Research in software allocation for advanced manned mission communications and tracking systems

An assessment of the planned processing hardware and software/firmware for the Communications and Tracking System of the Space Station Freedom (SSF) was performed. The intent of the assessment was to determine the optimum distribution of software/firmware in the processing hardware for maximum throughput with minimum required memory. As a product of the assessment process an assessment methodology was to be developed that could be used for similar assessments of future manned spacecraft system designs. The assessment process was hampered by changing requirements for the Space Station. As a result, the initial objective of determining the optimum software/firmware allocation was not fulfilled, but several useful conclusions and recommendations resulted from the assessment. It was concluded that the assessment process would not be completely successful for a system with changing requirements. It was also concluded that memory requirements and hardware requirements were being modified to fit as a consequence of the change process, and although throughput could not be quantitized, potential problem areas could be identified. Finally, inherent flexibility of the system design was essential for the success of a system design with changing requirements. Recommendations resulting from the assessment included development of common software for some embedded controller functions, reduction of embedded processor requirements by hardwiring some Orbital Replacement Units (ORUs) to make better use of processor capabilities, and improvement in communications between software development personnel to enhance the integration process. Lastly, a critical observation was made regarding the software integration tasks did not appear to be addressed in the design process to the degree necessary for successful satisfaction of the system requirements

Basic hardware interconnection mechanisms for building multiple microcomputer systems

This report presents the current results of a research project which has been concerned with methods for designing and implementing multiple microcomputer systems. The design method is based upon identifying hardware interconnection primitives which may be used to construct the interconnection subsystem which characterizes a given multicomputer architecture. An actual experimental system has been constructed which will permit building nine of ten systems in the Anderson and Jensen architecture taxonomy. (Author)Supported in part by the Department of Electrical Engineering and Computer Science, University of Connecticut, Storrs, Connecticut and in part by the Department of Computer Science, Naval Postgraduate School, Monterey, Californiahttp://archive.org/details/basichardwareint00careNAApproved for public release; distribution is unlimited

Satellite Power Systems (SPS) concept definition study. Volume 5: Special emphasis studies

Satellite configurations based on the Satellite Power System baseline requirements were analyzed and a preferred concept selected. A satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Rectenna construction requirement were also addressed. Mass flow to orbit requirements were revised and traffic models established based on construction of 60 instead of 120 satellites. Analyses were conducted to determine satellite control, resources, manufacturing, and propellant requirements. The impact of the laser beam used for space-to-Earth power transmission upon the intervening atmosphere was examined as well as the inverse effect. The significant space environments and their effects on spacecraft components were investigated to define the design and operational limits imposed by the environments on an orbit transfer vehicle. The results show that LEO altitude 300 nmi and transfer orbit duration 6 months are preferrable

Within-Die Delay Variation Measurement And Analysis For Emerging Technologies Using An Embedded Test Structure

