Age-Acknowledging Reliable Multiplier Design with Adaptive Hold Logic

Digital multipliers are among the most critical arithmetic functional units. The overall performance of these systems depends on the throughput of the multiplier. Meanwhile, the negative bias temperature instability effect occurs when a pMOS transistor is under negative bias (Vgs = −Vdd), increasing the threshold voltage of the pMOS transistor, and reducing multiplier speed. A similar phenomenon, positive bias temperature instability, occurs when an nMOS transistor is under positive bias. Both effects degrade transistor speed, and in the long term, the system may fail due to timing violations. Therefore, it is important to design reliable high performance multipliers. In this paper, we propose an aging-aware multiplier design with novel adaptive hold logic (AHL) circuit. The multiplier is able to provide higher throughput through the variable latency and can adjust the AHL circuit to mitigate performance degradation that is due to the aging effect. Moreover, the proposed architecture can be applied to a column- or row-bypassing multiplier. The experimental results show that our proposed architecture with 16 ×16 and 32 ×32 column-bypassing multipliers can attain up to 62.88% and 76.28% performance improvement, respectively, compared with 16×16 and 32×32 fixed-latency column-bypassing multipliers. Furthermore, our proposed architecture with 16 × 16 and 32 × 32 row-bypassing multipliers can achieve up to 80.17% and 69.40% performance improvement as compared with 16×16 and 32 × 32 fixed-latency row-bypassing multipliers

Design of variability compensation architectures of digital circuits with adaptive body bias

The most critical concern in circuit is to achieve high level of performance with very tight power constraint. As the high performance circuits moved beyond 45nm technology one of the major issues is the parameter variation i.e. deviation in process, temperature and voltage (PVT) values from nominal specifications. A key process parameter subject to variation is the transistor threshold voltage (Vth) which impacts two important parameters: frequency and leakage power. Although the degradation can be compensated by the worstcase scenario based over-design approach, it induces remarkable power and performance overhead which is undesirable in tightly constrained designs. Dynamic voltage scaling (DVS) is a more power efficient approach, however its coarse granularity implies difficulty in handling fine grained variations. These factors have contributed to the growing interest in power aware robust circuit design. We propose a variability compensation architecture with adaptive body bias, for low power applications using 28nm FDSOI technology. The basic approach is based on a dynamic prediction and prevention of possible circuit timing errors. In our proposal we are using a Canary logic technique that enables the typical-case design. The body bias generation is based on a DLL type method which uses an external reference generator and voltage controlled delay line (VCDL) to generate the forward body bias (FBB) control signals. The adaptive technique is used for dynamic detection and correction of path failures in digital designs due to PVT variations. Instead of tuning the supply voltage, the key idea of the design approach is to tune the body bias voltage bymonitoring the error rate during operation. The FBB increases operating speed with an overhead in leakage power

Robust low-power digital circuit design in nano-CMOS technologies

Device scaling has resulted in large scale integrated, high performance, low-power, and low cost systems. However the move towards sub-100 nm technology nodes has increased variability in device characteristics due to large process variations. Variability has severe implications on digital circuit design by causing timing uncertainties in combinational circuits, degrading yield and reliability of memory elements, and increasing power density due to slow scaling of supply voltage. Conventional design methods add large pessimistic safety margins to mitigate increased variability, however, they incur large power and performance loss as the combination of worst cases occurs very rarely. In-situ monitoring of timing failures provides an opportunity to dynamically tune safety margins in proportion to on-chip variability that can significantly minimize power and performance losses. We demonstrated by simulations two delay sensor designs to detect timing failures in advance that can be coupled with different compensation techniques such as voltage scaling, body biasing, or frequency scaling to avoid actual timing failures. Our simulation results using 45 nm and 32 nm technology BSIM4 models indicate significant reduction in total power consumption under temperature and statistical variations. Future work involves using dual sensing to avoid useless voltage scaling that incurs a speed loss. SRAM cache is the first victim of increased process variations that requires handcrafted design to meet area, power, and performance requirements. We have proposed novel 6 transistors (6T), 7 transistors (7T), and 8 transistors (8T)-SRAM cells that enable variability tolerant and low-power SRAM cache designs. Increased sense-amplifier offset voltage due to device mismatch arising from high variability increases delay and power consumption of SRAM design. We have proposed two novel design techniques to reduce offset voltage dependent delays providing a high speed low-power SRAM design. Increasing leakage currents in nano-CMOS technologies pose a major challenge to a low-power reliable design. We have investigated novel segmented supply voltage architecture to reduce leakage power of the SRAM caches since they occupy bulk of the total chip area and power. Future work involves developing leakage reduction methods for the combination logic designs including SRAM peripherals

Timing error detection and correction for power efficiency: an aggressive scaling approach

Low-power consumption has become an important aspect of processors and systems design. Many techniques ranging from architectural to system level are available. Voltage scaling or frequency boosting methods are the most effective to achieve low-power consumption as the dynamic power is proportional to the frequency and to the square of the supply voltage. The basic principle of operation of aggressive voltage scaling is to adjust the supply voltage to the lowest level possible to achieve minimum power consumption while maintaining reliable operations. Similarly, aggressive frequency boosting is to alter the operating frequency to achieve optimum performance improvement. In this study, an aggressive technique which employs voltage or frequency varying hardware circuit with the time-borrowing feature is presented. The proposed technique double samples the data to detect any timing violations as the frequency/voltage is scaled. The detected violations are masked by phase delaying the flip-flop clock to capture the late arrival data. This makes the system timing error tolerant without incurring error correction timing penalty. The proposed technique is implemented in a field programmable gate array using a two-stage arithmetic pipeline. Results on various benchmarks clearly demonstrate the achieved power savings and performance improvement.N/

