Performance prediction and improvement of a Bistatic Passive coherent location Radar.

Passive Coherent Location (PCL) radar has proved to be feasible in a number of experimental systems, but the lack of comprehensive, published flight trials detracts somewhat from serious consideration of these PCL systems for operational applications, such as Air Traffic Control (ATC). The carrying out of flight trials is, in any case, difficult and very expensive. This dissertation presents a method for accurately predicting the performance of a bistatic passive coherent location radar with the effects of the environment taken into account. The effect of the environement on a propagating electromagnetic wave is obtained from the Advanced Refractive Effects Prediction System (AREPS) model. The resulting performance predictions, in the form of spatial signal-to-noise ratio (SNR), signal-to-interference ratio (SIR) and signal-to-noise-plus-interference ratio (SNIR) maps, provide a powerful planning tool for the application of systems such as ATC. Furthermore, the spatial coverage maps, based on the bistatic radar equation, can be related to a particular probability of detection and false alarm as well as to a required dynamic range of the receiver ADC. Overall, the method provides a visual, as well as a quantitative measure of radar coverage with region-specific atmospheric and terrain effects taken into account. The method proposed in this dissertation offers a marked improvement over traditional performance prediction methods based on the bistatic radar equation within a free space or flat terrain environment. It is understood that the direct path signal of the illuminating transmitter is the cause of some severe limitations within a PCL system. In the interest of suppressing the strong direct signal before the ADC and to complement the development of the prediction method, an antenna pattern was synthesised and applied to an array of folded dipoles in order to place a null in the direction of the strong transmitter. The synthesised antenna pattern and its improvement on the performance of the PCL system was then evaluated using the proposed prediction method presented in this dissertation

System design of the MeerKAT L - band 3D radar for monitoring near earth objects

This thesis investigates the current knowledge of small space debris (diameter less than 10 cm) and potentially hazardous asteroids (PHA) by the use of radar systems. It clearly identifies the challenges involved in detecting and tracking of small space debris and PHAs. The most significant challenges include: difficulty in tracking small space debris due to orbital instability and reduced radar cross-section (RCS), errors in some existing data sets, the lack of dedicated or contributing instruments in the Southern Hemisphere, and the large cost involved in building a high-performance radar for this purpose. This thesis investigates the cooperative use of the KAT-7 (7 antennas) and MeerKAT (64 antennas) radio telescope receivers in a radar system to improve monitoring of small debris and PHAs was investigated using theory and simulations, as a cost-effective solution. Parameters for a low cost and high-performance radar were chosen, based on the receiver digital back-end. Data from such radars will be used to add to existing catalogues thereby creating a constantly updated database of near Earth objects and bridging the data gap that is currently being filled by mathematical models. Based on literature and system requirements, quasi-monostatic, bistatic, multistatic, single input multiple output (SIMO) radar configurations were proposed for radio telescope arrays in detecting, tracking and imaging small space debris in the low Earth orbit (LEO) and PHAs. The maximum dwell time possible for the radar geometry was found to be 30 seconds, with coherent integration limitations of 2 ms and 121 ms for accelerating and non-accelerating targets, respectively. The multistatic and SIMO radar configurations showed sufficient detection (SNR 13 dB) for small debris and quasi-monostatic configuration for PHAs. Radar detection, tracking and imaging (ISAR) simulations were compared to theory and ambiguities in range and Doppler were compensated for. The main contribution made by this work is a system design for a high performance, cost effective 3D radar that uses the KAT-7 and MeerKAT radio telescope receivers in a commensal manner. Comparing theory and simulations, the SNR improvement, dwell time increase, tracking and imaging capabilities, for small debris and PHAs compared to existing assets, was illustrated. Since the MeerKAT radio telescope is a precursor for the SKA Africa, extrapolating the capabilities of the MeerKAT radar to the SKA radar implies that it would be the most sensitive and high performing contributor to space situational awareness, upon its completion. From this feasibility study, the MeerKAT 3D distributed radar will be able to detect debris of diameter less than 10 cm at altitudes between 700 km to 900 km, and PHAs, with a range resolution of 15 m, a minimum SNR of 14 dB for 152 pulses for a coherent integration time of 2.02 ms. The target range (derived from the two way delay), velocity (from Doppler frequency) and direction will be measured within an accuracy of: 2.116 m, 15.519 m/s, 0.083° (single antenna), respectively. The range, velocity accuracies and SNR affect orbit prediction accuracy by 0.021 minutes for orbit period and 0.0057° for orbit inclination. The multistatic radar was found to be the most suitable and computationally efficient configuration compared to the bistatic and SIMO configurations, and beamforming should be implemented as required by specific target geometry