Both random and systematic within-die process variations (PV) are growing more severe with shrinking geometries and increasing die size. Escalation in the variations in delay and power with reductions in feature size places higher demands on the accuracy of variation models. Their availability can be used to improve yield, and the corresponding profitability and product quality of the fabricated integrated circuits (ICs). Sources of within-die variations include optical source limitations, and layout-based systematic effects (pitch, line-width variability, and microscopic etch loading). Unfortunately, accurate models of within-die PVs are becoming more difficult to derive because of their increasingly sensitivity to design-context. Embedded test structures (ETS) continue to play an important role in the development of models of PVs and as a mechanism to improve correlations between hardware and models. Variations in path delays are increasing with scaling, and are increasingly affected by neighborhood\u27 interactions. In order to fully characterize within-die variations, delays must be measured in the context of actual core-logic macros. Doing so requires the use of an embedded test structure, as opposed to traditional scribe line test structures such as ring oscillators (RO). Accurate measurements of within-die variations can be used, e.g., to better tune models to actual hardware (model-to-hardware correlations). In this research project, I propose an embedded test structure called REBEL (Regional dELay BEhavior) that is designed to measure path delays in a minimally invasive fashion; and its architecture measures the path delays more accurately. Design for manufacture-ability (DFM) analysis is done on the on 90 nm ASIC chips and 28nm Zynq 7000 series FPGA boards. I present ASIC results on within-die path delay variations in a floating-point unit (FPU) fabricated in IBM\u27s 90 nm technology, with 5 pipeline stages, used as a test vehicle in chip experiments carried out at nine different temperature/voltage (TV) corners. Also experimental data has been analyzed for path delay variations in short vs long paths. FPGA results on within-die variation and die-to-die variations on Advanced Encryption System (AES) using single pipelined stage are also presented. Other analysis that have been performed on the calibrated path delays are Flip Flop propagation delays for both rising and falling edge (tpHL and tpLH), uncertainty analysis, path distribution analysis, short versus long path variations and mid-length path within-die variation. I also analyze the impact on delay when the chips are subjected to industrial-level temperature and voltage variations. From the experimental results, it has been established that the proposed REBEL provides capabilities similar to an off-chip logic analyzer, i.e., it is able to capture the temporal behavior of the signal over time, including any static and dynamic hazards that may occur on the tested path. The ASIC results further show that path delays are correlated to the launch-capture (LC) interval used to time them. Therefore, calibration as proposed in this work must be carried out in order to obtain an accurate analysis of within-die variations. Results on ASIC chips show that short paths can vary up to 35% on average, while long paths vary up to 20% at nominal temperature and voltage. A similar trend occurs for within-die variations of mid-length paths where magnitudes reduced to 20% and 5%, respectively. The magnitude of delay variations in both these analyses increase as temperature and voltage are changed to increase performance. The high level of within-die delay variations are undesirable from a design perspective, but they represent a rich source of entropy for applications that make use of \u27secrets\u27 such as authentication, hardware metering and encryption. Physical unclonable functions (PUFs) are a class of primitives that leverage within-die-variations as a means of generating random bit strings for these types of applications, including hardware security and trust. Zynq FPGAs Die-to-Die and within-die variation study shows that on average there is 5% of within-Die variation and the range of die-to-Die variation can go upto 3ns. The die-to-Die variations can be explored in much further detail to study the variations spatial dependance. Additionally, I also carried out research in the area data mining to cater for big data by focusing the work on decision tree classification (DTC) to speed-up the classification step in hardware implementation. For this purpose, I devised a pipelined architecture for the implementation of axis parallel binary decision tree classification for meeting up with the requirements of execution time and minimal resource usage in terms of area. The motivation for this work is that analyzing larger data-sets have created abundant opportunities for algorithmic and architectural developments, and data-mining innovations, thus creating a great demand for faster execution of these algorithms, leading towards improving execution time and resource utilization. Decision trees (DT) have since been implemented in software programs. Though, the software implementation of DTC is highly accurate, the execution times and the resource utilization still require improvement to meet the computational demands in the ever growing industry. On the other hand, hardware implementation of DT has not been thoroughly investigated or reported in detail. Therefore, I propose a hardware acceleration of pipelined architecture that incorporates the parallel approach in acquiring the data by having parallel engines working on different partitions of data independently. Also, each engine is processing the data in a pipelined fashion to utilize the resources more efficiently and reduce the time for processing all the data records/tuples. Experimental results show that our proposed hardware acceleration of classification algorithms has increased throughput, by reducing the number of clock cycles required to process the data and generate the results, and it requires minimal resources hence it is area efficient. This architecture also enables algorithms to scale with increasingly large and complex data sets. We developed the DTC algorithm in detail and explored techniques for adapting it to a hardware implementation successfully. This system is 3.5 times faster than the existing hardware implementation of classification.\u2

Distributed simulation of power systems using real time digital simulator

The simulation of power system behavior, especially transient behavior, helps us in the analysis and planning of various power systems. However, power systems are usually highly complex and geographically distributed. Therefore system partitioning can be used to allow for sharing resources in simulation. In this work, distributed simulations of power system models have been developed using an electromagnetic transient simulator, namely Real Time Digital Simulator (RTDS). The goal is to demonstrate and assess the feasibility of both non-real-time and real-time simulations using the RTDS in a geographically distributed scenario. Different protocols and options used in the communication between power systems have been studied and analyzed. In this work, a test bed has been developed for data transfer between a power system simulated in RTDS at Mississippi State University and the power system simulated in RTDS at Texas A&M University. Different protocols, available for the interface and communication in the RTDS, have been studied and applied in this work. Finally, a locally distributed wide area control test bed was developed and simulated

