technologies for wireless communications (e.g., WiFi, WiMAX, LTE) coexisting in the same geographical area. Even though the number of multi-radio multi-technology mobile devices is increasing significantly, there are no open solutions in the market to enable efficient inter-technology handover. As is often the case with communication standards, the structure of the required components, the procedures, and the algorithms are left unspecified by the IEEE 802.21 standard so as to promote competion by differentiation of equipment capabilities and services. The contribution of this thesis is two-fold: i) a design and an implemenation of the Media Independent Information Service (MIIS) server; and, ii) a solution to enable network-assisted handover using the IEEE 802.21 standard, aimed at reducing the handover latency and the energy consumption of mobile devices due to scanning. The MIIS server has been fully implemented in C++ under Linux. In order to perform testbed evaluations, all the required components have been implemented, as well, within an open source framework for IEEE 802.21 called ODTONE. Modifications to the latter have been performed for optimization and fine tuning, and for extending those functional modules needed but not fully implemented. For a realistic evaluation, Linux-based embedded COTS devices have been used, equipped with multiple IEEE 802.11a and IEEE 802.11g wireless network interface cards. This has required additional development for kernel/user space binding and hardware control. Testbed results are reported to show the effectiveness of the proposed solution, also proving the MIIS server scalability

MPLS & QoS in Virtual Environments

The rise of high performance computing has seen a shift of services from locally managed Data Centers, to centralized globally redundant Data Centers (Cloud Computing). The scale of operation and churn required for cloud computing has in turn led to the rise of faster and programmable network pathing, via SDN & NFV. Cloud compute resources are accessible to individual researchers, as well as larger organizations. Cloud computing relies heavily on virtualization and abstraction of resources. The interconnect between these resources is more complex than ever, due to the need to seamlessly move from virtual to physical to hybrid networks and resources. MPLS as a technology is robust and has been used as transport for decades with a good track record. QoS has been available within most protocols to ensure service levels are maintained. The integration of MPLS, QoS and virtual environments is a space of increasing interest. It would allow for the seamless movement of traffic from end to end without the need for specialized hardware or vendor lock-in. In this thesis, the performance gains of IP/MPLS networks utilizing QoS on commercially available virtual environments has been investigated and studied. Latency was captured via round trip time metrics and tabulated for voice, video and data, with QoS and congestion as the primary differentiators. The study discusses the approach taken, the common thinking, and finally analyzes the results of a simulation, in order to show that MPLS & QoS benefits are viable in virtualized environments

Cost-Effective and Energy-Efficient Techniques for Underwater Acoustic Communication Modems

Finally, the modem developed has been tested experimentally in laboratory (aquatic environment) showing that can communicates at different data rates (100..1200 bps) compared to state-of-the-art research modems. The software used include LabVIEW, MATLAB, Simulink, and Multisim (to test the electronic circuit built) has been employed.Underwater wireless sensor networks (UWSNs) are widely used in many applications related to ecosystem monitoring, and many more fields. Due to the absorption of electromagnetic waves in water and line-of-sight communication of optical waves, acoustic waves are the most suitable medium of communication in underwater environments. Underwater acoustic modem (UAM) is responsible for the transmission and reception of acoustic signals in an aquatic channel. Commercial modems may communicate at longer distances with reliability, but they are expensive and less power efficient. Research modems are designed by using a digital-signal-processor (DSP is expensive) and field-programmable-gate-array (FPGA is high power consuming device). In addition to, the use of a microcontroller is also a common practice (which is less expensive) but provides limited computational power. Hence, there is a need for a cost-effective and energy-efficient UAM to be used in budget limited applications. In this thesis different objectives are proposed. First, to identify the limitations of state-of-the-art commercial and research UAMs through a comprehensive survey. The second contribution has been the design of a low-cost acoustic modem for short-range underwater communications by using a single board computer (Raspberry-Pi), and a microcontroller (Atmega328P). The modulator, demodulator and amplifiers are designed with discrete components to reduce the overall cost. The third contribution is to design a web based underwater acoustic communication testbed along with a simulation platform (with underwater channel and sound propagation models), for testing modems. The fourth contribution is to integrate in a single module two important modules present in UAMs: the PSK modulator and the power amplifier

IEEE 802.15.4e: a Survey

Several studies have highlighted that the IEEE 802.15.4 standard presents a number of limitations such as low reliability, unbounded packet delays and no protection against interference/fading, that prevent its adoption in applications with stringent requirements in terms of reliability and latency. Recently, the IEEE has released the 802.15.4e amendment that introduces a number of enhancements/modifications to the MAC layer of the original standard in order to overcome such limitations. In this paper we provide a clear and structured overview of all the new 802.15.4e mechanisms. After a general introduction to the 802.15.4e standard, we describe the details of the main 802.15.4e MAC behavior modes, namely Time Slotted Channel Hopping (TSCH), Deterministic and Synchronous Multi-channel Extension (DSME), and Low Latency Deterministic Network (LLDN). For each of them, we provide a detailed description and highlight the main features and possible application domains. Also, we survey the current literature and summarize open research issues