Sea clutter simulation

Includes bibliograpical references.This dissertation presents the results of a study, the aim of which was the prediction of sea clutter characteristics including the temporal properties of the return signals as observed by a maritime surveillance radar system. The compound K distribution model used to generate clutter amplitude statistic enables the simulation of sea clutter with a good level of approximation to real radar data and this model forms the basis for the simulation of sea clutter amplitude statistic in this dissertation. Using this distribution, a sea clutter simulator is designed to generate correlated K distributed random variates from a predefined correlation function using the method by Ward and Tough [1 ]. Results from the sea clutter simulator shows that the simulated correlated random variates fit the theoretical K distribution PDF. Experimental sea clutter measurements were carried out using an experimental netted radar system. This was done at Scarborough Cape Town. Result obtained from the monostatic node is presented. This shows the amplitude statistics of the clutter as well as the temporal variation of the Doppler spectrum. Conclusions are drawn based on this results and suggestions made for further work

A scalable real-time processing chain for radar exploiting illuminators of opportunity

Includes bibliographical references.This thesis details the design of a processing chain and system software for a commensal radar system, that is, a radar that makes use of illuminators of opportunity to provide the transmitted waveform. The stages of data acquisition from receiver back-end, direct path interference and clutter suppression, range/Doppler processing and target detection are described and targeted to general purpose commercial off-the-shelf computing hardware. A detailed low level design of such a processing chain for commensal radar which includes both processing stages and processing stage interactions has, to date, not been presented in the Literature. Furthermore, a novel deployment configuration for a networked multi-site FM broadcast band commensal radar system is presented in which the reference and surveillance channels are record at separate locations

Radar target micro-doppler signature classification

This thesis reports on research into the field of Micro-Doppler Signature (μ-DS) based radar Automatic Target Recognition (ATR) with additional contributions to general radar ATR methodology. The μ-DS based part of the research contributes to three distinct areas: time domain classification; frequency domain classification; and multiperspective μ-DS classification that includes the development of a theory for the multistatic μ-DS. The contribution to general radar ATR is the proposal of a methodology to allow better evaluation of potential approaches and to allow comparison between different studies. The proposed methodology is based around a “black box” model of a radar ATR system that, critically, includes a threshold to detect inputs that are previously unknown to the system. From this model a set of five evaluation metrics are defined. The metrics increase the understanding of the classifier’s performance from the common probability of correct classification, that reports how often the classifier correctly identifies an input, to understanding how reliable it is, how capable it is of generalizing from the reference data, and how effective its unknown input detection is. Additionally, the significance of performance prediction is discussed and a preliminary method to estimate how well a classifier should perform is developed. The proposed methodology is then used to evaluate the μ-DS based radar ATR approaches considered. The time domain classification investigation is based around using Dynamic Time Warping (DTW) to identify radar targets based on their μ-DS. DTW is a speech processing technique that classifies data series by comparing them with a pre-classified reference dataset. This is comparable to the common k-Nearest Neighbour (k-NN) algorithm, so k-NN is used as a benchmark against which to evaluate DTW’s performance. The DTW approach is observed to work well. It achieved high probability of correct classification and reliability as well as being able to detect inputs of unknown class. However, the classifier’s ability to generalize from the reference data is less impressive and it performed only slightly better than a random selection from the possible output classes. Difficulties in classifying the μ-DS in the time domain are identified from the k-NN results prompting a change to the frequency domain. Processing the μ-DS in the frequency domain permitted the development of an advanced feature extraction routine to maximize the separation of the target classes and therefore reduce the effort required to classify them. The frequency domain also permitted the use of the performance prediction method developed as part of the radar ATR methodology and the introduction of a na¨ıve Bayesian approach to classification. The results for the DTW and k-NN classifiers in the frequency domain were comparable to the time domain, an unexpected result since it was anticipated that the μ-DS would be easier to classify in the frequency domain. However, the naıve Bayesian classifier produced excellent results that matched with the predicted performance suggesting it could not be bettered. With a successful classifier, that would be suitable for real-world use, developed attention turned to the possibilities offered by the multistatic μ-DS. Multiperspective radar ATR uses data collected from different target aspects simultaneously to improve classification rates. It has been demonstrated successful for some of the alternatives to μ-DS based ATR and it was therefore speculated that it might improve the performance of μ-DS ATR solutions. The multiple perspectives required for the classifier were gathered using a multistatic radar developed at University College London (UCL). The production of a dataset, and its subsequent analysis, resulted in the first reported findings in the novel field of the multistatic μ-DS theory. Unfortunately, the nature of the radar used resulted in limited micro-Doppler being observed in the collected data and this reduced its value for classification testing. An attempt to use DTW to perform multiperspective μ-DS ATR was made but the results were inconclusive. However, consideration of the improvements offered by multiperspective processing in alternative forms of ATR mean it is still expected that μ-DS based ATR would benefit from this processing

Wide-Angle Multistatic Synthetic Aperture Radar: Focused Image Formation and Aliasing Artifact Mitigation

