Ultra-Low Leakage, Energy-Efficient Digital Integrated Circuit and System Design

The advances of the complementary metal-oxide-semiconductor (CMOS) technology manufacturing and design over the years have enabled a diverse range of applications across the power consumption, performance, and area (PPA) spectra. Many of the recent and prospective applications rely on the availability of energy-autonomous, miniaturized systems, i.e., ultra-low power (ULP) VLSI systems, which are generally characterized by extreme resource limitations. Some examples of applications are wireless sensing platforms, body-area sensor networks (BASN), biomedical and implantable devices, wearables, hearables, and monitors. Within the context of such applications, the key requirements are long lifetime and miniaturized size (sub-/millimeter-scale). In order to enable both requirements, energy-efficiency is the key metric. It allows for extended battery lifetime and operation with the energy that can be harvested from the environment, and it limits the size (volume) of the energy sources utilized to power these systems. Ultra-low voltage (ULV) operation is a key technique in which the VDD of circuits is reduced from nominal to near or below the threshold voltage of the transistor. It is a powerful knob that has been largely exploited by designers in order to achieve ultra-low power consumption and high energy-efficiency in CMOS. Existing ULP VLSI systems typically operate at a lower supply voltage thereby reducing their energy consumption by one to two orders of magnitude in order to enable the aforementioned applications. While supply voltage scaling is a promising measure for achieving low power and reducing energy consumption, it brings up several challenges. One critical issue is the leakage energy dissipated by the devices, which is magnified in portion to the total energy consumption at ULV. The reason is that, as VDD scales from nominal to near-threshold and sub-threshold, transistors become increasingly slower and they accumulate more leakage (i.e., static) power over longer cycle times. This energy waste accounts for a significant portion of the system's total energy consumption, offsets the gains provided by voltage scaling, defines the minimum energy per operation, and poses a practical limit for the system's energy-efficiency. This thesis presents selected research works on ultra-low leakage, energy-efficient digital integrated circuit design. More specifically, it describes novel and key techniques for minimizing the energy waste of idle/underutilized and always-on hardware. The main goal of such techniques is to push the envelope of energy-efficiency in energy-autonomous, miniaturized VLSI systems. Such techniques are applied to key building blocks of emerging mobile and embedded computing devices resulting in state-of-the-art energy-efficiencies

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

Leakage Power Reduction for Deeply-Scaled FinFET Circuits Operating in Multiple Voltage Regimes Using Fine-Grained Gate- Length Biasing Technique

Abstract-With the aggressive downscaling of the process technologies and importance of battery-powered systems, reducing leakage power consumption has become one of the most crucial design challenges for IC designers. This paper presents a devicecircuit cross-layer framework to utilize fine-grained gate-length biased FinFETs for circuit leakage power reduction in the near-and super-threshold operation regimes. The impacts of Gate-Length Biasing (GLB) on circuit speed and leakage power are first studied using one of the most advanced technology nodes -a 7nm FinFET technology. Then multiple standard cell libraries using different leakage reduction techniques, such as GLB and Dual-VT, are built in multiple operating regimes at this technology node. It is demonstrated that, compared to Dual-VT, GLB is a more suitable technique for the advanced 7nm FinFET technology due to its capability of delivering a finer-grained trade-off between the leakage power and circuit speed, not to mention the lower manufacturing cost. The circuit synthesis results of a variety of ISCAS benchmark circuits using the presented GLB 7nm FinFET cell libraries show up to 70% leakage improvement with zero degradation in circuit speed in the near-and super-threshold regimes, respectively, compared to the standard 7nm FinFET cell library

Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

FDSOI Design using Automated Standard-Cell-Grained Body Biasing

With the introduction of FDSOI processes at competitive technology nodes, body biasing on an unprecedented scale was made possible. Body biasing influences one of the central transistor characteristics, the threshold voltage. By being able to heighten or lower threshold voltage by more than 100mV, the very physics of transistor switching can be manipulated at run time. Furthermore, as body biasing does not lead to different signal levels, it can be applied much more fine-grained than, e.g., DVFS. With the state of the art mainly focused on combinations of body biasing with DVFS, it has thus ignored granularities unfeasible for DVFS. This thesis fills this gap by proposing body bias domain partitioning techniques and for body bias domain partitionings thereby generated, algorithms that search for body bias assignments. Several different granularities ranging from entire cores to small groups of standard cells were examined using two principal approaches: Designer aided pre-partitioning based determination of body bias domains and a first-time, fully automatized, netlist based approach called domain candidate exploration. Both approaches operate along the lines of activation and timing of standard cell groups. These approaches were evaluated using the example of a Dynamically Reconfigurable Processor (DRP), a highly efficient category of reconfigurable architectures which consists of an array of processing elements and thus offers many opportunities for generalization towards many-core architectures. Finally, the proposed methods were validated by manufacturing a test-chip. Extensive simulation runs as well as the test-chip evaluation showed the validity of the proposed methods and indicated substantial improvements in energy efficiency compared to the state of the art. These improvements were accomplished by the fine-grained partitioning of the DRP design. This method allowed reducing dynamic power through supply voltage levels yielding higher clock frequencies using forward body biasing, while simultaneously reducing static power consumption in unused parts.Die Einführung von FDSOI Prozessen in gegenwärtigen Prozessgrößen ermöglichte die Nutzung von Substratvorspannung in nie zuvor dagewesenem Umfang. Substratvorspannung beeinflusst unter anderem eine zentrale Eigenschaft von Transistoren, die Schwellspannung. Mittels Substratvorspannung kann diese um mehr als 100mV erhöht oder gesenkt werden, was es ermöglicht, die schiere Physik des Schaltvorgangs zu manipulieren. Da weiterhin hiervon der Signalpegel der digitalen Signale unberührt bleibt, kann diese Technik auch in feineren Granularitäten angewendet werden, als z.B. Dynamische Spannungs- und Frequenz Anpassung (Engl. Dynamic Voltage and Frequency Scaling, Abk. DVFS). Da jedoch der Stand der Technik Substratvorspannung hauptsächlich in Kombinationen mit DVFS anwendet, werden feinere Granularitäten, welche für DVFS nicht mehr wirtschaftlich realisierbar sind, nicht berücksichtigt. Die vorliegende Arbeit schließt diese Lücke, indem sie Partitionierungsalgorithmen zur Unterteilung eines Entwurfs in Substratvorspannungsdomänen vorschlägt und für diese hierdurch unterteilten Domänen entsprechende Substratvorspannungen berechnet. Hierzu wurden verschiedene Granularitäten berücksichtigt, von ganzen Prozessorkernen bis hin zu kleinen Gruppen von Standardzellen. Diese Entwürfe wurden dann mit zwei verschiedenen Herangehensweisen unterteilt: Chipdesigner unterstützte, vorpartitionierungsbasierte Bestimmung von Substratvorspannungsdomänen, sowie ein erstmals vollautomatisierter, Netzlisten basierter Ansatz, in dieser Arbeit Domänen Kandidaten Exploration genannt. Beide Ansätze funktionieren nach dem Prinzip der Aktivierung, d.h. zu welchem Zeitpunkt welcher Teil des Entwurfs aktiv ist, sowie der Signallaufzeit durch die entsprechenden Entwurfsteile. Diese Ansätze wurden anhand des Beispiels Dynamisch Rekonfigurierbarer Prozessoren (DRP) evaluiert. DRPs stellen eine Klasse hocheffizienter rekonfigurierbarer Architekturen dar, welche hauptsächlich aus einem Feld von Rechenelementen besteht und dadurch auch zahlreiche Möglichkeiten zur Verallgemeinerung hinsichtlich Many-Core Architekturen zulässt. Schließlich wurden die vorgeschlagenen Methoden in einem Testchip validiert. Alle ermittelten Ergebnisse zeigen im Vergleich zum Stand der Technik drastische Verbesserungen der Energieeffizienz, welche durch die feingranulare Unterteilung in Substratvorspannungsdomänen erzielt wurde. Hierdurch konnten durch die Anwendung von Substratvorspannung höhere Taktfrequenzen bei gleicher Versorgungsspannung erzielt werden, während zeitgleich in zeitlich unkritischen oder ungenutzten Entwurfsteilen die statische Leistungsaufnahme minimiert wurde

Design and Analysis of an Asynchronous Microcontroller

This dissertation presents the design of the most complex MTNCL circuit to date. A fully functional MTNCL MSP430 microcontroller is designed and benchmarked against an open source synchronous MSP430. The designs are compared in terms of area, active energy, and leakage energy. Techniques to reduce MTNCL pipeline activity and improve MTNCL register file area and power consumption are introduced. The results show the MTNCL design to have superior leakage power characteristics. The area and active energy comparisons highlight the need for better MTNCL logic synthesis techniques

Ultra-Low Power and Radiation Hardened Asynchronous Circuit Design

This dissertation proposes an ultra-low power design methodology called bit-wise MTNCL for bit-wise pipelined asynchronous circuits, which combines multi-threshold CMOS (MTCMOS) with bit-wise pipelined NULL Convention Logic (NCL) systems. It provides the leakage power advantages of an all high-Vt implementation with a reasonable speed penalty compared to the all low-Vt implementation, and has negligible area overhead. It was enhanced to handle indeterminate standby states. The original MTNCL concept was enhanced significantly by sleeping Registers and Completion Logic as well as Combinational circuits to reduce area, leakage power, and energy per operation. This dissertation also develops an architecture that allows NCL circuits to recover from a Single Event Upset (SEU) or Single Event Latchup (SEL) fault without any data loss. Finally, an accurate throughput derivation formula for pipelined NCL circuits was developed, which can be used for static timing analysis