Time domain analysis of switching transient fields in high voltage substations

Switching operations of circuit breakers and disconnect switches generate transient currents propagating along the substation busbars. At the moment of switching, the busbars temporarily acts as antennae radiating transient electromagnetic fields within the substations. The radiated fields may interfere and disrupt normal operations of electronic equipment used within the substation for measurement, control and communication purposes. Hence there is the need to fully characterise the substation electromagnetic environment as early as the design stage of substation planning and operation to ensure safe operations of the electronic equipment. This paper deals with the computation of transient electromagnetic fields due to switching within a high voltage air-insulated substation (AIS) using the finite difference time domain (FDTD) metho

Monitoring, fault detection and estimation in processes using multivariate statistical

Multivariate statistical techniques are one of the most widely used approaches in data driven monitoring and fault detection schemes in industrial processes. Concretely, principal component analysis (PCA) has been applied to many complex systems with good results. Nevertheless, the PCA-based fault detection and isolation approaches present some problems in the monitoring of processes with different operating modes and in the identification of the fault root in the fault isolation phase. PCA uses historical databases to build empirical models. The models obtained are able to describe the system¿s trend. PCA models extract useful information from the historical data. This extraction is based on the calculation of the relationship between the measured variables. When a fault appears, it can change the covariance structure captured, and this situation can be detected using different control charts. Another widely used multivariate statistical technique is partial least squares regression (PLS). PLS has also been applied as a data driven fault detection and isolation method. Moreover, this type of methods has been used as estimation techniques in soft sensor design. PLS is a regression method based on principal components. The main goal of this Thesis deals with the monitoring, fault detection and isolation and estimation methods in processes based on multivariate statistical techniques such as principal component analysis and partial least squares. The main contributions of this work can be arranged in the three following topics: ¿ The first topic is related with the monitoring of continuous processes. When a process operates in several operating modes, the classical PCA approach is not the most suitable method. In this work, an approach for monitoring the whole behaviour of a process, taking into account the different operating modes and transient states, is presented. The monitoring of transient states and start-ups is studied in detail. Also, the continuous processes which do not operate in a strict steady state are monitored in a similar way to the transient states. ¿ The second topic is related with the combination of model-based structural model decomposition techniques and principal component analysis. Concretely, the possible conflicts (PCs) approach is applied. PCs compute subsystems within a system model as minimal subsets of equations with an analytical redundancy property to detect and isolate faults. The residuals obtained with this method can be useful to perform a complete fault isolation procedure. These residuals are monitored using a PCA model in order to simplify and improve the fault detection task. ¿ The third topic addresses the estimation task in soft sensor design. In this case, the soft sensors of a real process are studied and improved using neural networks and multivariate statistical techniques. In this case, a dry substance (DS) content sensor based on indirect measurements is replaced by a neural network-based sensor. This type of sensors take into account more variables of the process and obtain more robust and accurate estimations. Moreover, this sensor can be improved using a PCA layer at the network input in order to reduce the number of inputs in the network. Also, a PLS-based sensor is designed in this topic. It also improves the sensor based on indirect measurements. Finally, the different approaches developed in this work have been applied to several process plants. Concretely, a two-communicated tanks system, the evaporation section of a sugar factory and a reverse osmosis desalination plant are the systems used in this dissertationDepartamento de Ingenieria de Sistemas y Automátic

Context-awareness for mobile sensing: a survey and future directions

The evolution of smartphones together with increasing computational power have empowered developers to create innovative context-aware applications for recognizing user related social and cognitive activities in any situation and at any location. The existence and awareness of the context provides the capability of being conscious of physical environments or situations around mobile device users. This allows network services to respond proactively and intelligently based on such awareness. The key idea behind context-aware applications is to encourage users to collect, analyze and share local sensory knowledge in the purpose for a large scale community use by creating a smart network. The desired network is capable of making autonomous logical decisions to actuate environmental objects, and also assist individuals. However, many open challenges remain, which are mostly arisen due to the middleware services provided in mobile devices have limited resources in terms of power, memory and bandwidth. Thus, it becomes critically important to study how the drawbacks can be elaborated and resolved, and at the same time better understand the opportunities for the research community to contribute to the context-awareness. To this end, this paper surveys the literature over the period of 1991-2014 from the emerging concepts to applications of context-awareness in mobile platforms by providing up-to-date research and future research directions. Moreover, it points out the challenges faced in this regard and enlighten them by proposing possible solutions

