202 research outputs found
Iterative H.264 Source and Channel Decoding Using Sphere Packing Modulation Aided Layered Steered Space-Time Codes
The conventional two-stage turbo-detection schemes generally suffer from a Bit Error Rate (BER) floor. In this paper we circumvent this deficiency by proposing a three-stage turbo detected Sphere Packing (SP) modulation aided Layered Steered Space-Time Coding (LSSTC) scheme for H.264 coded video transmission over correlated Rayleigh fading channels. The soft-bit assisted H.264 coded bit-stream is protected using low-complexity short-block codes (SBCs), combined with a rate-1 recursive inner precoder is employed as an intermediate code which has an infinite impulse response and hence beneficially spreads the extrinsic information across the constituent decoders. This allows us to avoid having a BER floor. Additionally, the convergence behaviour of this serially concatenated scheme is investigated with the aid of Extrinsic Information Transfer (EXIT) Charts. The proposed system exhibits an Eb/N0 gain of about 12 dB in comparison to the benchmark scheme carrying out iterative source-channel decoding as well as Layered Steered Space-Time Coding (LSSTC) aided Sphere Packing (SP)demodulation, but dispensing with the optimised SBCs
Replacing the Soft FEC Limit Paradigm in the Design of Optical Communication Systems
The FEC limit paradigm is the prevalent practice for designing optical
communication systems to attain a certain bit-error rate (BER) without forward
error correction (FEC). This practice assumes that there is an FEC code that
will reduce the BER after decoding to the desired level. In this paper, we
challenge this practice and show that the concept of a channel-independent FEC
limit is invalid for soft-decision bit-wise decoding. It is shown that for low
code rates and high order modulation formats, the use of the soft FEC limit
paradigm can underestimate the spectral efficiencies by up to 20%. A better
predictor for the BER after decoding is the generalized mutual information,
which is shown to give consistent post-FEC BER predictions across different
channel conditions and modulation formats. Extensive optical full-field
simulations and experiments are carried out in both the linear and nonlinear
transmission regimes to confirm the theoretical analysis
Advanced constellation and demapper schemes for next generation digital terrestrial television broadcasting systems
206 p.Esta tesis presenta un nuevo tipo de constelaciones llamadas no uniformes. Estos esquemas presentan una eficacia de hasta 1,8 dB superior a las utilizadas en los últimos sistemas de comunicaciones de televisión digital terrestre y son extrapolables a cualquier otro sistema de comunicaciones (satélite, móvil, cable¿). Además, este trabajo contribuye al diseño de constelaciones con una nueva metodología que reduce el tiempo de optimización de días/horas (metodologías actuales) a horas/minutos con la misma eficiencia. Todas las constelaciones diseñadas se testean bajo una plataforma creada en esta tesis que simula el estándar de radiodifusión terrestre más avanzado hasta la fecha (ATSC 3.0) bajo condiciones reales de funcionamiento.Por otro lado, para disminuir la latencia de decodificación de estas constelaciones esta tesis propone dos técnicas de detección/demapeo. Una es para constelaciones no uniformes de dos dimensiones la cual disminuye hasta en un 99,7% la complejidad del demapeo sin empeorar el funcionamiento del sistema. La segunda técnica de detección se centra en las constelaciones no uniformes de una dimensión y presenta hasta un 87,5% de reducción de la complejidad del receptor sin pérdidas en el rendimiento.Por último, este trabajo expone un completo estado del arte sobre tipos de constelaciones, modelos de sistema, y diseño/demapeo de constelaciones. Este estudio es el primero realizado en este campo
On Low Complexity Detection for QAM Isomorphic Constellations
Despite of the known gap from the Shannon's capacity, several standards are
still employing QAM or star shape constellations, mainly due to the existing
low complexity detectors. In this paper, we investigate the low complexity
detection for a family of QAM isomorphic constellations. These constellations
are known to perform very close to the peak-power limited capacity,
outperforming the DVB-S2X standard constellations. The proposed strategy is to
first remap the received signals to the QAM constellation using the existing
isomorphism and then break the log likelihood ratio computations to two one
dimensional PAM constellations. Gains larger than 0.6 dB with respect to QAM
can be obtained over the peak power limited channels without any increase in
detection complexity. Our scheme also provides a systematic way to design
constellations with low complexity one dimensional detectors. Several open
problems are discussed at the end of the paper.Comment: Submitted to IEEE GLOBECOM 201
Coded modulation with APSK for OFDM-based visible light communications
Coded modulation with APSK is proposed for OFDM-based VLC systems. Simulation results show that the proposed scheme achieves better performance than conventional QAM counterpart in both DCO-OFDM and ACO-OFDM systems, while similar complexity is maintained
Constellation Shaping for WDM systems using 256QAM/1024QAM with Probabilistic Optimization
In this paper, probabilistic shaping is numerically and experimentally
investigated for increasing the transmission reach of wavelength division
multiplexed (WDM) optical communication system employing quadrature amplitude
modulation (QAM). An optimized probability mass function (PMF) of the QAM
symbols is first found from a modified Blahut-Arimoto algorithm for the optical
channel. A turbo coded bit interleaved coded modulation system is then applied,
which relies on many-to-one labeling to achieve the desired PMF, thereby
achieving shaping gain. Pilot symbols at rate at most 2% are used for
synchronization and equalization, making it possible to receive input
constellations as large as 1024QAM. The system is evaluated experimentally on a
10 GBaud, 5 channels WDM setup. The maximum system reach is increased w.r.t.
standard 1024QAM by 20% at input data rate of 4.65 bits/symbol and up to 75% at
5.46 bits/symbol. It is shown that rate adaptation does not require changing of
the modulation format. The performance of the proposed 1024QAM shaped system is
validated on all 5 channels of the WDM signal for selected distances and rates.
Finally, it was shown via EXIT charts and BER analysis that iterative
demapping, while generally beneficial to the system, is not a requirement for
achieving the shaping gain.Comment: 10 pages, 12 figures, Journal of Lightwave Technology, 201
- …