Myoelectric forearm prostheses: State of the art from a user-centered perspective

User acceptance of myoelectric forearm prostheses is currently low. Awkward control, lack of feedback, and difficult training are cited as primary reasons. Recently, researchers have focused on exploiting the new possibilities offered by advancements in prosthetic technology. Alternatively, researchers could focus on prosthesis acceptance by developing functional requirements based on activities users are likely to perform. In this article, we describe the process of determining such requirements and then the application of these requirements to evaluating the state of the art in myoelectric forearm prosthesis research. As part of a needs assessment, a workshop was organized involving clinicians (representing end users), academics, and engineers. The resulting needs included an increased number of functions, lower reaction and execution times, and intuitiveness of both control and feedback systems. Reviewing the state of the art of research in the main prosthetic subsystems (electromyographic [EMG] sensing, control, and feedback) showed that modern research prototypes only partly fulfill the requirements. We found that focus should be on validating EMG-sensing results with patients, improving simultaneous control of wrist movements and grasps, deriving optimal parameters for force and position feedback, and taking into account the psychophysical aspects of feedback, such as intensity perception and spatial acuity

The use of underactuation in prosthetic grasping

Underactuation as a method of driving prosthetic hands has a long history. The pragmatic requirements of such a device to be light enough to be worn and used regularly have meant that any multi degree of freedom prosthetic hand must have fewer actuators than the usable degrees of freedom. Aesthetics ensures that while the hand needs five fingers, five actuators have considerable mass, and only in recent years has it even been possible to construct a practical anthropomorphic hand with five motors. Thus there is an important trade off as to which fingers are driven, and which joints on which fingers are actuated, and how the forces are distributed to create a functional device. This paper outlines some of the historical solutions created for this problem and includes those designs of recent years that are now beginning to be used in the commercial environment. <br><br> <i>This paper was presented at the IFToMM/ASME International Workshop on Underactuated Grasping (UG2010), 19 August 2010, Montréal, Canada.</i&gt

Principal components analysis based control of a multi-dof underactuated prosthetic hand

<p>Abstract</p> <p>Background</p> <p>Functionality, controllability and cosmetics are the key issues to be addressed in order to accomplish a successful functional substitution of the human hand by means of a prosthesis. Not only the prosthesis should duplicate the human hand in shape, functionality, sensorization, perception and sense of body-belonging, but it should also be controlled as the natural one, in the most intuitive and undemanding way. At present, prosthetic hands are controlled by means of non-invasive interfaces based on electromyography (EMG). Driving a multi degrees of freedom (DoF) hand for achieving hand dexterity implies to selectively modulate many different EMG signals in order to make each joint move independently, and this could require significant cognitive effort to the user.</p> <p>Methods</p> <p>A Principal Components Analysis (PCA) based algorithm is used to drive a 16 DoFs underactuated prosthetic hand prototype (called CyberHand) with a two dimensional control input, in order to perform the three prehensile forms mostly used in Activities of Daily Living (ADLs). Such Principal Components set has been derived directly from the artificial hand by collecting its sensory data while performing 50 different grasps, and subsequently used for control.</p> <p>Results</p> <p>Trials have shown that two independent input signals can be successfully used to control the posture of a real robotic hand and that correct grasps (in terms of involved fingers, stability and posture) may be achieved.</p> <p>Conclusions</p> <p>This work demonstrates the effectiveness of a bio-inspired system successfully conjugating the advantages of an underactuated, anthropomorphic hand with a PCA-based control strategy, and opens up promising possibilities for the development of an intuitively controllable hand prosthesis.</p

Design and Fabrication of Soft 3D Printed Actuators: Expanding Soft Robotics Applications

