Predictive Congestion Control Protocol for Wireless Sensor Networks

Available congestion control schemes, for example transport control protocol (TCP), when applied to wireless networks, result in a large number of packet drops, unfair scenarios and low throughputs with a significant amount of wasted energy due to retransmissions. To fully utilize the hop by hop feedback information, this paper presents a novel, decentralized, predictive congestion control (DPCC) for wireless sensor networks (WSN). The DPCC consists of an adaptive flow and adaptive back-off interval selection schemes that work in concert with energy efficient, distributed power control (DPC). The DPCC detects the onset of congestion using queue utilization and the embedded channel estimator algorithm in DPC that predicts the channel quality. Then, an adaptive flow control scheme selects suitable rate which is enforced by the newly proposed adaptive backoff interval selection scheme. An optional adaptive scheduling scheme updates weights associated with each packet to guarantee the weighted fairness during congestion. Closed-loop stability of the proposed hop-by-hop congestion control is demonstrated by using the Lyapunov-based approach. Simulation results show that the DPCC reduces congestion and improves performance over congestion detection and avoidance (CODA) [3] and IEEE 802.11 protocols

A Trust Based Congestion Aware Hybrid Ant Colony Optimization Algorithm for Energy Efficient Routing in Wireless Sensor Networks (TC-ACO)

Congestion is a problem of paramount importance in resource constrained Wireless Sensor Networks, especially for large networks, where the traffic loads exceed the available capacity of the resources. Sensor nodes are prone to failure and the misbehavior of these faulty nodes creates further congestion. The resulting effect is a degradation in network performance, additional computation and increased energy consumption, which in turn decreases network lifetime. Hence, the data packet routing algorithm should consider congestion as one of the parameters, in addition to the role of the faulty nodes and not merely energy efficient protocols. Unfortunately most of the researchers have tried to make the routing schemes energy efficient without considering congestion factor and the effect of the faulty nodes. In this paper we have proposed a congestion aware, energy efficient, routing approach that utilizes Ant Colony Optimization algorithm, in which faulty nodes are isolated by means of the concept of trust. The merits of the proposed scheme are verified through simulations where they are compared with other protocols.Comment: 6 pages, 5 figures and 2 tables (Conference Paper

A Trust Based Fuzzy Algorithm for Congestion Control in Wireless Multimedia Sensor Networks (TFCC)

Network congestion has become a critical issue for resource constrained Wireless Sensor Networks (WSNs), especially for Wireless Multimedia Sensor Networks (WMSNs)where large volume of multimedia data is transmitted through the network. If the traffic load is greater than the available capacity of the sensor network, congestion occurs and it causes buffer overflow, packet drop, deterioration of network throughput and quality of service (QoS). Again, the faulty nodes of the network also aggravate congestion by diffusing useless packets or retransmitting the same packet several times. This results in the wastage of energy and decrease in network lifetime. To address this challenge, a new congestion control algorithm is proposed in which the faulty nodes are identified and blocked from data communication by using the concept of trust. The trust metric of all the nodes in the WMSN is derived by using a two-stage Fuzzy inferencing scheme. The traffic flow from source to sink is optimized by implementing the Link State Routing Protocol. The congestion of the sensor nodes is controlled by regulating the rate of traffic flow on the basis of the priority of the traffic. Finally we compare our protocol with other existing congestion control protocols to show the merit of the work.Comment: 6 pages, 5 figures, conference pape

D2D-Based Grouped Random Access to Mitigate Mobile Access Congestion in 5G Sensor Networks

The Fifth Generation (5G) wireless service of sensor networks involves significant challenges when dealing with the coordination of ever-increasing number of devices accessing shared resources. This has drawn major interest from the research community as many existing works focus on the radio access network congestion control to efficiently manage resources in the context of device-to-device (D2D) interaction in huge sensor networks. In this context, this paper pioneers a study on the impact of D2D link reliability in group-assisted random access protocols, by shedding the light on beneficial performance and potential limitations of approaches of this kind against tunable parameters such as group size, number of sensors and reliability of D2D links. Additionally, we leverage on the association with a Geolocation Database (GDB) capability to assist the grouping decisions by drawing parallels with recent regulatory-driven initiatives around GDBs and arguing benefits of the suggested proposal. Finally, the proposed method is approved to significantly reduce the delay over random access channels, by means of an exhaustive simulation campaign.Comment: First submission to IEEE Communications Magazine on Oct.28.2017. Accepted on Aug.18.2019. This is the camera-ready versio

Publish/subscribe protocol in wireless sensor networks: improved reliability and timeliness

The rapidly-evolving demand of applications using wireless sensor networks in several areas such as building and industrial automation or smart cities, among other, makes it necessary to determine and provide QoS support mechanisms which can satisfy the requirements of applications. In this paper we propose a mechanism that establishes different QoS levels, based on Publish/Subscribe model for wireless networks to meet application requirements, to provide reliable delivery of packet and timeliness. The first level delivers packets in a best effort way. The second one intends to provide reliable packet delivery with a novel approach for Retransmission Timeout (RTO) calculation, which adjusts the RTO depending on the subscriber Packet Delivery Ratio (PDR). The third one provides the same reliable packet delivery as the second one, but in addition, it provides data aggregation trying to be efficient in terms of energy consumption and the use of network bandwidth. The last one provides timeliness in the packet delivery. We evaluate each QoS Level with several performance metrics such as PDR, Message Delivery Ratio, Duplicated and Retransmitted Packet Ratio and Packet Timeliness Ratio to demonstrate that our proposal provides significant improvements based on the increase of the PDR obtained.Peer ReviewedPostprint (author's final draft