Signal and System Design for Wireless Power Transfer : Prototype, Experiment and Validation

A new line of research on communications and signals design for Wireless Power Transfer (WPT) has recently emerged in the communication literature. Promising signal strategies to maximize the power transfer efficiency of WPT rely on (energy) beamforming, waveform, modulation and transmit diversity, and a combination thereof. To a great extent, the study of those strategies has so far been limited to theoretical performance analysis. In this paper, we study the real over-the-air performance of all the aforementioned signal strategies for WPT. To that end, we have designed, prototyped and experimented an innovative radiative WPT architecture based on Software-Defined Radio (SDR) that can operate in open-loop and closed-loop (with channel acquisition at the transmitter) modes. The prototype consists of three important blocks, namely the channel estimator, the signal generator, and the energy harvester. The experiments have been conducted in a variety of deployments, including frequency flat and frequency selective channels, under static and mobility conditions. Experiments highlight that a channeladaptive WPT architecture based on joint beamforming and waveform design offers significant performance improvements in harvested DC power over conventional single-antenna/multiantenna continuous wave systems. The experimental results fully validate the observations predicted from the theoretical signal designs and confirm the crucial and beneficial role played by the energy harvester nonlinearity.Comment: Accepted to IEEE Transactions on Wireless Communication

Integrated source and channel encoded digital communication system design study

The particular Ku-band carrier, PN despreading, and symbol synchronization strategies, which were selected for implementation in the Ku-band transponder aboard the orbiter, were assessed and evaluated from a systems performance viewpoint, verifying that system specifications were met. A study was performed of the design and implementation of tracking techniques which are suitable for incorporation into the Orbiter Ku-band communication system. Emphasis was placed on maximizing tracking accuracy and communication system flexibility while minimizing cost, weight, and system complexity of Orbiter and ground systems hardware. The payload communication study assessed the design and performance of the forward link and return link bent-pipe relay modes for attached and detached payloads. As part of this study, a design for a forward link bent-pipe was proposed which employs a residual carrier but which is tracked by the existing Costas loop

Self-configurable radio receiver system and method for use with signals without prior knowledge of signal defining characteristics

A method, radio receiver, and system to autonomously receive and decode a plurality of signals having a variety of signal types without a priori knowledge of the defining characteristics of the signals is disclosed. The radio receiver is capable of receiving a signal of an unknown signal type and, by estimating one or more defining characteristics of the signal, determine the type of signal. The estimated defining characteristic(s) is/are utilized to enable the receiver to determine other defining characteristics. This in turn, enables the receiver, through multiple iterations, to make a maximum-likelihood (ML) estimate for each of the defining characteristics. After the type of signal is determined by its defining characteristics, the receiver selects an appropriate decoder from a plurality of decoders to decode the signal