Soft pneumatic actuators are ideal for soft robotic applications due to their innate compliance and high power-weight ratios. Presently, the majority of soft pneumatic actuators are used to create bending motions, with very few able to produce significant linear movements. Fewer can actively produce strains in multiple directions. The further development of these actuators is limited by their fabrication methods, specifically the lack of suitable stretchable materials for 3D printing. In this thesis, a new highly elastic resin for digital light projection 3D printers, designated ElastAMBER, is developed and evaluated, which shows improvements over previously synthesised elastic resins. It is prepared from a di-functional polyether urethane acrylate oligomer and a blend of two different diluent monomers. ElastAMBER exhibits a viscosity of 1000 mPa.s at 40 °C, allowing easy printing at near room temperatures. The 3D-printed components present an elastomeric behaviour with a maximum extension ratio of 4.02 ± 0.06, an ultimate tensile strength of (1.23 ± 0.09) MPa, low hysteresis, and negligible viscoelastic relaxation

Biology and bioinspiration of soft robotics : actuation, sensing, and system integration

Organisms in nature grow with senses, nervous, and actuation systems coordinated in ingenious ways to sustain metabolism and other essential life activities. The understanding of biological structures and functions guide the construction of soft robotics with unprecedented performances. However, despite the progress in soft robotics, there still remains a big gap between man-made soft robotics and natural lives in terms of autonomy, adaptability, self-repair, durability, energy efficiency, etc. Here, the actuation and sensing strategies in the natural biological world are summarized along with their man-made counterparts applied in soft robotics. The development trends of bioinspired soft robotics toward closed loop and embodiment are proposed. Challenges for obtaining autonomous soft robotics similar to natural organisms are outlined to provide a perspective in this field. [Abstract copyright: © 2021.

Advancing the Underactuated Grasping Capabilities of Single Actuator Prosthetic Hands

The last decade has seen significant advancements in upper limb prosthetics, specifically in the myoelectric control and powered prosthetic hand fields, leading to more active and social lifestyles for the upper limb amputee community. Notwithstanding the improvements in complexity and control of myoelectric prosthetic hands, grasping still remains one of the greatest challenges in robotics. Upper-limb amputees continue to prefer more antiquated body-powered or powered hook terminal devices that are favored for their control simplicity, lightweight and low cost; however, these devices are nominally unsightly and lack in grasp variety. The varying drawbacks of both complex myoelectric and simple body-powered devices have led to low adoption rates for all upper limb prostheses by amputees, which includes 35% pediatric and 23% adult rejection for complex devices and 45% pediatric and 26% adult rejection for body-powered devices [1]. My research focuses on progressing the grasping capabilities of prosthetic hands driven by simple control and a single motor, to combine the dexterous functionality of the more complex hands with the intuitive control of the more simplistic body-powered devices with the goal of helping upper limb amputees return to more active and social lifestyles. Optimization of a prosthetic hand driven by a single actuator requires the optimization of many facets of the hand. This includes optimization of the finger kinematics, underactuated mechanisms, geometry, materials and performance when completing activities of daily living. In my dissertation, I will present chapters dedicated to improving these subsystems of single actuator prosthetic hands to better replicate human hand function from simple control. First, I will present a framework created to optimize precision grasping – which is nominally unstable in underactuated configurations – from a single actuator. I will then present several novel mechanisms that allow a single actuator to map to higher degree of freedom motion and multiple commonly used grasp types. I will then discuss how fingerpad geometry and materials can better grasp acquisition and frictional properties within the hand while also providing a method of fabricating lightweight custom prostheses. Last, I will analyze the results of several human subject testing studies to evaluate the optimized hands performance on activities of daily living and compared to other commercially available prosthesis

The Development of a Brain Controlled Robotic Prosthetic Hand

An anthropomorphic, brain controlled, under actuated, Prosthetic hand has been designed and developed for upper extremity amputees. The hands function is based on micro servo actuation and the use of coupling links between parts of the finger. The control of a prosthetic hand is what differentiates this project from the others. It is the intent of this project to increase the sense of belonging between prosthesis and amputee by controlling the designed device by the brain of the amputee. The platform has been designed to use multiple force sensors to improve control. The project is a feasibility study and will be used to test whether a multi-functional and intuitive prosthetic hand is attainable. The control of the hand will be driven through a neural interface and controlled by a micro-board. This paper focuses on the mechanical design of the hand and the processes used to control the hand using signals emitted from the brain, to increase the sense of belonging between the amputee and prosthetic device. The hand has been developed as a foundation for future research into brain controlled prosthetics at the University of Waikato

