Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

Reconfigurable Monopole Antennas With Circular Polarization

This thesis presents research on printed circularly-polarized monopole antennas and their application in reconfigurable monopole antennas. The proposed circularly-polarised monopole antennas benefit from advantages such as small size, low-cost, low-profile and simple designs. The first part of this thesis introduces three printed circularly-polarized monopole antennas for global navigation satellite systems and Wi-Fi applications. The primary focus is on the ground plane which is used as a radiating component in realizing circular-polarization. It is shown that by employing the ground plane as a radiator results in a wide axial ratio bandwidth. The radiation patterns of the antennas and their relationship with antenna ground plane sizes is investigated. Then, a frequency-reconfigurable monopole antenna with circular-polarization for wireless local area networks and global navigation satellite systems is presented. The ground plane current distribution, rearranged by a switch, enables the right-hand circularly-polarized band to move in frequency from the GPS band to Wi-Fi frequency bands. Finally, a simple polarization reconfigurable printed monopole antenna for wireless applications is described. Once again, with the help of the ground plane and by changing its current distribution, linear-polarization, right-hand or left-hand circular-polarization is realized. The polarization agility is controlled by two PIN diodes, which alter the ground plane surface currents. The antenna is one of the few polarization-reconfigurable monopole antennas reported in the literature. For all the presented antennas, parametric studies of key geometric parameters are given for clear understanding of the circular-polarization radiation mechanism

A novel SWB antenna with triple band-notches based on elliptical slot and rectangular split ring resonators

In this paper, a wideband antenna was designed for super-wideband (SWB) applications. The proposed antenna was fed with a rectangular tapered microstrip feed line, which operated over a SWB frequency range (1.42 GHz to 50 GHz). The antenna was implemented at a compact size with electrical dimensions of 0.16 ¿ × 0.27 ¿ × 0.0047 ¿ mm3, where ¿ was with respect to the lowest resonance frequency. The proposed antenna prototype was fabricated on a F4B substrate, which had a permittivity of 2.65 and 1 mm thickness. The SWB antenna exhibited an impedance bandwidth of 189% and a bandwidth ratio of 35.2:1. Additionally, the proposed antenna design exhibited three band notch characteristics that were necessary to eradicate interference from WLAN, WiMAX, and X bands in the SWB range. One notch was achieved by etching an elliptical split ring resonator (ESRR) in the radiator and the other two notches were achieved by placing rectangular split ring resonators close to the signal line. The first notch was tuned by incorporating a varactor diode into the ESRR. The prototype was experimentally validated with, with notch and without notch characteristics for SWB applications. The experimental results showed good agreement with simulated results.Postprint (published version

A Printed Triangular Monopole with Wideband Circular Polarization

A printed triangular monopole antenna with wideband circular polarization is presented. The wideband circular polarization is achieved by asymmetrical excitation of a triangular ground plane and planar triangular monopole. The combined radiation provides a wide axial-ratio bandwidth spanning from 1.42 to 2.7 GHz (62%). A parametric study of key geometric parameters is given for clear understanding of the radiation mechanism

Ultra-Wideband Antenna

No abstract available