Traditional monostatic Synthetic Aperture Radar (SAR) platforms force the user to choose between two image types: larger, low resolution images or smaller, high resolution images. Switching to a Wide-Angle Multistatic Synthetic Aperture Radar (WAM-SAR) approach allows formation of large high-resolution images. Unfortunately, WAM-SAR suffers from two significant implementation problems. First, wavefront curvature effects, non-linear flight paths, and warped ground planes lead to image defocusing with traditional SAR processing methods. A new 3-D monostatic/bistatic image formation routine solves the defocusing problem, correcting for all relevant wide-angle effects. Inverse SAR (ISAR) imagery from a Radar Cross Section (RCS) chamber validates this approach. The second implementation problem stems from the large Doppler spread in the wide-angle scene, leading to severe aliasing problems. This research effort develops a new anti-aliasing technique using randomized Stepped-Frequency (SF) waveforms to form Doppler filter nulls coinciding with aliasing artifact locations. Both simulation and laboratory results demonstrate effective performance, eliminating more than 99% of the aliased energy

FMCW Signals for Radar Imaging and Channel Sounding

A linear / stepped frequency modulated continuous wave (FMCW) signal has for a long time been used in radar and channel sounding. A novel FMCW waveform known as “Gated FMCW” signal is proposed in this thesis for the suppression of strong undesired signals in microwave radar applications, such as: through-the-wall, ground penetrating, and medical imaging radar. In these applications the crosstalk signal between antennas and the reflections form the early interface (wall, ground surface, or skin respectively) are much stronger in magnitude compared to the backscattered signal from the target. Consequently, if not suppressed they overshadow the target’s return making detection a difficult task. Moreover, these strong unwanted reflections limit the radar’s dynamic range and might saturate or block the receiver causing the reflection from actual targets (especially targets with low radar cross section) to appear as noise. The effectiveness of the proposed waveform as a suppression technique was investigated in various radar scenarios, through numerical simulations and experiments. Comparisons of the radar images obtained for the radar system operating with the standard linear FMCW signal and with the proposed Gated FMCW waveform are also made. In addition to the radar work the application of FMCW signals to radio propagation measurements and channel characterisation in the 60 GHz and 2-6 GHz frequency bands in indoor and outdoor environments is described. The data are used to predict the bit error rate performance of the in-house built measurement based channel simulator and the results are compared with the theoretical multipath channel simulator available in Matlab

Measurement and modelling of bistatic sea clutter

There is a growing interest in bistatic radars; however, such systems cannot reach their full potential unless the designer has a proper understanding of the environment in which they operate. Rather little information has been published on bistatic clutter and out-of-plane bistatic sea clutter in particular. This is due to a number of factors including the inherent complexity of conducting bistatic radar trials and the resulting lack of high quality bistatic data. In this thesis the collection and analysis of a unique set of bistatic sea clutter data is described. To achieve this objective a novel multistatic radar system was developed. The nodes do not need to be physically connected. This system has a peak transmitted power of more than 500 W. Synchronisation in time and frequency was achieved using GPS disciplined oscillators built and designed at the University of Cape Town. Using the above system simultaneous bistatic and monostatic sea clutter and target signatures were recorded in the UK and South Africa at various geometries and weather conditions. Parts of this unique data set related to out-of-plane bistatic sea clutter was analysed in this thesis. The data covered both co- and cross-polarised sea clutter data at low grazing angles with bistatic angles between 30° and 120°. Data sets covering a range of conditions with sea states from 2 – 5. Using the recorded data it was shown that the ratio of the bistatic normalised radar cross section to the monostatic normalised radar cross section dropped as the scattering angle was increased until the scattering angle was around 90°. Furthermore, the cross-polarised bistatic normalised radar cross section was found to be larger than the cross-polarised monostatic normalised radar cross section when the scattering angle was around 90°. A new empirical model for predicting bistatic normalised radar cross section has been developed. The model is applicable to both in-plane and out-of-plane geometries. The model was able to provide a good fit to both UCL and external data. The temporal correlation properties of both monostatic and bistatic data were studied. It was found that the speckle component of both bistatic and monostatic clutter decorrelated in tens of milliseconds, with the decorrelation time longer for bistatic clutter. The texture of both bistatic and monostatic clutter had similar autocorrelation functions and had similar decorrelation times. By comparing the texture and intensity autocorrelation functions it was concluded that the compound model still holds. It was also found that bistatic clutter was less ‘spiky’ than monostatic clutter particularly at horizontal polarisation. This was due to the reduction in the intensity of the spikes due to specular reflections. By combing the effects of the reduction in reflectivity and spikiness it was shown that a bistatic radar would require a smaller signal to interference ratio than a monostatic radar for the same probability of detection and probability of false alarm. This was more evident at angles close to 90° and for horizontal polarisation. In summary this thesis reports the collection and analysis of novel simultaneous monostatic and bistatic sea clutter and target data. This was achieved by the development of a unique multistatic radar system. This work has resulted in significant advances in both netted radar technology and understanding of bistatic sea clutter

Aeronautical engineering, a continuing bibliography with indexes

This bibliography lists 567 reports, articles and other documents introduced into the NASA scientific and technical information system in January 1984