Flexible active power control for PV‐ESS systems:A review

The penetration of solar energy in the modern power system is still increasing with a fast growth rate after long development due to reduced environmental impact and ever-decreasing photovoltaic panel cost. Meanwhile, distribution networks have to deal with a huge amount and frequent fluctuations of power due to the intermittent nature of solar energy, which influences the grid stability and could cause a voltage rise in the low-voltage grid. In order to reduce these fluctuations and ensure a stable and reliable power supply, energy storage systems are introduced, as they can absorb or release energy on demand, which provides more control flexibility for PV systems. At present, storage technologies are still under development and integrated in renewable applications, especially in smart grids, where lowering the cost and enhancing the reliability are the main tasks. This study reviews and discusses several active power control strategies for hybrid PV and energy storage systems that deliver ancillary services for grid support. The technological advancements and developments of energy storage systems in grid-tied PV applications are also reviewed

Integration and Control of Distributed Renewable Energy Resources

The deployment of distributed renewable energy resources (DRERs) has accelerated globally due to environmental concerns and an increasing demand for electricity. DRERs are considered to be solutions to some of the current challenges related to power grids, such as reliability, resilience, efficiency, and flexibility. However, there are still several technical and non-technical challenges regarding the deployment of distributed renewable energy resources. Technical concerns associated with the integration and control of DRERs include, but are not limited, to optimal sizing and placement, optimal operation in grid-connected and islanded modes, as well as the impact of these resources on power quality, power system security, stability, and protection systems. On the other hand, non-technical challenges can be classified into three categories—regulatory issues, social issues, and economic issues. This Special Issue will address all aspects related to the integration and control of distributed renewable energy resources. It aims to understand the existing challenges and explore new solutions and practices for use in overcoming technical challenges

SCADA and related technologies for irrigation district modernization

Presented at SCADA and related technologies for irrigation district modernization: a USCID water management conference on October 26-29, 2005 in Vancouver, Washington.Includes bibliographical references.Overview of Supervisory Control and Data Acquisition (SCADA) -- Total Channel Control™ - The value of automation in irrigation distribution systems -- Design and implementation of an irrigation canal SCADA -- All American Canal Monitoring Project -- Taking closed piping flowmeters to the next level - new technologies support trends in data logging and SCADA systems -- Real-time model-based dam automation: a case study of the Piute Dam -- Effective implementation of algorithm theory into PLCs -- Optimal fuzzy control for canal control structures -- SCADA over Zigbee™ -- Synchronous radio modem technology for affordable irrigation SCADA systems -- A suggested criteria for the selection of RTUs and sensors -- Irrigation canals in Spain: the integral process of modernization -- Ten years of SCADA data quality control and utilization for system management and planning modernization -- Moderately priced SCADA implementation -- Increasing peak power generation using SCADA and automation: a case study of the Kaweah River Power Authority -- Eastern Irrigation District canal automation and Supervisory Control and Data Acquisition (SCADA) -- Case study on design and construction of a regulating reservoir pumping station -- Saving water with Total Channel Control® in the Macalister Irrigation District, Australia -- Leveraging SCADA to modernize operations in the Klamath Irrigation Project -- A 2005 update on the installation of a VFD/SCADA system at Sutter Mutual Water Company -- Truckee Carson Irrigation District Turnout Water Measurement Program -- The myth of a "Turnkey" SCADA system and other lessons learned -- Canal modernization in Central California Irrigation District - case study -- Remote monitoring and operation at the Colorado River Irrigation District -- Web-based GIS decision support system for irrigation districts -- Using RiverWare as a real time river systems management tool -- Submerged venturi flume -- Ochoco Irrigation District telemetry case study -- Uinta Basin Replacement Project: a SCADA case study in managing multiple interests and adapting to loss of storage -- Training SCADA operators with real-time simulation -- Demonstration of gate control with SCADA system in Lower Rio Grande Valley, in Texas -- Incorporating sharp-crested weirs into irrigation SCADA systems

State-of-the-art of design and operation of power systems with large amounts of wind power, summary of IEA Wind collaboration

An international forum for exchange of knowledge of power system impacts of wind power has been formed under the IEA Implementing Agreement on Wind Energy. The task “Design and Operation of Power Systems with Large Amounts of Wind Power” is analysing existing case studies from different power systems.There are a multitude of studies made and ongoing related to cost of wind integration. However, the results are not easy to compare. This paper summarises the results from 15 case studies

