Transcutaneous Measurement and SpectrumAnalysis of Heart Wall Vibrations

科研費報告書収録論文(課題番号:08555096・基盤研究(B)(2)・H8～H9/研究代表者:金井, 浩/心筋の早期診断を可能とする心臓壁微小振動の超音波計測及び解析装置の開発

MRI-based Biomechanical Modeling of Carotid Atherosclerotic Plaques

__Abstract__ Carotid atherosclerosis is a common cause of acute ischemic stroke and places a major burden on worldwide health-related quality of life. The currently-used stenosis-degree guidelines to decide on surgical intervention through carotid endarterectomy in order to prevent a future event are imperfect. This is because they insufficiently target plaque vulnerability. To provide an alternative carotid plaque vulnerability assessment, one can compute the biomechanical peak cap stress using noninvasive magnetic resonance imaging (MRI). In this dissertation, we used MRI simulations to assess the accuracy of plaque segmentation and stress analysis. We also investigated plaque elasticity estimation through combining inverse finite element analysis and ultrasound strain measurements. A comparison between peak cap stress and histological classification led to the finding that a reliable identification of thick-cap stable carotid plaques might be a more fruitful approach to reduce carotid surgeries on

Characterization of carotid artery plaques using noninvasive vascular ultrasound elastography

L'athérosclérose est une maladie vasculaire complexe qui affecte la paroi des artères (par l'épaississement) et les lumières (par la formation de plaques). La rupture d'une plaque de l'artère carotide peut également provoquer un accident vasculaire cérébral ischémique et des complications. Bien que plusieurs modalités d'imagerie médicale soient actuellement utilisées pour évaluer la stabilité d'une plaque, elles présentent des limitations telles que l'irradiation, les propriétés invasives, une faible disponibilité clinique et un coût élevé. L'échographie est une méthode d'imagerie sûre qui permet une analyse en temps réel pour l'évaluation des tissus biologiques. Il est intéressant et prometteur d’appliquer une échographie vasculaire pour le dépistage et le diagnostic précoces des plaques d’artère carotide. Cependant, les ultrasons vasculaires actuels identifient uniquement la morphologie d'une plaque en termes de luminosité d'écho ou l’impact de cette plaque sur les caractéristiques de l’écoulement sanguin, ce qui peut ne pas être suffisant pour diagnostiquer l’importance de la plaque. La technique d’élastographie vasculaire non-intrusive (« noninvasive vascular elastography (NIVE) ») a montré le potentiel de détermination de la stabilité d'une plaque. NIVE peut déterminer le champ de déformation de la paroi vasculaire en mouvement d’une artère carotide provoqué par la pulsation cardiaque naturelle. En raison des différences de module de Young entre les différents tissus des vaisseaux, différents composants d’une plaque devraient présenter différentes déformations, caractérisant ainsi la stabilité de la plaque. Actuellement, les performances et l’efficacité numérique sous-optimales limitent l’acceptation clinique de NIVE en tant que méthode rapide et efficace pour le diagnostic précoce des plaques vulnérables. Par conséquent, il est nécessaire de développer NIVE en tant qu’outil d’imagerie non invasif, rapide et économique afin de mieux caractériser la vulnérabilité liée à la plaque. La procédure à suivre pour effectuer l’analyse NIVE consiste en des étapes de formation et de post-traitement d’images. Cette thèse vise à améliorer systématiquement la précision de ces deux aspects de NIVE afin de faciliter la prédiction de la vulnérabilité de la plaque carotidienne. Le premier effort de cette thèse a été dédié à la formation d'images (Chapitre 5). L'imagerie par oscillations transversales a été introduite dans NIVE. Les performances de l’imagerie par oscillations transversales couplées à deux estimateurs de contrainte fondés sur un modèle de déformation fine, soit l’ « affine phase-based estimator (APBE) » et le « Lagrangian speckle model estimator (LSME) », ont été évaluées. Pour toutes les études de simulation et in vitro de ce travail, le LSME sans imagerie par oscillation transversale a surperformé par rapport à l'APBE avec imagerie par oscillations transversales. Néanmoins, des estimations de contrainte principales comparables ou meilleures pourraient être obtenues avec le LSME en utilisant une imagerie par oscillations transversales dans le cas de structures tissulaires complexes et hétérogènes. Lors de l'acquisition de signaux ultrasonores pour la formation d'images, des mouvements hors du plan perpendiculaire au plan de balayage bidimensionnel (2-D) existent. Le deuxième objectif de cette thèse était d'évaluer l'influence des mouvements hors plan sur les performances du NIVE 2-D (Chapitre 6). À cette fin, nous avons conçu un dispositif expérimental in vitro permettant de simuler des mouvements hors plan de 1 mm, 2 mm et 3 mm. Les résultats in vitro ont montré plus d'artefacts d'estimation de contrainte pour le LSME avec des amplitudes croissantes de mouvements hors du plan principal de l’image. Malgré tout, nous avons néanmoins obtenu des estimations de déformations robustes avec un mouvement hors plan de 2.0 mm (coefficients de corrélation supérieurs à 0.85). Pour un jeu de données cliniques de 18 participants présentant une sténose de l'artère carotide, nous avons proposé d'utiliser deux jeux de données d'analyses sur la même plaque carotidienne, soit des images transversales et longitudinales, afin de déduire les mouvements hors plan (qui se sont avérés de 0.25 mm à 1.04 mm). Les résultats cliniques ont montré que les estimations de déformations restaient reproductibles pour toutes les amplitudes de mouvement, puisque les coefficients de corrélation inter-images étaient supérieurs à 0.70 et que les corrélations croisées normalisées entre les images radiofréquences étaient supérieures à 0.93, ce qui a permis de démontrer une plus grande confiance lors de l'analyse de jeu de données cliniques de plaques carotides à l'aide du LSME. Enfin, en