The AXIOM software layers

AXIOM project aims at developing a heterogeneous computing board (SMP-FPGA).The Software Layers developed at the AXIOM project are explained.OmpSs provides an easy way to execute heterogeneous codes in multiple cores. People and objects will soon share the same digital network for information exchange in a world named as the age of the cyber-physical systems. The general expectation is that people and systems will interact in real-time. This poses pressure onto systems design to support increasing demands on computational power, while keeping a low power envelop. Additionally, modular scaling and easy programmability are also important to ensure these systems to become widespread. The whole set of expectations impose scientific and technological challenges that need to be properly addressed.The AXIOM project (Agile, eXtensible, fast I/O Module) will research new hardware/software architectures for cyber-physical systems to meet such expectations. The technical approach aims at solving fundamental problems to enable easy programmability of heterogeneous multi-core multi-board systems. AXIOM proposes the use of the task-based OmpSs programming model, leveraging low-level communication interfaces provided by the hardware. Modular scalability will be possible thanks to a fast interconnect embedded into each module. To this aim, an innovative ARM and FPGA-based board will be designed, with enhanced capabilities for interfacing with the physical world. Its effectiveness will be demonstrated with key scenarios such as Smart Video-Surveillance and Smart Living/Home (domotics).Peer ReviewedPostprint (author's final draft

FIFTY YEARS OF MICROPROCESSOR EVOLUTION: FROM SINGLE CPU TO MULTICORE AND MANYCORE SYSTEMS

Nowadays microprocessors are among the most complex electronic systems that man has ever designed. One small silicon chip can contain the complete processor, large memory and logic needed to connect it to the input-output devices. The performance of today's processors implemented on a single chip surpasses the performance of a room-sized supercomputer from just 50 years ago, which cost over $ 10 million [1]. Even the embedded processors found in everyday devices such as mobile phones are far more powerful than computer developers once imagined. The main components of a modern microprocessor are a number of general-purpose cores, a graphics processing unit, a shared cache, memory and input-output interface and a network on a chip to interconnect all these components [2]. The speed of the microprocessor is determined by its clock frequency and cannot exceed a certain limit. Namely, as the frequency increases, the power dissipation increases too, and consequently the amount of heating becomes critical. So, silicon manufacturers decided to design new processor architecture, called multicore processors [3]. With aim to increase performance and efficiency these multiple cores execute multiple instructions simultaneously. In this way, the amount of parallel computing or parallelism is increased [4]. In spite of mentioned advantages, numerous challenges must be addressed carefully when more cores and parallelism are used.This paper presents a review of microprocessor microarchitectures, discussing their generations over the past 50 years. Then, it describes the currently used implementations of the microarchitecture of modern microprocessors, pointing out the specifics of parallel computing in heterogeneous microprocessor systems. To use efficiently the possibility of multi-core technology, software applications must be multithreaded. The program execution must be distributed among the multi-core processors so they can operate simultaneously. To use multi-threading, it is imperative for programmer to understand the basic principles of parallel computing and parallel hardware. Finally, the paper provides details how to implement hardware parallelism in multicore systems

A modular software architecture for UAVs

There have been several attempts to create scalable and hardware independent software architectures for Unmanned Aerial Vehicles (UAV). In this work, we propose an onboard architecture for UAVs where hardware abstraction, data storage and communication between modules are efficiently maintained. All processing and software development is done on the UAV while state and mission status of the UAV is monitored from a ground station. The architecture also allows rapid development of mission-specific third party applications on the vehicle with the help of the core module

Beyond Dataflow

This paper presents some recent advanced dataflow architectures. While the dataflow concept offers the potential of high performance, the performance of an actual dataflow implementation can be restricted by a limited number of functional units, limited memory bandwidth, and the need to associatively match pending operations with available functional units. Since the early 1970s, there have been significant developments in both fundamental research and practical realizations of dataflow models of computation. In particular, there has been active research and development in multithreaded architectures that evolved from the dataflow model. Also some other techniques for combining control-flow and dataflow emerged, such as coarse-grain dataflow, dataflow with complex machine operations, RISC dataflow, and micro dataflow. These developments have also had certain impact on the conception of highperformance superscalar processors in the “post-RISC” era