An avionics sensitivity study. Volume 1: Operational considerations

Equipment and operational concepts affecting aircraft in the terminal area are reported. Curved approach applications and modified climb and descent procedures for minimum fuel consumption are considered. The curved approach study involves the application of MLS guidance to enable execution of the current visual approach to Washington National Airport under instrument flight conditions. The operational significance and the flight path control requirements involved in the application of curved approach paths to this situation are considered. Alternative flight path control regimes are considered to achieve minimum fuel consumption subject to constraints related to air traffic control requirements, flight crew and passenger reactions, and airframe and powerplant limitations

Optimization Methods Applied to Power Systems Ⅱ

Electrical power systems are complex networks that include a set of electrical components that allow distributing the electricity generated in the conventional and renewable power plants to distribution systems so it can be received by final consumers (businesses and homes). In practice, power system management requires solving different design, operation, and control problems. Bearing in mind that computers are used to solve these complex optimization problems, this book includes some recent contributions to this field that cover a large variety of problems. More specifically, the book includes contributions about topics such as controllers for the frequency response of microgrids, post-contingency overflow analysis, line overloads after line and generation contingences, power quality disturbances, earthing system touch voltages, security-constrained optimal power flow, voltage regulation planning, intermittent generation in power systems, location of partial discharge source in gas-insulated switchgear, electric vehicle charging stations, optimal power flow with photovoltaic generation, hydroelectric plant location selection, cold-thermal-electric integrated energy systems, high-efficiency resonant devices for microwave power generation, security-constrained unit commitment, and economic dispatch problems

Proceedings of the NASA Conference on Space Telerobotics, volume 3

The theme of the Conference was man-machine collaboration in space. The Conference provided a forum for researchers and engineers to exchange ideas on the research and development required for application of telerobotics technology to the space systems planned for the 1990s and beyond. The Conference: (1) provided a view of current NASA telerobotic research and development; (2) stimulated technical exchange on man-machine systems, manipulator control, machine sensing, machine intelligence, concurrent computation, and system architectures; and (3) identified important unsolved problems of current interest which can be dealt with by future research

Human adaptive mechatronics methods for mobile working machines

Despite the trend of increasing automation degree in control systems, human operators are still needed in applications such as aviation and surgery, or machines used in remote mining, forestry, construction, and agriculture, just to name a few. Although there are research results showing that the performance between the operators of working machines differ significantly, there are currently no means to improve the performance of the human-machine system automatically based on the skill and working differences of the operators. Traditionally the human-machine systems are designed so that the machine is "constant" for every operator. On the contrary, the Human Adaptive Mechatronics (HAM) approach focuses on individual design, taking into account the skill differences and preferences of the operators. This thesis proposes a new type of a HAM system for mobile working machines called Human Adaptive Mechatronics and Coaching (HAMC) system that is designed to account for the challenges regarding to the measurement capability and the work complexity in the real-life machines. Moreover, the related subproblems including intent recognition, skill evaluation, human operator modeling, intelligent coaching and skill adaptivity are described. The intent recognition is solved using a Hidden Markov model (HMM) based work cycle modeling method, which is a basis for the skill evaluation. The methods are implemented in three industrial applications. The human operator modeling problem is studied from the structural models' perspective. The structural models can be used to describe a continuum of human operator models with respect to the operating points of the controlled machine. Several extensions and new approaches which enable more efficient parameter estimation using the experimental data are described for the conventional Modified Optimal Control Model (MOCM) of human operator. The human operator modeling methods are implemented to model a human operator controlling a trolley crane simulator. Finally, the concept of human adaptive Human-Machine Interface (HMI) is described. The analytic and knowledge-based approaches for realizing the HMI adaptation are presented and implemented for trolley crane simulator control

Quantum state engineering with Josephson-junction devices

We review recent theoretical and experimental progress in quantum state engineering with Josephson junction devices. The concepts of quantum computing have stimulated an increased activity in the field. Either charges or phases (fluxes) of the Josephson systems can be used as quantum degrees of freedom, and their quantum state can be manipulated coherently by voltage and current pulses. They thus can serve as qubits, and quantum logic gates can be performed. Their phase coherence time, which is limited, e.g., by the electromagnetic fluctuations in the control circuit, is long enough to allow a series of these manipulations. The quantum measurement process performed by a single-electron transistor, a SQUID, or further nanoelectronic devices is analyzed in detail.Comment: An article prepared for Reviews of Modern Physics, 46 pages, 23 figure