ce qui concerne le post-traitement des images, les algorithmes NIVE doivent estimer les déformations des parois des vaisseaux à partir d’images reconstituées dans le but d’identifier les tissus mous et durs. Ainsi, le dernier objectif de cette thèse était de développer un algorithme d'estimation de contrainte avec une résolution de la taille d’un pixel ainsi qu'une efficacité de calcul élevée pour l'amélioration de la précision de NIVE (Chapitre 7). Nous avons proposé un estimateur de déformation de modèle fragmenté (SMSE) avec lequel le champ de déformation dense est paramétré avec des descriptions de transformées en cosinus discret, générant ainsi des composantes de déformations affines (déformations axiales et latérales et en cisaillement) sans opération mathématique de dérivées. En comparant avec le LSME, le SMSE a réduit les erreurs d'estimation lors des tests de simulations, ainsi que pour les mesures in vitro et in vivo. De plus, la faible mise en oeuvre de la méthode SMSE réduit de 4 à 25 fois le temps de traitement par rapport à la méthode LSME pour les simulations, les études in vitro et in vivo, ce qui pourrait permettre une implémentation possible de NIVE en temps réel.Atherosclerosis is a complex vascular disease that affects artery walls (by thickening) and lumens (by plaque formation). The rupture of a carotid artery plaque may also induce ischemic stroke and complications. Despite the use of several medical imaging modalities to evaluate the stability of a plaque, they present limitations such as irradiation, invasive property, low clinical availability and high cost. Ultrasound is a safe imaging method with a real time capability for assessment of biological tissues. It is clinically used for early screening and diagnosis of carotid artery plaques. However, current vascular ultrasound technologies only identify the morphology of a plaque in terms of echo brightness or the impact of the vessel narrowing on flow properties, which may not be sufficient for optimum diagnosis. Noninvasive vascular elastography (NIVE) has been shown of interest for determining the stability of a plaque. Specifically, NIVE can determine the strain field of the moving vessel wall of a carotid artery caused by the natural cardiac pulsation. Due to Young’s modulus differences among different vessel tissues, different components of a plaque can be detected as they present different strains thereby potentially helping in characterizing the plaque stability. Currently, sub-optimum performance and computational efficiency limit the clinical acceptance of NIVE as a fast and efficient method for the early diagnosis of vulnerable plaques. Therefore, there is a need to further develop NIVE as a non-invasive, fast and low computational cost imaging tool to better characterize the plaque vulnerability. The procedure to perform NIVE analysis consists in image formation and image post-processing steps. This thesis aimed to systematically improve the accuracy of these two aspects of NIVE to facilitate predicting carotid plaque vulnerability. The first effort of this thesis has been targeted on improving the image formation (Chapter 5). Transverse oscillation beamforming was introduced into NIVE. The performance of transverse oscillation imaging coupled with two model-based strain estimators, the affine phase-based estimator (APBE) and the Lagrangian speckle model estimator (LSME), were evaluated. For all simulations and in vitro studies, the LSME without transverse oscillation imaging outperformed the APBE with transverse oscillation imaging. Nonetheless, comparable or better principal strain estimates could be obtained with the LSME using transverse oscillation imaging in the case of complex and heterogeneous tissue structures. During the acquisition of ultrasound signals for image formation, out-of-plane motions which are perpendicular to the two-dimensional (2-D) scan plane are existing. The second objective of this thesis was to evaluate the influence of out-of-plane motions on the performance of 2-D NIVE (Chapter 6). For this purpose, we designed an in vitro experimental setup to simulate out-of-plane motions of 1 mm, 2 mm and 3 mm. The in vitro results showed more strain estimation artifacts for the LSME with increasing magnitudes of out-of-plane motions. Even so, robust strain estimations were nevertheless obtained with 2.0 mm out-of-plane motion (correlation coefficients higher than 0.85). For a clinical dataset of 18 participants with carotid artery stenosis, we proposed to use two datasets of scans on the same carotid plaque, one cross-sectional and the other in a longitudinal view, to deduce the out-of-plane motions (estimated to be ranging from 0.25 mm to 1.04 mm). Clinical results showed that strain estimations remained reproducible for all motion magnitudes since inter-frame correlation coefficients were higher than 0.70, and normalized cross-correlations between radiofrequency images were above 0.93, which indicated that confident motion estimations can be obtained when analyzing clinical dataset of carotid plaques using the LSME. Finally, regarding the image post-processing component of NIVE algorithms to estimate strains of vessel walls from reconstructed images with the objective of identifying soft and hard tissues, we developed a strain estimation method with a pixel-wise resolution as well as a high computation efficiency for improving NIVE (Chapter 7). We proposed a sparse model strain estimator (SMSE) for which the dense strain field is parameterized with Discrete Cosine Transform descriptions, thereby deriving affine strain components (axial and lateral strains and shears) without mathematical derivative operations. Compared with the LSME, the SMSE reduced estimation errors in simulations, in vitro and in vivo tests. Moreover, the sparse implementation of the SMSE reduced the processing time by a factor of 4 to 25 compared with the LSME based on simulations, in vitro and in vivo results, which is suggesting a possible implementation of NIVE in real time