On the benefits of phase shift keying to optical telecommunication systems

Les avantages de la modulation de phase vis-à-vis la modulation d’intensité pour les réseaux optiques sont claires et accepté par la communauté scientifique des télécommunications optiques. Surtout, la modulation de phase montre une meilleure sensibilité au bruit, ainsi qu’une plus grande tolérance aux effets non-linéaires que la modulation d’intensité. Nous présentons dans cette thése un étude qui vise à développer les avantages de la modulation de phase. Nous attaquons d’abord la complexité du récepteur en détection directe, en proposant une nouvelle configuration dont la complexité est comparable à celle du récepteur pour la modulation d’intensité traditionnel, mais avec des meilleures performances. Cette solution pourrait convenir pour les réseaux métropolitains (et même d’accès) à haut débit binaire. Nous passons ensuite à l’examen de la possibilité d’utiliser des amplificateur à semi-conducteur (SOA) au lieu des amplificateurs à fibre dopée à l’erbium pour fournir amplification optique aux signaux modulés en phase. Les non-linéarité des SOA sont étudiées, et un compensateur simple et très efficace est proposé. Les avantages des amplificateurs à semi-conducteur par rapport à ceux à fibre sont bien connus. Surtout, la méthode que nous proposons permettrait l’integrabilité des SOA avec d’autres composants de réseau (par exemple, le récepteur nommé cidessus), menant à des solutions technologiques de petite taille et efficaces d’un point de vue énergétique. Il y a deux types de systèmes pour signaux modulés en phase: basé sur la détection directe, ou sur les récepteurs cohérents. Dans le dernière partie de ce travail, nous nous concentrons sur cette dernière catégorie, et nous comparons deux solutions possibles pour la mise à niveau des réseaux terrestres actuel. Nous comparons deux configurations dont les performances sont très comparables en termes de sensibilité au bruit, mais nous montrons comment la meilleure tolérance aux effets non linéaires (en particuliers dans les systèmes à débit mixte) fait que une solution soit bien plus efficace que l’autre.The advantages of phase modulation (PM) vis-à-vis intensity modulation for optical networks are accepted by the optical telecommunication community. PM exhibits a higher noise sensitivity than intensity modulation, and it is more tolerant to the effects of fiber nonlinearity. In this thesis we examine the challenges and the benefits of working with different aspects of phase modulation. Our first contribution tackles the complexity of the direct detection noncoherent receiver for differentially encoded quadrature phase shift keying. We examine a novel configuration whose complexity is comparable to that of traditional receivers for intensity modulation, yet outperforming it. We show that under severe nonlinear impairments, our proposed receiver works almost as well as the conventional receiver, with the advantage of being much less complex. We also show that the proposed receiver is tolerant to chromatic dispersion, and to detuning of the carrier frequency. This solution might be suitable for high-bit rates metro (and even access) networks. Our second contribution deals with the challenges of using semiconductor optical amplifiers (SOAs) instead of typical erbium doped fiber amplifiers (EDFAs) to provide amplification to phase modulated signals. SOAs nonlinearities are investigated, and we propose a simple and very effective feed-forward compensator. Above all, the method we propose would permit the integrability of SOAs with other network components (for example, the aforementioned receiver) achieving small size, power efficient sub-systems. Phase modulation paves the way to high spectral efficiency, especially when paired with digital coherent receivers. With the digital coherent receiver, the degree of freedom offered by polarization can be exploited to increase the channel bit rate without increasing its spectral occupancy. In the last part of this work we focus on polarization multiplexed signaling paired with coherent reception and digital signal processing. Our third contribution provides insight on the strategies for upgrading current terrestrial core networks to high bit rates. This is a particularly challenging scenario, as phase modulation has to coexist with previously installed intensity modulated channels. We compare two configurations which have received much attention in the literature. These solutions show comparable performance in terms of back-to-back noise sensitivity, and yet are not equivalent. We show how the superior tolerance to nonlinear fiber propagation (and particularly to cross phase modulation induced by the presence of intensity modulated channels) makes one of them much more effective than the other

Receiver design for nonlinearly distorted OFDM : signals applications in radio-over-fiber systems

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 201

Shuttle Ku-band signal design study

Carrier synchronization and data demodulation of Unbalanced Quadriphase Shift Keyed (UQPSK) Shuttle communications' signals by optimum and suboptimum methods are discussed. The problem of analyzing carrier reconstruction techniques for unbalanced QPSK signal formats is addressed. An evaluation of the demodulation approach of the Ku-Band Shuttle return link for UQPSK when the I-Q channel power ratio is large is carried out. The effects that Shuttle rocket motor plumes have on the RF communications are determined also. The effect of data asymmetry on bit error probability is discussed

Programmable rate modem utilizing digital signal processing techniques

The engineering development study to follow was written to address the need for a Programmable Rate Digital Satellite Modem capable of supporting both burst and continuous transmission modes with either binary phase shift keying (BPSK) or quadrature phase shift keying (QPSK) modulation. The preferred implementation technique is an all digital one which utilizes as much digital signal processing (DSP) as possible. Here design tradeoffs in each portion of the modulator and demodulator subsystem are outlined, and viable circuit approaches which are easily repeatable, have low implementation losses and have low production costs are identified. The research involved for this study was divided into nine technical papers, each addressing a significant region of concern in a variable rate modem design. Trivial portions and basic support logic designs surrounding the nine major modem blocks were omitted. In brief, the nine topic areas were: (1) Transmit Data Filtering; (2) Transmit Clock Generation; (3) Carrier Synthesizer; (4) Receive AGC; (5) Receive Data Filtering; (6) RF Oscillator Phase Noise; (7) Receive Carrier Selectivity; (8) Carrier Recovery; and (9) Timing Recovery