Algorithms for sensor validation and multisensor fusion

Existing techniques for sensor validation and sensor fusion are often based on analytical sensor models. Such models can be arbitrarily complex and consequently Gaussian distributions are often assumed, generally with a detrimental effect on overall system performance. A holistic approach has therefore been adopted in order to develop two novel and complementary approaches to sensor validation and fusion based on empirical data. The first uses the Nadaraya-Watson kernel estimator to provide competitive sensor fusion. The new algorithm is shown to reliably detect and compensate for bias errors, spike errors, hardover faults, drift faults and erratic operation, affecting up to three of the five sensors in the array. The inherent smoothing action of the kernel estimator provides effective noise cancellation and the fused result is more accurate than the single 'best sensor'. A Genetic Algorithm has been used to optimise the Nadaraya-Watson fuser design. The second approach uses analytical redundancy to provide the on-line sensor status output μH∈[0,1], where μH=1 indicates the sensor output is valid and μH=0 when the sensor has failed. This fuzzy measure is derived from change detection parameters based on spectral analysis of the sensor output signal. The validation scheme can reliably detect a wide range of sensor fault conditions. An appropriate context dependent fusion operator can then be used to perform competitive, cooperative or complementary sensor fusion, with a status output from the fuser providing a useful qualitative indication of the status of the sensors used to derive the fused result. The operation of both schemes is illustrated using data obtained from an array of thick film metal oxide pH sensor electrodes. An ideal pH electrode will sense only the activity of hydrogen ions, however the selectivity of the metal oxide device is worse than the conventional glass electrode. The use of sensor fusion can therefore reduce measurement uncertainty by combining readings from multiple pH sensors having complementary responses. The array can be conveniently fabricated by screen printing sensors using different metal oxides onto a single substrate

Implementation of an IoT Based Radar Sensor Network for Wastewater Management

Critical wastewater events such as sewer main blockages or overflows are often not detected until after the fact. These events can be costly, from both an environmental impact and monetary standpoint. A standalone, portable radar device allowing non-invasive benchmarking of sewer pumping station (SPS) pumps is presented. Further, by configuring and deploying a complete Low Power Wide Area Network (LPWAN), Shoalhaven Water (SW) now has the opportunity to create Internet of Things (IoT)-capable devices that offer freedom from the reliance on mobile network providers, whilst avoiding congestion on the existing Supervisory Control and Data Acquisition (SCADA) telemetry backbone. This network infrastructure allows for devices capable of real-time monitoring to alert of any system failures, providing an effective tool to proactively capture the current state of the sewer network between the much larger SPSs. This paper presents novel solutions to improve the current wastewater network management procedures employed by SW. This paper also offers a complete review of wastewater monitoring networks and is one of the first to offer robust testing of Long Range Wide Area Network (LoRaWAN) network capabilities in Australia. The paper also provides a comprehensive summary of the LoRa protocol and all its functions. It was found that a LPWAN, utilising the LoRaWAN protocol and deployed appropriately within a geographic area, can attain maximum transmission distances of 20 km within an urban environment and up to 35 km line of sight

Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review

With the privatization and intense competition that characterize the volatile energy sector, the gas turbine industry currently faces new challenges of increasing operational flexibility, reducing operating costs, improving reliability and availability while mitigating the environmental impact. In this complex, changing sector, the gas turbine community could address a set of these challenges by further development of high fidelity, more accurate and computationally efficient engine health assessment, diagnostic and prognostic systems. Recent studies have shown that engine gas-path performance monitoring still remains the cornerstone for making informed decisions in operation and maintenance of gas turbines. This paper offers a systematic review of recently developed engine performance monitoring, diagnostic and prognostic techniques. The inception of performance monitoring and its evolution over time, techniques used to establish a high-quality dataset using engine model performance adaptation, and effects of computationally intelligent techniques on promoting the implementation of engine fault diagnosis are reviewed. Moreover, recent developments in prognostics techniques designed to enhance the maintenance decision-making scheme and main causes of gas turbine performance deterioration are discussed to facilitate the fault identification module. The article aims to organize, evaluate and identify patterns and trends in the literature as well as recognize research gaps and recommend new research areas in the field of gas turbine performance-based monitoring. The presented insightful concepts provide experts, students or novice researchers and decision-makers working in the area of gas turbine engines with the state of the art for performance-based condition monitoring