2-D and 3-D high frame-rate Pulse Wave Imaging for the characterization of focal vascular disease

Cardiovascular diseases are major causes of morbidity and mortality in Western-style populations. Atherosclerosis and Abdominal Aortic Aneurysms (AAAs) are two prevalent vascular diseases that may progress without symptoms and contribute to acute cardiovascular events such as stroke and AAA rupture, which are consistently among the leading causes of death worldwide. The imaging methods used in the diagnosis of these diseases, have been reported to present several limitations. Given that both are associated with mechanical changes in the arterial wall, imaging of the arterial mechanical properties may improve early disease detection and patient care. Pulse wave velocity (PWV) refers to the velocity at which arterial waves generated by ventricular ejection travel along the arterial tree. PWV is a surrogate marker of arterial stiffness linked to cardiovascular mortality. The foot-to-foot method that is typically used to calculate PWV suffers from errors of distance measurements and time-delay measurements. Additionally, a single PWV estimate is provided over a relatively long distance, thus inherently lacking the capability to provide regional arterial stiffness measurements. Pulse Wave Imaging (PWI) is a noninvasive, ultrasound-based technique for imaging the propagation of pulse waves along the wall of major arteries and providing a regional PWV value for the imaged artery. The aim of this work was to enable PWI to provide more localized PWV and stiffness measurements within the imaged arterial segment and to further extend it into a 2-D and 3-D technique for the detection and monitoring of focal vascular disease at high temporal and spatial resolution. The improved modality was integrated with blood flow imaging modalities aiming to render PWI a comprehensive methodology for the study of arterial biomechanics in vivo. Spatial information was increased with the introduction of piecewise PWI. This novel technique was used to measure PWV within small sub-regions of the imaged vessel in murine aneurysmal (n = 8) and atherosclerotic aortas (n = 11) in vivo. It provided PWV and stiffness maps while capturing the progressive arterial stiffening caused by atherosclerosis. PWI was further augmented with a sophisticated adaptive algorithm, enabling it to optimally partition the imaged artery into relatively homogeneous segments, automatically isolating arterial stiffness inhomogeneities. Adaptive PWI was validated in silicone phantoms consisting of segments of varying stiffness and then tested in murine aortas in vivo. Subsequently, the conventional tradeoff between spatial and temporal resolution was addressed with a plane wave compounding implementation of PWI, allowing the acquisition of full field of view frames at over 2000 Hz. A GPU-accelerated PWI post-processing framework was developed for the processing of the big bulk of generated data. The parameters of coherent compounding were optimized in vivo. The optimized sequences were then used in the clinic to assess the mechanical properties of atherosclerotic carotids (n=10) and carotids of patients after endarterectomy (n=7), a procedure to remove the plaque and restore blood flow to the brain. In the case of atherosclerotic patients undergoing carotid endarterectomy, the results were compared against the histology of the excised plaques. Investigation of the mechanical properties of plaques was also conducted for the first time with a high-frequency transducer (18.5 MHz). Additionally, 4-D PWI was introduced, utilizing high frame rate 3-D plane wave acquisitions with a 2-D matrix array transducer (16x16 elements, 2.5 MHz). A novel methodology for PWV estimation along the direction of pulse wave propagation was implemented and validated in silicone phantoms. 4-D PWI provided comprehensive views of the pulse wave propagation in a plaque phantom and the results were compared against conventional PWI. Finally, its feasibility was tested in the carotid arteries of healthy human subjects (n=6). PWVs derived in 3-D were within the physiological range and showed good agreement with the results of conventional PWI. Finally, PWI was integrated with flow imaging modalities (Color and Vector Doppler). Thus, full field-of-view, high frame-rate, simultaneous and co-localized imaging of the arterial wall dynamics and color flow as well as 2-D vector flow was implemented. The feasibility of both techniques was tested in healthy subjects (n=6) in vivo. The relationship between the timings of the flow and wall velocities was investigated at multiple locations of the imaged artery. Vector flow velocities were found to be aligned with the vessel’s centerline during peak systole in the common carotid artery and interesting flow patterns were revealed in the case of the carotid bifurcation Consequently, with the aforementioned improvements and the inclusion of 3-D imaging, PWI is expected to provide comprehensive information on the mechanical properties of pathological arteries, providing clinicians with a powerful tool for the early detection of vascular abnormalities undetectable on the B-mode, while also enabling the monitoring of fully developed vascular pathology and of the recovery of post-operated vessels