A review of High Performance Computing foundations for scientists

The increase of existing computational capabilities has made simulation emerge as a third discipline of Science, lying midway between experimental and purely theoretical branches [1, 2]. Simulation enables the evaluation of quantities which otherwise would not be accessible, helps to improve experiments and provides new insights on systems which are analysed [3-6]. Knowing the fundamentals of computation can be very useful for scientists, for it can help them to improve the performance of their theoretical models and simulations. This review includes some technical essentials that can be useful to this end, and it is devised as a complement for researchers whose education is focused on scientific issues and not on technological respects. In this document we attempt to discuss the fundamentals of High Performance Computing (HPC) [7] in a way which is easy to understand without much previous background. We sketch the way standard computers and supercomputers work, as well as discuss distributed computing and discuss essential aspects to take into account when running scientific calculations in computers.Comment: 33 page

Design of Special Function Units in Modern Microprocessors

Today’s computing systems demand high performance for applications such as cloud computing, web-based search engines, network applications, and social media tasks. Such software applications involve an extensive use of hashing and arithmetic operations in their computation. In this thesis, we explore the use of new special function units (SFUs) for modern microprocessors, to accelerate such workloads. First, we design an SFU for hashing. Hashing can reduce the complexity of search and lookup from O(p) to O(p/n), where n bins are used and p items are being processed. In modern microprocessors, hashing is done in software. In our work, we propose a novel hardware hash unit design for use in modern microprocessors. Since the hash unit is designed at the hardware level, several advantages are obtained by our approach. First, a hardware-based hash unit executes a single hash instruction to perform a hash operation. In a software-based hashing in modern microprocessors, a hash operation is compiled into multiple instructions, thereby degrading performance. Second, software-based hashing stores hash data in a DRAM (also, hash operation entries can be stored in one of the cache levels). In a hardware-based hash unit, hash data is stored in a dedicated memory module (a hardware hash table), which improves performance. Third, today’s operating systems execute multiple applications (processes) in parallel, which entail high memory utilization. Hence the operating systems require many context switching between different processes, which results in many cache misses. In a hardware-based hash unit, the cache misses is reduced significantly using the dedicated memory module (hash table). These advantages all reduce the power consumption and increase the overall system performance significantly with a minimal increase in the microprocessor’s die area. We evaluate our hardware-based hash unit and compare its performance with software-based hashing. We start by evaluating our design approach at the micro-architecture level in terms of system performance. After that, we design our approach at the circuit level design to obtain the area overhead. Also, we analyze our design’s power and delay for each hash operation. These results are compared with a traditional hashing implementation. Then, we present an FPGA-based coprocessor for hash unit acceleration, applied to a virus checking application. Second, we present an SFU to speed up arithmetic operations. We call this arithmetic SFU a programmable arithmetic unit (PAU). In modern microprocessors, applications that require heavy arithmetic computations are done in software. To improve the performance for such computations, we present a programmable arithmetic unit (PAU), a partially reconfigurable methodology for arithmetic applications. The PAU consists of a set of IP blocks connected to a reconfigurable FPGA controller via a fast mesh-based interconnect. The IP blocks in the PAU can be any IP block such as adders, subtractors, multipliers, comparators and sign extension units. The PAU can have one or more copies of the same IP block (for example, 5 adders and 7 multipliers). The FPGA controller is an on-chip FPGA-based reconfigurable control fabric. The FPGA controller enables different arithmetic applications to be embedded on the PAU. The FPGA controller is programmed for different applications. The reconfigurable logic is based on a LUT-based design like a traditional FPGA. The FPGA controller and the IP blocks in the PAU communicate via a high speed ring data fabric. In our work, we use the PAU as an SFU in modern microprocessors. We compare the performance of different hardware-based arithmetic applications in the PAU with software-based implementations in modern microprocessors