High performance algorithms for large scale placement problem

Placement is one of the most important problems in electronic design automation (EDA). An inferior placement solution will not only affect the chip’s performance but might also make it nonmanufacturable by producing excessive wirelength, which is beyond available routing resources. Although placement has been extensively investigated for several decades, it is still a very challenging problem mainly due to that design scale has been dramatically increased by order of magnitudes and the increasing trend seems unstoppable. In modern design, chips commonly integrate millions of gates that require over tens of metal routing layers. Besides, new manufacturing techniques bring out new requests leading to that multi-objectives should be optimized simultaneously during placement. Our research provides high performance algorithms for placement problem. We propose (i) a high performance global placement core engine POLAR; (ii) an efficient routability-driven placer POLAR 2.0, which is an extension of POLAR to deal with routing congestion; (iii) an ultrafast global placer POLAR 3.0, which explore parallelism on POLAR and can make full use of multi-core system; (iv) some efficient triple patterning lithography (TPL) aware detailed placement algorithms

The IPS fidelity scale as a guideline to implement Supported Employment

info:eu-repo/semantics/publishe

A Multi-layer Fpga Framework Supporting Autonomous Runtime Partial Reconfiguration

Partial reconfiguration is a unique capability provided by several Field Programmable Gate Array (FPGA) vendors recently, which involves altering part of the programmed design within an SRAM-based FPGA at run-time. In this dissertation, a Multilayer Runtime Reconfiguration Architecture (MRRA) is developed, evaluated, and refined for Autonomous Runtime Partial Reconfiguration of FPGA devices. Under the proposed MRRA paradigm, FPGA configurations can be manipulated at runtime using on-chip resources. Operations are partitioned into Logic, Translation, and Reconfiguration layers along with a standardized set of Application Programming Interfaces (APIs). At each level, resource details are encapsulated and managed for efficiency and portability during operation. An MRRA mapping theory is developed to link the general logic function and area allocation information to the device related physical configuration level data by using mathematical data structure and physical constraints. In certain scenarios, configuration bit stream data can be read and modified directly for fast operations, relying on the use of similar logic functions and common interconnection resources for communication. A corresponding logic control flow is also developed to make the entire process autonomous. Several prototype MRRA systems are developed on a Xilinx Virtex II Pro platform. The Virtex II Pro on-chip PowerPC core and block RAM are employed to manage control operations while multiple physical interfaces establish and supplement autonomous reconfiguration capabilities. Area, speed and power optimization techniques are developed based on the developed Xilinx prototype. Evaluations and analysis of these prototype and techniques are performed on a number of benchmark and hashing algorithm case studies. The results indicate that based on a variety of test benches, up to 70% reduction in the resource utilization, up to 50% improvement in power consumption, and up to 10 times increase in run-time performance are achieved using the developed architecture and approaches compared with Xilinx baseline reconfiguration flow. Finally, a Genetic Algorithm (GA) for a FPGA fault tolerance case study is evaluated as a ultimate high-level application running on this architecture. It demonstrated that this is a hardware and software infrastructure that enables an FPGA to dynamically reconfigure itself efficiently under the control of a soft microprocessor core that is instantiated within the FPGA fabric. Such a system contributes to the observed benefits of intelligent control, fast reconfiguration, and low overhead

Study Of The Relationship Between Delta Delay And Adjacent Parallel Wire Length In 45 Nanometer Process Technology

Hierarchical design spans the complete framework of a design flow from Register Transfer Level (RTL), synthesis, place and route, timing closure and various other analyses before sign-off. Finer geometries and increasing interconnect density however have resulted signal integrity becoming the key issue for Deep Sub-Micron design. Post silicon bug due to noise and signal integrity can be prevented and fixed at early stage of the IC design cycle. The purpose of this research is to establish a preventive measurement for adjacent wire that can travel in parallel for 45nm technology. The intention is to ensure that a complex design can be delivered to the market with accurate, fast and trusted analysis and provide sign-off solution. Main approach is to conduct the relationship study between delta delay and adjacent parallel wire in 45 nanometer (nm) process technology and provide a preventive measurement to limit the adjacent wire can travel in parallel. The design is explored thoroughly to study the relationship between delay noise and adjacent parallel wire. The correlation is translated into an equation to estimate the delay noise produced with a certain length of adjacent parallel wire