Methods and Algorithms for Cardiovascular Hemodynamics with Applications to Noninvasive Monitoring of Proximal Blood Pressure and Cardiac Output Using Pulse Transit Time

Advanced health monitoring and diagnostics technology are essential to reduce the unrivaled number of human fatalities due to cardiovascular diseases (CVDs). Traditionally, gold standard CVD diagnosis involves direct measurements of the aortic blood pressure (central BP) and flow by cardiac catheterization, which can lead to certain complications. Understanding the inner-workings of the cardiovascular system through patient-specific cardiovascular modeling can provide new means to CVD diagnosis and relating treatment. BP and flow waves propagate back and forth from heart to the peripheral sites, while carrying information about the properties of the arterial network. Their speed of propagation, magnitude and shape are directly related to the properties of blood and arterial vasculature. Obtaining functional and anatomical information about the arteries through clinical measurements and medical imaging, the digital twin of the arterial network of interest can be generated. The latter enables prediction of BP and flow waveforms along this network. Point of care devices (POCDs) can now conduct in-home measurements of cardiovascular signals, such as electrocardiogram (ECG), photoplethysmogram (PPG), ballistocardiogram (BCG) and even direct measurements of the pulse transit time (PTT). This vital information provides new opportunities for designing accurate patient-specific computational models eliminating, in many cases, the need for invasive measurements. One of the main efforts in this area is the development of noninvasive cuffless BP measurement using patient’s PTT. Commonly, BP prediction is carried out with regression models assuming direct or indirect relationships between BP and PTT. However, accounting for the nonlinear FSI mechanics of the arteries and the cardiac output is indispensable. In this work, a monotonicity-preserving quasi-1D FSI modeling platform is developed, capable of capturing the hyper-viscoelastic vessel wall deformation and nonlinear blood flow dynamics in arbitrary arterial networks. Special attention has been dedicated to the correct modeling of discontinuities, such as mechanical properties mismatch associated with the stent insertion, and the intertwining dynamics of multiscale 3D and 1D models when simulating the arterial network with an aneurysm. The developed platform, titled Cardiovascular Flow ANalysis (CardioFAN), is validated against well-known numerical, in vitro and in vivo arterial network measurements showing average prediction errors of 5.2%, 2.8% and 1.6% for blood flow, lumen cross-sectional area, and BP, respectively. CardioFAN evaluates the local PTT, which enables patient-specific calibration and its application to input signal reconstruction. The calibration is performed based on BP, stroke volume and PTT measured by POCDs. The calibrated model is then used in conjunction with noninvasively measured peripheral BP and PTT to inversely restore the cardiac output, proximal BP and aortic deformation in human subjects. The reconstructed results show average RMSEs of 1.4% for systolic and 4.6% for diastolic BPs, as well as 8.4% for cardiac output. This work is the first successful attempt in implementation of deterministic cardiovascular models as add-ons to wearable and smart POCD results, enabling continuous noninvasive monitoring of cardiovascular health to facilitate CVD diagnosis

