Kinematics and Robot Design IV, KaRD2021

This volume collects the papers published on the special issue “Kinematics and Robot Design IV, KaRD2021” (https://www.mdpi.com/journal/robotics/special_issues/KaRD2021), which is the forth edition of the KaRD special-issue series, hosted by the open-access journal “MDPI Robotics”. KaRD series is an open environment where researchers can present their works and discuss all the topics focused on the many aspects that involve kinematics in the design of robotic/automatic systems. Kinematics is so intimately related to the design of robotic/automatic systems that the admitted topics of the KaRD series practically cover all the subjects normally present in well-established international conferences on “mechanisms and robotics”. KaRD2021, after the peer-review process, accepted 12 papers. The accepted papers cover some theoretical and many design/applicative aspects

Robotic exoskeleton with an assist-as-needed control strategy for gait rehabilitation after stroke

Stroke is a loss of brain function caused by a disturbance on the blood supply to the brain. The main consequence of a stroke is a serious long-term disability, and it affects millions of people around the world every year. Motor recovery after stroke is primarily based on physical therapy and the most common rehabilitation method focuses on the task specific approach. Gait is one of the most important daily life activity affected in stroke victims, leading to poor ambulatory activity. Therefore, much effort has been devoted to improve gait rehabilitation. Traditional gait therapy is mostly based on treadmill training, with patient’s body weight partially supported by a harness system. Physical therapists need to manually assist patients in the correct way to move their legs. However, this technique is usually very exhausting for therapists and, as a result, the training duration is limited by the physical conditions of the therapists themselves. Moreover, multiple therapists are required to assist a single patient on both legs, and it is very difficult to coordinate and properly control the body segments of interest. In order to help physical therapists to improve the rehabilitation process, robotic exoskeletons can come into play. Robotics exoskeletons consist of mechatronic structures attached to subject’s limbs in order to assist or enhance movements. These robotic devices have emerged as a promising approach to restore gait and improve motor function of impaired stroke victims, by applying intensive and repetitive training. However, active subject participation during the therapy is paramount to many of the potential recovery pathways and, therefore, it is an important feature of the gait training. To this end, robotics devices should not impose fixed limb trajectories while patient remains passive. These have been the main motivations for the research of this dissertation. The overall aim was to generate the necessary knowledge to design, develop and validate a novel lower limb robotic exoskeleton and an assist-as-needed therapy for gait rehabilitation in post-stroke patients. Research activities were conducted towards the development of the hardware and the control methods required to prove the concept with a clinical evaluation. The first part of the research was dedicated to design and implement a lightweight robotic exoskeleton with a comfortable embodiment to the user. It was envisioned as a completely actuated device in the sagittal plane, capable of providing the necessary torque to move the hip, knee and ankle joints through the walking process. The device, that does not extend above mid-abdomen and requires nothing to be worn over the shoulders or above the lower back, presumably renders more comfort to the user. Furthermore, the robotic exoskeleton is an autonomous device capable of overground walking, aiming to motivate and engage patients by performing gait rehabilitation in a real environment. The second research part was devoted to implement a control approach that assist the patient only when needed. This method creates a force field that guides patient’s limb in a correct trajectory. In this way, the robotic exoskeleton only applies forces when the patient deviates from the trajectory. The force field provides haptic feedback that is processed by the patient, thus leading to a continuous improvement of the motor functions. Finally, research was conducted to evaluate the robotic exoskeleton and its control approach in a clinical study with post-stroke patients. This study aimed to be a proof-of-concept of all design and implementation applied to a real clinical rehabilitation scenario. Several aspects were evaluated: the robotic exoskeleton control performance, patients’ attitudes and motivation towards the use of the device, patients’ safety and tolerance to the intensive robotic training and the impact of the robotic training on the walking function of the patients. Results have shown that the device is safe, easy to use and have positive impact on walking functions. The patients tolerated the walking therapy very well and were motivated by training with the device. These results motivate further research on overground walking therapy for stroke rehabilitation with the robotic exoskeleton. The work presented in this dissertation comprises all the way from the research to implementation and evaluation of a final device. The technology resulting from the work presented here has been transferred to a spin-o↵ company, which is now commercializing the device in different countries as a research tool to be used in clinical studies.Un accidente cerebrovascular es una pérdida de la función cerebral causada por