lLTZVisor: a lightweight TrustZone-assisted hypervisor for low-end ARM devices

Dissertação de mestrado em Engenharia Eletrónica Industrial e ComputadoresVirtualization is a well-established technology in the server and desktop space and has recently been spreading across different embedded industries. Facing multiple challenges derived by the advent of the Internet of Things (IoT) era, these industries are driven by an upgrowing interest in consolidating and isolating multiple environments with mixed-criticality features, to address the complex IoT application landscape. Even though this is true for majority mid- to high-end embedded applications, low-end systems still present little to no solutions proposed so far. TrustZone technology, designed by ARM to improve security on its processors, was adopted really well in the embedded market. As such, the research community became active in exploring other TrustZone’s capacities for isolation, like an alternative form of system virtualization. The lightweight TrustZone-assisted hypervisor (LTZVisor), that mainly targets the consolidation of mixed-criticality systems on the same hardware platform, is one design example that takes advantage of TrustZone technology for ARM application processors. With the recent introduction of this technology to the new generation of ARM microcontrollers, an opportunity to expand this breakthrough form of virtualization to low-end devices arose. This work proposes the development of the lLTZVisor hypervisor, a refactored LTZVisor version that aims to provide strong isolation on resource-constrained devices, while achieving a low-memory footprint, determinism and high efficiency. The key for this is to implement a minimal, reliable, secure and predictable virtualization layer, supported by the TrustZone technology present on the newest generation of ARM microcontrollers (Cortex-M23/33).Virtualização é uma tecnologia já bem estabelecida no âmbito de servidores e computadores pessoais que recentemente tem vindo a espalhar-se através de várias indústrias de sistemas embebidos. Face aos desafios provenientes do surgimento da era Internet of Things (IoT), estas indústrias são guiadas pelo crescimento do interesse em consolidar e isolar múltiplos sistemas com diferentes níveis de criticidade, para atender ao atual e complexo cenário aplicativo IoT. Apesar de isto se aplicar à maioria de aplicações embebidas de média e alta gama, sistemas de baixa gama apresentam-se ainda com poucas soluções propostas. A tecnologia TrustZone, desenvolvida pela ARM de forma a melhorar a segurança nos seus processadores, foi adoptada muito bem pelo mercado dos sistemas embebidos. Como tal, a comunidade científica começou a explorar outras aplicações da tecnologia TrustZone para isolamento, como uma forma alternativa de virtualização de sistemas. O "lightweight TrustZone-assisted hypervisor (LTZVisor)", que tem sobretudo como fim a consolidação de sistemas de criticidade mista na mesma plataforma de hardware, é um exemplo que tira vantagem da tecnologia TrustZone para os processadores ARM de alta gama. Com a recente introdução desta tecnologia para a nova geração de microcontroladores ARM, surgiu uma oportunidade para expandir esta forma inovadora de virtualização para dispositivos de baixa gama. Este trabalho propõe o desenvolvimento do hipervisor lLTZVisor, uma versão reestruturada do LTZVisor que visa em proporcionar um forte isolamento em dispositivos com recursos restritos, simultâneamente atingindo um baixo footprint de memória, determinismo e alta eficiência. A chave para isto está na implementação de uma camada de virtualização mínima, fiável, segura e previsível, potencializada pela tecnologia TrustZone presente na mais recente geração de microcontroladores ARM (Cortex-M23/33)

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 5: Special emphasis studies

Specific areas were analyzed and identified as high priority for more in-depth analysis. These areas were: (1) rectenna constructability; (2) satellite constructability; (3) support systems constructability; (4) space environmental analysis, and (5) special end-to-end analyses. Baseline requirements specified coplanar solar blankets and an end mounted antenna, utilizing either GaAlAs solar cells and employing a CR of 2, or Si cells. Several configurations were analyzed. Utilizing the preferred configuration as a baseline, a satellite construction base was defined, precursor operations incident to establishment of orbital support facilities identified, and the satellite construction sequence and procedures developed. Since the baseline specifies sixty instead of one hundred and twenty satellites to be constructed in a thirty year period, mass flow to orbit requirements were revised and new traffic models established. Launch site requirements (exclusive of actual launch operations) in terms of manpower and building space were defined