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

inSense: A Variation and Fault Tolerant Architecture for Nanoscale Devices

Transistor technology scaling has been the driving force in improving the size, speed, and power consumption of digital systems. As devices approach atomic size, however, their reliability and performance are increasingly compromised due to reduced noise margins, difficulties in fabrication, and emergent nano-scale phenomena. Scaled CMOS devices, in particular, suffer from process variations such as random dopant fluctuation (RDF) and line edge roughness (LER), transistor degradation mechanisms such as negative-bias temperature instability (NBTI) and hot-carrier injection (HCI), and increased sensitivity to single event upsets (SEUs). Consequently, future devices may exhibit reduced performance, diminished lifetimes, and poor reliability. This research proposes a variation and fault tolerant architecture, the inSense architecture, as a circuit-level solution to the problems induced by the aforementioned phenomena. The inSense architecture entails augmenting circuits with introspective and sensory capabilities which are able to dynamically detect and compensate for process variations, transistor degradation, and soft errors. This approach creates ``smart\u27\u27 circuits able to function despite the use of unreliable devices and is applicable to current CMOS technology as well as next-generation devices using new materials and structures. Furthermore, this work presents an automated prototype implementation of the inSense architecture targeted to CMOS devices and is evaluated via implementation in ISCAS \u2785 benchmark circuits. The automated prototype implementation is functionally verified and characterized: it is found that error detection capability (with error windows from $\approx$30-400ps) can be added for less than 2\% area overhead for circuits of non-trivial complexity. Single event transient (SET) detection capability (configurable with target set-points) is found to be functional, although it generally tracks the standard DMR implementation with respect to overheads

Exploration of Digital Circuits and Transistor-Level Testing in the DARPA TRUST Program

The need to verify correct circuit operation has grown in recent years due to adversaries ability to compromise DoD systems. The DARPA program addressed this issue and implemented the DARPA TRUST program to verify untrusted circuits using software. The DARPA TRUST program was initiated in 2006 and due to this the limitations and potential errors in the program have not yet been fully explored. This research identifies the potential errors in the program by conducting transistor-level testing on circuits. The DARPA TRUST program currently operates at the gate-level and conducting various experiments at the transistor- level brought to light potential problems with current DARPA TRUST testing. The way that transistor-level verification is conducted is through netlist matching. A schematic of a circuit is created and the netlist is extracted, after that a metal layout of a circuit is created and the netlist is extracted. Once the two netlists are extracted, a matching program is used and the result determines if the verification process is successful. Parasitic capacitance was extracted in the metal layout version of a circuit and netlists were compared with the schematic version. Results show that parasitic capacitance is overlooked in the DARPA TRUST program even though this could potentially cause a fabricated device to fail. Transmission lines were simulated by creating metal wiring between two inverters. These metal lines mimic the operation of a transmission line. These transmission lines were experimented on and it was determined that the DARPA TRUST program does not effectively check for potential errors in transmission line fabrication. The results of this research brought to light the vulnerabilities in the DARPA TRUST program and addressed the need for the program to conduct transistor-level testing

Power efficient resilient microarchitectures for PVT variability mitigation

Nowadays, the high power density and the process, voltage, and temperature variations became the most critical issues that limit the performance of the digital integrated circuits because of the continuous scaling of the fabrication technology. Dynamic voltage and frequency scaling technique is used to reduce the power consumption while different time relaxation techniques and error recovery microarchitectures are used to tolerate the process, voltage, and temperature variations. These techniques reduce the throughput by scaling down the frequency or flushing and restarting the errant pipeline. This thesis presents a novel resilient microarchitecture which is called ERSUT-based resilient microarchitecture to tolerate the induced delays generated by the voltage scaling or the process, voltage, and temperature variations. The resilient microarchitecture detects and recovers the induced errors without flushing the pipeline and without scaling down the operating frequency. An ERSUT-based resilient 16 × 16 bit MAC unit, implemented using Global Foundries 65 nm technology and ARM standard cells library, is introduced as a case study with 18.26% area overhead and up to 1.5x speedup. At the typical conditions, the maximum frequency of the conventional MAC unit is about 375 MHz while the resilient MAC unit operates correctly at a frequency up to 565 MHz. In case of variations, the resilient MAC unit tolerates induced delays up to 50% of the clock period while keeping its throughput equal to the conventional MAC unit’s maximum throughput. At 375 MHz, the resilient MAC unit is able to scale down the supply voltage from 1.2 V to 1.0 V saving about 29% of the power consumed by the conventional MAC unit. A double-edge-triggered microarchitecture is also introduced to reduce the power consumption extremely by reducing the frequency of the clock tree to the half while preserving the same maximum throughput. This microarchitecture is applied to different ISCAS’89 benchmark circuits in addition to the 16x16 bit MAC unit and the average power reduction of all these circuits is 63.58% while the average area overhead is 31.02%. All these circuits are designed using Global Foundries 65nm technology and ARM standard cells library. Towards the full automation of the ERSUT-based resilient microarchitecture, an ERSUT-based algorithm is introduced in C++ to accelerate the design process of the ERSUT-based microarchitecture. The developed algorithm reduces the design-time efforts dramatically and allows the ERSUT-based microarchitecture to be adopted by larger industrial designs. Depending on the ERSUT-based algorithm, a validation study about applying the ERSUT-based microarchitecture on the MAC unit and different ISCAS’89 benchmark circuits with different complexity weights is introduced. This study shows that 72% of these circuits tolerates more than 14% of their clock periods and 54.5% of these circuits tolerates more than 20% while 27% of these circuits tolerates more than 30%. Consequently, the validation study proves that the ERSUT-based resilient microarchitecture is a valid applicable solution for different circuits with different complexity weights