una perturbación en el suministro sanguíneo al cerebro. La principal consecuencia de esta enfermedad es una grave discapacidad a largo plazo, que afecta a millones de personas en todo el mundo a cada año. La recuperación motora después de un accidente cerebrovascular se basa principalmente en la terapia física, y el método de rehabilitación más frecuente se centra en un entrenamiento específico. La marcha es una de las más importantes actividades de la vida diaria afectada por un accidente cerebrovascular, conduciendo a una capacidad ambulatoria deficiente. Debido a eso, mucho esfuerzo se ha dedicado a la rehabilitación de la marcha. La terapia tradicional de la marcha se basa principalmente en el entrenamiento en cinta rodante, con descarga de peso parcial usando un sistema de arnés. Los fisioterapeutas ayudan manualmente a los pacientes a mover sus piernas en la forma correcta. Sin embargo, esta técnica suele ser muy extenuante para los terapeutas, limitando la duración de la terapia por las condiciones físicas de estos. Además, se requieren múltiples terapeutas para asistir a un solo paciente en ambas piernas, siendo muy difícil de coordinar y controlar adecuadamente los segmentos corporales de interés. Con el fin de ayudar a los terapeutas físicos a mejorar el proceso de rehabilitación, los exosqueletos robóticos pueden ser muy útiles. Los exoesqueletos robóticos consisten en estructuras mecatrónicas conectadas a las extremidades del usuario, con el fin de asistir sus movimientos. Estos dispositivos robóticos han surgido como una forma prometedora de restaurar la marcha y mejorar la función motora en víctimas de accidentes cerebrovasculares, aplicando un entrenamiento intensivo y repetitivo. Sin embargo, la participación activa del paciente en la terapia es primordial para muchas de las posibles vías de recuperación y, por lo tanto, es una característica importante del entrenamiento de la marcha. Para este fin, los dispositivos robóticos no deben imponer trayectorias fijas en las extremidades del paciente mientras este permanece pasivo. Estos desafíos en los procesos de rehabilitación han sido la principal motivación para la investigación en esta tesis doctoral. El objetivo principal es generar los conocimientos necesarios para diseñar, desarrollar y validar un exoesqueleto robótico y una terapia de asistencia bajo demanda para la rehabilitación de la marcha en pacientes tras un accidente cerebrovascular. Actividades de investigación fueron llevadas a cabo para el desarrollo del hardware y de los métodos de control necesarios para una prueba de concepto mediante una evaluación clínica. La primera parte de la investigación fue dedicada a diseñar e implementar un exoesqueleto robótico ligero y cómodo para el usuario. Fue concebido un dispositivo completamente actuado en el plano sagital, capaz de proporcionar el par necesario para mover las articulaciones de la cadera, rodilla y tobillo durante la marcha. El dispositivo no se extiende por encima de mitad del abdomen y no requiere llevar nada sobre los hombros o en el tronco, proporcionando más comodidad al usuario. Además, el exoesqueleto robótico es un dispositivo autónomo capaz de asistir marcha ambulatoria, con el objetivo de motivar a los pacientes por medio de rehabilitación en un entorno real. La segunda parte de la investigación fue dedicada a implementar una estrategia de control para ayudar al paciente bajo demanda. El método crea un campo de fuerzas que guía la extremidad del paciente en la trayectoria correcta. De esta manera, el exoesqueleto robótico sólo aplica fuerzas cuando el paciente se desvía de la trayectoria. El campo de fuerza proporciona retroalimentación háptica que es procesada por el paciente, lo que conduce a una mejora continua de las funciones motoras. Por último, fue llevada a cabo una investigación para evaluar el exoesqueleto robótico y su estrategia de control en un estudio clínico con pacientes que han sufrido un accidente cerebrovascular. Este estudio fue una prueba de concepto del diseño y de la implementación del dispositivo aplicada a un escenario de rehabilitación clínica real. Se evaluaron varios aspectos: el desempeño de la estrategia de control, las actitudes y motivación de los pacientes hacia el uso del dispositivo, la seguridad del paciente y su tolerancia a la terapia robótica intensiva y el impacto de la rehabilitación en la marcha de los pacientes. Los resultados han demostrado que el dispositivo es seguro, fácil de usar y tiene un impacto positivo en la marcha. Los pacientes toleraron la terapia robótica muy bien y estuvieron motivados por el entrenamiento con el dispositivo. Estos resultados motivan a seguir la investigación con el exoesqueleto robótico aplicado a la rehabilitación de marcha en pacientes que han sufrido un accidente cerebrovascular. El trabajo presentado en esta tesis doctoral comprende todo el camino desde la investigación hasta la ejecución y evaluación de un dispositivo terminado. La tecnología resultante del trabajo que aquí se presenta ha sido transferida a una empresa spin-off, que ahora está comercializando el dispositivo en diferentes países como una herramienta de investigación para ser utilizada en estudios clínicos.Programa Oficial de Doctorado en Ingeniería Eléctrica, Electrónica y AutomáticaPresidente: Luís Enrique Moreno Lorente.-Secretario: Juan Aranda López.-Vocal: Jose María Azorín Poved

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, held in Hamburg, Germany, in May 2022. The 36 regular papers included in this book were carefully reviewed and selected from 129 submissions. They were organized in topical sections as follows: haptic science; haptic technology; and haptic applications

