4,575 research outputs found
Generalized detector as a spectrum sensor in cognitive radio networks
The implementation of the generalized detector (GD) in cognitive radio (CR) systems allows us to improve the spectrum sensing performance in comparison with employment of the conventional detectors. We analyze the spectrum sensing performance for the uncorrelated and spatially correlated receive antenna array elements. Addi¬tionally, we consider a practical case when the noise power at the output of GD linear systems (the preliminary and additional filters) is differed by value. The choice of the optimal GD threshold based on the minimum total error rate criterion is also discussed. Simulation results demonstrate superiority of GD implementation in CR sys¬tem as spectrum sensor in comparison with the energy detector (ED), weighted ED (WED), maximum-minimum eigenvalue (MME) detector, and generalized likelihood ratio test (GLRT) detecto
Cooperative Symbol-Based Signaling for Networks with Multiple Relays
Wireless channels suffer from severe inherent impairments and hence
reliable and high data rate wireless transmission is particularly challenging to
achieve. Fortunately, using multiple antennae improves performance in wireless
transmission by providing space diversity, spatial multiplexing, and power gains.
However, in wireless ad-hoc networks multiple antennae may not be acceptable
due to limitations in size, cost, and hardware complexity. As a result, cooperative
relaying strategies have attracted considerable attention because of their abilities
to take advantage of multi-antenna by using multiple single-antenna relays.
This study is to explore cooperative signaling for different relay networks,
such as multi-hop relay networks formed by multiple single-antenna relays and
multi-stage relay networks formed by multiple relaying stages with each stage
holding several single-antenna relays. The main contribution of this study is the
development of a new relaying scheme for networks using symbol-level
modulation, such as binary phase shift keying (BPSK) and quadrature phase shift
keying (QPSK). We also analyze effects of this newly developed scheme when it
is used with space-time coding in a multi-stage relay network. Simulation results
demonstrate that the new scheme outperforms previously proposed schemes:
amplify-and-forward (AF) scheme and decode-and-forward (DF) scheme
Resource Allocation in Wireless Networks with RF Energy Harvesting and Transfer
Radio frequency (RF) energy harvesting and transfer techniques have recently
become alternative methods to power the next generation of wireless networks.
As this emerging technology enables proactive replenishment of wireless
devices, it is advantageous in supporting applications with quality-of-service
(QoS) requirement. This article focuses on the resource allocation issues in
wireless networks with RF energy harvesting capability, referred to as RF
energy harvesting networks (RF-EHNs). First, we present an overview of the
RF-EHNs, followed by a review of a variety of issues regarding resource
allocation. Then, we present a case study of designing in the receiver
operation policy, which is of paramount importance in the RF-EHNs. We focus on
QoS support and service differentiation, which have not been addressed by
previous literatures. Furthermore, we outline some open research directions.Comment: To appear in IEEE Networ
A Simple Cooperative Diversity Method Based on Network Path Selection
Cooperative diversity has been recently proposed as a way to form virtual
antenna arrays that provide dramatic gains in slow fading wireless
environments. However most of the proposed solutions require distributed
space-time coding algorithms, the careful design of which is left for future
investigation if there is more than one cooperative relay. We propose a novel
scheme, that alleviates these problems and provides diversity gains on the
order of the number of relays in the network. Our scheme first selects the best
relay from a set of M available relays and then uses this best relay for
cooperation between the source and the destination. We develop and analyze a
distributed method to select the best relay that requires no topology
information and is based on local measurements of the instantaneous channel
conditions. This method also requires no explicit communication among the
relays. The success (or failure) to select the best available path depends on
the statistics of the wireless channel, and a methodology to evaluate
performance for any kind of wireless channel statistics, is provided.
Information theoretic analysis of outage probability shows that our scheme
achieves the same diversity-multiplexing tradeoff as achieved by more complex
protocols, where coordination and distributed space-time coding for M nodes is
required, such as those proposed in [7]. The simplicity of the technique,
allows for immediate implementation in existing radio hardware and its adoption
could provide for improved flexibility, reliability and efficiency in future 4G
wireless systems.Comment: To appear, IEEE JSAC, special issue on 4
Reliable multi-hop routing with cooperative transmissions in energy-constrained networks
We present a novel approach in characterizing the optimal reliable multi-hop virtual multiple-input single-output (vMISO) routing in ad hoc networks. Under a high node density regime, we determine the optimal cardinality of the cooperation
sets at each hop on a path minimizing the total energy cost per transmitted bit. Optimal cooperating set cardinality curves are derived, and they can be used to determine the optimal routing strategy based on the required reliability, transmission power, and path loss coefficient. We design a new greedy geographical
routing algorithm suitable for vMISO transmissions, and demonstrate the applicability of our results for more general networks
Wireless Virtual Multiple Antenna Networks for Critical Process Control: Protocol Design and Experiments:
Wireless telemetry systems for remote monitoring and control of industrial processes are now becoming a relevant topic in the field of networked control. Wireless closed-loop control systems have stricter delay and link reliability requirements compared to conventional sensor networks for open-loop monitoring and call for the development of advanced network architectures. By following the guidelines introduced by recent standardization, this paper focuses on the most recent technological advances to enable wireless networked control for tight closed-loop applications with cycle times below 100 ms. The cooperative network paradigm is indicated as the key technology to enable cable replacing even in critical control applications. A cooperative communication system enables wireless devices placed at geographically separated locations to act as a virtual ensemble of antennas that creates a virtual multiple-antenna-distributed system. A proprietary link-layer protocol/based on the IEEE 802.15.4 physical layer has been developed and tested in an indoor environment characterized by non-line-of-sight (NLOS) propagation and dense obstacles. The measurements obtained from the testbed evaluate experimentally the benefits (and the limitations) of cable replacing in critical process control
A Survey of Physical Layer Security Techniques for 5G Wireless Networks and Challenges Ahead
Physical layer security which safeguards data confidentiality based on the
information-theoretic approaches has received significant research interest
recently. The key idea behind physical layer security is to utilize the
intrinsic randomness of the transmission channel to guarantee the security in
physical layer. The evolution towards 5G wireless communications poses new
challenges for physical layer security research. This paper provides a latest
survey of the physical layer security research on various promising 5G
technologies, including physical layer security coding, massive multiple-input
multiple-output, millimeter wave communications, heterogeneous networks,
non-orthogonal multiple access, full duplex technology, etc. Technical
challenges which remain unresolved at the time of writing are summarized and
the future trends of physical layer security in 5G and beyond are discussed.Comment: To appear in IEEE Journal on Selected Areas in Communication
Design and realization of precise indoor localization mechanism for Wi-Fi devices
Despite the abundant literature in the field, there is still the need to find a time-efficient, highly accurate, easy to deploy and robust localization algorithm for real use. The algorithm only involves minimal human intervention. We propose an enhanced Received Signal Strength Indicator (RSSI) based positioning algorithm for Wi-Fi capable devices, called the Dynamic Weighted Evolution for Location Tracking (DWELT). Due to the multiple phenomena affecting the propagation of radio signals, RSSI measurements show fluctuations that hinder the utilization of straightforward positioning mechanisms from widely known propagation loss models. Instead, DWELT uses data processing of raw RSSI values and applies a weighted posterior-probabilistic evolution for quick convergence of localization and tracking. In this paper, we present the first implementation of DWELT, intended for 1D location (applicable to tunnels or corridors), and the first step towards a more generic implementation. Simulations and experiments show an accuracy of 1m in more than 81% of the cases, and less than 2m in the 95%.Peer ReviewedPostprint (published version
- …