Bio-Mimetic Smart System Functioning Like Natural Skin and Muscle

Soft machines, or soft robotics, are emerging technologies bringing many exciting prospects for the coming future. Creating soft machines with biomimetic functions is of key importance for applications in bettering human life and creating more complex robotic systems. Various mechanisms have been adopted to mimic natural tactile sense, tough, muscular motion, and even artificial intelligence. Among these, developing a bio-mimetic system capable of self-healing and degradation that behaves like a muscular hydrostat is appealing for soft robotics. This thesis will mainly focus on developing both artificial skin and artificial muscles that can self-heal, be recycled, and function like biological tissue. To develop a biomimetic artificial skin, we adopted an imine-bonded polymer as the main component, and embedded silver nanoparticles as well as liquid metals to create conductive components. Our artificial skin is capable of re-healing and recycling, and can be mounted to a complex 3D surface without introducing damage and strains. Such artificial skin, at the same time, can sense pressure and temperature change, flow across the surface, and humidity change in the atmosphere. Recyclability enables this platform to not only serve as an artificial skin, but also for other electronics applications. The artificial muscles were also developed for this project based on a recently invented Liquid Crystal Elastomer, whose behavior is most similar to that of natural muscles. To achieve large actuation strains, a fast response, and small scale local controlling, a Liquid Metal was introduced for stimulating the artificial muscle. Over 100% linear contracting strain was realized based on such a combination, which is greater than that of natural muscles. Bending and twisting deformation were also realized easily on such system. To further demonstrate the advantages of our artificial muscle, we integrated it into other passive soft elastomers like Ecoflex to mimic the camouflage behavior of cephalopods

Design of an affordable anthropomorphic mechanical prosthetic hand

Includes bibliographical references.This dissertation outlines the conceptualisation, design, manufacture, assembly and experimental testing of an affordable anthropomorphic mechanical hand prosthesis. In many countries, upper-limb amputees lack access to prosthetic hand devices. Furthermore, currently available mechanical devices require a large amount of effort to actuate; fatiguing and frustrating patients who have no other alternative but to use them. Consequently, a need has arisen to provide a mechanical device that is affordable enough to be accessible to low and middle-income patients, is functional enough to allow users to easily perform their Activities of Daily Living (ADLs), and is aesthetically appealing enough to ensure that patients feel comfortable and confident when wearing it. Concept solutions of several mechanisms were identified and evaluated from which the final design was selected. Analytical force analysis was used to generate a mathematical model to analyse the response of each dynamic member in the hand. A linear relationship between the input-force and applied grasp-forces of the hand was identified. Finite Element Analysis (FEA) used to investigate the lateral and hyperextensive loading limits of the phalanges, generated results that corresponded well to the experimental outcomes. Amongst the utilised actuation mechanisms (levers, pulleys, tendon-wires, bearings and springs), the tendon-wires were of concern due to their repetitive tensile loading and relative movement with the phalanges. Tensile testing of various tendon-wires and endurance testing of the phalangeal tendon-channels, yielded a combination which surpassed the infinite life requirement of 1,200,000 loading cycles; with carbon-nylon contact wearing at the lowest rate as confirmed by gravimetric tests in accordance with ASTM F2025 (2000). Manufacture of the hand used rapid prototyping in combination with traditional machining methods and standard components, enabling a fully-assembled cost of R 11,628.37; below the required R 18,000 limit. Various power and precision grasping configurations were achieved and the contact forces satisfactorily maintained, using the hand’s built-in locking mechanism. Feedback gathered from the prosthetist and patients suggested making slight alterations to the hand’s aesthetics and to address minor functional challenges, such as the control of the closing trajectory for precision grasps