Mechatronic Systems

Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools

Evaluating footwear “in the wild”: Examining wrap and lace trail shoe closures during trail running

Trail running participation has grown over the last two decades. As a result, there have been an increasing number of studies examining the sport. Despite these increases, there is a lack of understanding regarding the effects of footwear on trail running biomechanics in ecologically valid conditions. The purpose of our study was to evaluate how a Wrap vs. Lace closure (on the same shoe) impacts running biomechanics on a trail. Thirty subjects ran a trail loop in each shoe while wearing a global positioning system (GPS) watch, heart rate monitor, inertial measurement units (IMUs), and plantar pressure insoles. The Wrap closure reduced peak foot eversion velocity (measured via IMU), which has been associated with fit. The Wrap closure also increased heel contact area, which is also associated with fit. This increase may be associated with the subjective preference for the Wrap. Lastly, runners had a small but significant increase in running speed in the Wrap shoe with no differences in heart rate nor subjective exertion. In total, the Wrap closure fit better than the Lace closure on a variety of terrain. This study demonstrates the feasibility of detecting meaningful biomechanical differences between footwear features in the wild using statistical tools and study design. Evaluating footwear in ecologically valid environments often creates additional variance in the data. This variance should not be treated as noise; instead, it is critical to capture this additional variance and challenges of ecologically valid terrain if we hope to use biomechanics to impact the development of new products

Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version

Multibody dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: Formulations and Numerical Methods, Efficient Methods and Real-Time Applications, Flexible Multibody Dynamics, Contact Dynamics and Constraints, Multiphysics and Coupled Problems, Control and Optimization, Software Development and Computer Technology, Aerospace and Maritime Applications, Biomechanics, Railroad Vehicle Dynamics, Road Vehicle Dynamics, Robotics, Benchmark Problems. The conference is organized by the Department of Mechanical Engineering of the Universitat Politècnica de Catalunya (UPC) in Barcelona. The organizers would like to thank the authors for submitting their contributions, the keynote lecturers for accepting the invitation and for the quality of their talks, the awards and scientific committees for their support to the organization of the conference, and finally the topic organizers for reviewing all extended abstracts and selecting the awards nominees.Postprint (published version

Soft Robotics: Design for Simplicity, Performance, and Robustness of Robots for Interaction with Humans.

This thesis deals with the design possibilities concerning the next generation of advanced Robots. Aim of the work is to study, analyse and realise artificial systems that are essentially simple, performing and robust and can live and coexist with humans. The main design guideline followed in doing so is the Soft Robotics Approach, that implies the design of systems with intrinsic mechanical compliance in their architecture. The first part of the thesis addresses design of new soft robotics actuators, or robotic muscles. At the beginning are provided information about what a robotic muscle is and what is needed to realise it. A possible classification of these systems is analysed and some criteria useful for their comparison are explained. After, a set of functional specifications and parameters is identified and defined, to characterise a specific subset of this kind of actuators, called Variable Stiffness Actuators. The selected parameters converge in a data-sheet that easily defines performance and abilities of the robotic system. A complete strategy for the design and realisation of this kind of system is provided, which takes into account their me- chanical morphology and architecture. As consequence of this, some new actuators are developed, validated and employed in the execution of complex experimental tasks. In particular the actuator VSA-Cube and its add-on, a Variable Damper, are developed as the main com- ponents of a robotics low-cost platform, called VSA-CubeBot, that v can be used as an exploratory platform for multi degrees of freedom experiments. Experimental validations and mathematical models of the system employed in multi degrees of freedom tasks (bimanual as- sembly and drawing on an uneven surface), are reported. The second part of the thesis is about the design of multi fingered hands for robots. In this part of the work the Pisa-IIT SoftHand is introduced. It is a novel robot hand prototype designed with the purpose of being as easily usable, robust and simple as an industrial gripper, while exhibiting a level of grasping versatility and an aspect comparable to that of the human hand. In the thesis the main theo- retical tool used to enable such simplification, i.e. the neuroscience– based notion of soft synergies, are briefly reviewed. The approach proposed rests on ideas coming from underactuated hand design. A synthesis method to realize a desired set of soft synergies through the principled design of adaptive underactuated mechanisms, which is called the method of adaptive synergies, is discussed. This ap- proach leads to the design of hands accommodating in principle an arbitrary number of soft synergies, as demonstrated in grasping and manipulation simulations and experiments with a prototype. As a particular instance of application of the method of adaptive syner- gies, the Pisa–IIT SoftHand is then described in detail. The design and implementation of the prototype hand are shown and its effec- tiveness demonstrated through grasping experiments. Finally, control of the Pisa/IIT Hand is considered. Few different control strategies are adopted, including an experimental setup with the use of surface Electromyographic signals