Human retinal oximetry using hyperspectral imaging

The aim of the work reported in this thesis was to investigate the possibility of measuring human retinal oxygen saturation using hyperspectral imaging. A direct non-invasive quantitative mapping of retinal oxygen saturation is enabled by hyperspectral imaging whereby the absorption spectra of oxygenated and deoxygenated haemoglobin are recorded and analysed. Implementation of spectral retinal imaging thus requires ophthalmic instrumentation capable of efficiently recording the requisite spectral data cube. For this purpose, a spectral retinal imager was developed for the first time by integrating a liquid crystal tuneable filter into the illumination system of a conventional fundus camera to enable the recording of narrow-band spectral images in time sequence from 400nm to 700nm. Postprocessing algorithms were developed to enable accurate exploitation of spectral retinal images and overcome the confounding problems associated with this technique due to the erratic eye motion and illumination variation. Several algorithms were developed to provide semi-quantitative and quantitative oxygen saturation measurements. Accurate quantitative measurements necessitated an optical model of light propagation into the retina that takes into account the absorption and scattering of light by red blood cells. To validate the oxygen saturation measurements and algorithms, a model eye was constructed and measurements were compared with gold-standard measurements obtained by a Co-Oximeter. The accuracy of the oxygen saturation measurements was (3.31%± 2.19) for oxygenated blood samples. Clinical trials from healthy and diseased subjects were analysed and oxygen saturation measurements were compared to establish a merit of certain retinal diseases. Oxygen saturation measurements were in agreement with clinician expectations in both veins (48%±9) and arteries (96%±5). We also present in this thesis the development of novel clinical instrument based on IRIS to perform retinal oximetry.Al-baath University, Syri

Respiratory organ motion in interventional MRI : tracking, guiding and modeling

Respiratory organ motion is one of the major challenges in interventional MRI, particularly in interventions with therapeutic ultrasound in the abdominal region. High-intensity focused ultrasound found an application in interventional MRI for noninvasive treatments of different abnormalities. In order to guide surgical and treatment interventions, organ motion imaging and modeling is commonly required before a treatment start. Accurate tracking of organ motion during various interventional MRI procedures is prerequisite for a successful outcome and safe therapy. In this thesis, an attempt has been made to develop approaches using focused ultrasound which could be used in future clinically for the treatment of abdominal organs, such as the liver and the kidney. Two distinct methods have been presented with its ex vivo and in vivo treatment results. In the first method, an MR-based pencil-beam navigator has been used to track organ motion and provide the motion information for acoustic focal point steering, while in the second approach a hybrid imaging using both ultrasound and magnetic resonance imaging was combined for advanced guiding capabilities. Organ motion modeling and four-dimensional imaging of organ motion is increasingly required before the surgical interventions. However, due to the current safety limitations and hardware restrictions, the MR acquisition of a time-resolved sequence of volumetric images is not possible with high temporal and spatial resolution. A novel multislice acquisition scheme that is based on a two-dimensional navigator, instead of a commonly used pencil-beam navigator, was devised to acquire the data slices and the corresponding navigator simultaneously using a CAIPIRINHA parallel imaging method. The acquisition duration for four-dimensional dataset sampling is reduced compared to the existing approaches, while the image contrast and quality are improved as well. Tracking respiratory organ motion is required in interventional procedures and during MR imaging of moving organs. An MR-based navigator is commonly used, however, it is usually associated with image artifacts, such as signal voids. Spectrally selective navigators can come in handy in cases where the imaging organ is surrounding with an adipose tissue, because it can provide an indirect measure of organ motion. A novel spectrally selective navigator based on a crossed-pair navigator has been developed. Experiments show the advantages of the application of this novel navigator for the volumetric imaging of the liver in vivo, where this navigator was used to gate the gradient-recalled echo sequence