2,572 research outputs found
Efficient hardware implementations of high throughput SHA-3 candidates keccak, luffa and blue midnight wish for single- and multi-message hashing
In November 2007 NIST announced that it would organize the SHA-3 competition to select a new cryptographic hash function family by 2012. In the selection process, hardware performances of the candidates will play an important role. Our analysis of previously proposed hardware implementations shows that three SHA-3 candidate algorithms can provide superior performance in hardware: Keccak, Luffa and Blue Midnight Wish (BMW). In this paper, we provide efficient and fast hardware implementations of these three algorithms. Considering both single- and multi-message hashing applications with an emphasis on both speed and efficiency, our work presents more comprehensive analysis of their hardware performances by providing different performance figures for different target devices. To our best knowledge, this is the first work that provides a comparative analysis of SHA-3 candidates in multi-message applications. We discover that BMW algorithm can provide much higher throughput than previously reported if used in multi-message hashing. We also show that better utilization of resources can increase speed via different configurations. We implement our designs using Verilog HDL, and map to both ASIC and FPGA devices (Spartan3, Virtex2, and Virtex 4) to give a better comparison with those in the literature. We report total area, maximum frequency, maximum throughput and throughput/area of the designs for all target devices. Given that the selection process for SHA3 is still open; our results will be instrumental to evaluate the hardware performance of the candidates
A Standalone FPGA-based Miner for Lyra2REv2 Cryptocurrencies
Lyra2REv2 is a hashing algorithm that consists of a chain of individual
hashing algorithms, and it is used as a proof-of-work function in several
cryptocurrencies. The most crucial and exotic hashing algorithm in the
Lyra2REv2 chain is a specific instance of the general Lyra2 algorithm. This
work presents the first hardware implementation of the specific instance of
Lyra2 that is used in Lyra2REv2. Several properties of the aforementioned
algorithm are exploited in order to optimize the design. In addition, an
FPGA-based hardware implementation of a standalone miner for Lyra2REv2 on a
Xilinx Multi-Processor System on Chip is presented. The proposed Lyra2REv2
miner is shown to be significantly more energy efficient than both a GPU and a
commercially available FPGA-based miner. Finally, we also explain how the
simplified Lyra2 and Lyra2REv2 architectures can be modified with minimal
effort to also support the recent Lyra2REv3 chained hashing algorithm.Comment: 13 pages, accepted for publication in IEEE Trans. Circuits Syst. I.
arXiv admin note: substantial text overlap with arXiv:1807.0576
Computational and Energy Costs of Cryptographic Algorithms on Handheld Devices
Networks are evolving toward a ubiquitous model in which heterogeneous
devices are interconnected. Cryptographic algorithms are required for developing security
solutions that protect network activity. However, the computational and energy limitations
of network devices jeopardize the actual implementation of such mechanisms. In this
paper, we perform a wide analysis on the expenses of launching symmetric and asymmetric
cryptographic algorithms, hash chain functions, elliptic curves cryptography and pairing
based cryptography on personal agendas, and compare them with the costs of basic operating
system functions. Results show that although cryptographic power costs are high and such
operations shall be restricted in time, they are not the main limiting factor of the autonomy
of a device
Criticality Aware Soft Error Mitigation in the Configuration Memory of SRAM based FPGA
Efficient low complexity error correcting code(ECC) is considered as an
effective technique for mitigation of multi-bit upset (MBU) in the
configuration memory(CM)of static random access memory (SRAM) based Field
Programmable Gate Array (FPGA) devices. Traditional multi-bit ECCs have large
overhead and complex decoding circuit to correct adjacent multibit error. In
this work, we propose a simple multi-bit ECC which uses Secure Hash Algorithm
for error detection and parity based two dimensional Erasure Product Code for
error correction. Present error mitigation techniques perform error correction
in the CM without considering the criticality or the execution period of the
tasks allocated in different portion of CM. In most of the cases, error
correction is not done in the right instant, which sometimes either suspends
normal system operation or wastes hardware resources for less critical tasks.
In this paper,we advocate for a dynamic priority-based hardware scheduling
algorithm which chooses the tasks for error correction based on their area,
execution period and criticality. The proposed method has been validated in
terms of overhead due to redundant bits, error correction time and system
reliabilityComment: 6 pages, 8 figures, conferenc
HW/SW Architecture Exploration for an Efficient Implementation of the Secure Hash Algorithm SHA-256
Hash functions are used in the majority of security protocol to guarantee the integrity and the authenticity. Among the most important hash functions is the SHA-2 family, which offers higher security and solved the insecurity problems of other popular algorithms as MD5, SHA-1 and SHA-0. However, theses security algorithms are characterized by a certain amount of complex computations and consume a lot of energy. In order to reduce the power consumption as required in the majority of embedded applications, a solution consists to exploit a critical part on accelerator (hardware). In this paper, we propose a hardware/software exploration for the implementation of SHA256 algorithm. For hardware design, two principal design methods are proceeded: Low level synthesis (LLS) and high level synthesis (HLS). The exploration allows the evaluation of performances in term of area, throughput and power consumption. The synthesis results under Zynq 7000 based-FPGA reflect a significant improvement of about 80% and 15% respectively in FPGA resources and throughput for the LLS hardware design compared to HLS solution. For better efficiency, hardware IPs are deduced and implemented within HW/SW system on chip. The experiments are performed using Xilinx ZC 702-based platform. The HW/SW LLS design records a gain of 10% to 25% in term of execution time and 73% in term of power consumption
Comparative Study of Keccak SHA-3 Implementations
This paper conducts an extensive comparative study of state-of-the-art solutions for im-
plementing the SHA-3 hash function. SHA-3, a pivotal component in modern cryptography, has
spawned numerous implementations across diverse platforms and technologies. This research aims
to provide valuable insights into selecting and optimizing Keccak SHA-3 implementations. Our
study encompasses an in-depth analysis of hardware, software, and software–hardware (hybrid)
solutions. We assess the strengths, weaknesses, and performance metrics of each approach. Critical
factors, including computational efficiency, scalability, and flexibility, are evaluated across differ-
ent use cases. We investigate how each implementation performs in terms of speed and resource
utilization. This research aims to improve the knowledge of cryptographic systems, aiding in the
informed design and deployment of efficient cryptographic solutions. By providing a comprehensive
overview of SHA-3 implementations, this study offers a clear understanding of the available options
and equips professionals and researchers with the necessary insights to make informed decisions in
their cryptographic endeavors
- …