Accelerator Memory Reuse in the Dark Silicon Era

Accelerators integrated on-die with General-Purpose CPUs (GP-CPUs) can yield significant performance and power improvements. Their extensive use, however, is ultimately limited by their area overhead; due to their high degree of specialization, the opportunity cost of investing die real estate on accelerators can become prohibitive, especially for general-purpose architectures. In this paper we present a novel technique aimed at mitigating this opportunity cost by allowing GP-CPU cores to reuse accelerator memory as a non-uniform cache architecture (NUCA) substrate. On a system with a last level-2 cache of 128kB, our technique achieves on average a 25% performance improvement when reusing four 512 kB accelerator memory blocks to form a level-3 cache. Making these blocks reusable as NUCA slices incurs on average in a 1.89% area overhead with respect to equally-sized ad hoc cache slice

Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

C-AMTE: A location mechanism for flexible cache management in chip multiprocessors

This paper describes Constrained Associative-Mapping-of-Tracking-Entries (C-AMTE), a scalable mechanism to facilitate flexible and efficient distributed cache management in large-scale chip multiprocessors (CMPs). C-AMTE enables fast locating of cache blocks in CMP cache schemes that employ one-to-one or one-to-many associative mappings. C-AMTE stores in per-core data structures tracking entries to avoid on-chip interconnect traffic outburst or long distance directory lookups. Simulation results using a full system simulator demonstrate that C-AMTE achieves improvement in cache access latency by up to 34.4%, close to that of a perfect location strategy. © 2010 Elsevier Inc. All rights reserved

LRU-PEA: A smart replacement policy for non-uniform cache architectures on chip multiprocessors

The increasing speed-gap between processor and memory and the limited memory bandwidth make last-level cache performance crucial for CMP architectures. Non Uniform Cache Architectures (NUCA) has been introduced to deal with this problem. This memory organization divides the whole memory space into smaller pieces or banks allowing nearer banks to have better access latencies than further banks.Moreover, an adaptive replacement policy that efficiently reduces misses in the last-level cache could boost performance, particularly if set associativity is assumed. Unfortunately, traditional replacement policies do not behave properly as they were assumed for single-processors. This paper focuses on Bank Replacement. This policy involves three key decisions when there is a miss: where to place a data within the cache set, which data to evict from the cache set and finally, where to place the evicted data. We propose a novel replacement technique that enables more intelligent replacement decisions to be taken, based on the observation that some type of data are less commonly accessed depending of the bank where they reside. We call this technique as LRU-PEA (Least Recently Used with a Priority Eviction Approach). We show that the proposed technique significantly reduces the requests to the off-chip memory by increasing the hit ratio in the NUCA cache. This translates into an average IPC improvement of 8% and into an Energy per Instruction (EPI) reduction of 5%.Preprin

Last Bank: dealing with address reuse in non-uniform cache architecture for CMPs

In response to the constant increase in wire delays, Non-Uniform Cache Architecture (NUCA) has been introduced as an effective memory model for dealing with growing memory latencies. This architecture divides a large memory cache into smaller banks that can be accessed independently. Banks close to the cache controller therefore have a faster response time than banks located farther away from it. In this paper, we propose and analyse the insertion of an additional bank into the NUCA cache. This is called Last Bank. This extra bank deals with data blocks that have been evicted from the other banks in the NUCA cache. Furthermore, we analyse the behaviour of the cache line replacements done in the NUCA cache and propose two optimisations of Last Bank that provide significant performance benefits without incurring unaffordable implementation costs.Preprin

Jigsaw: Scalable software-defined caches

Shared last-level caches, widely used in chip-multi-processors (CMPs), face two fundamental limitations. First, the latency and energy of shared caches degrade as the system scales up. Second, when multiple workloads share the CMP, they suffer from interference in shared cache accesses. Unfortunately, prior research addressing one issue either ignores or worsens the other: NUCA techniques reduce access latency but are prone to hotspots and interference, and cache partitioning techniques only provide isolation but do not reduce access latency.United States. Defense Advanced Research Projects Agency (DARPA PERFECT contract HR0011-13-2-0005)Quanta Computer (Firm

Scaling Distributed Cache Hierarchies through Computation and Data Co-Scheduling

Cache hierarchies are increasingly non-uniform, so for systems to scale efficiently, data must be close to the threads that use it. Moreover, cache capacity is limited and contended among threads, introducing complex capacity/latency tradeoffs. Prior NUCA schemes have focused on managing data to reduce access latency, but have ignored thread placement; and applying prior NUMA thread placement schemes to NUCA is inefficient, as capacity, not bandwidth, is the main constraint. We present CDCS, a technique to jointly place threads and data in multicores with distributed shared caches. We develop novel monitoring hardware that enables fine-grained space allocation on large caches, and data movement support to allow frequent full-chip reconfigurations. On a 64-core system, CDCS outperforms an S-NUCA LLC by 46% on average (up to 76%) in weighted speedup and saves 36% of system energy. CDCS also outperforms state-of-the-art NUCA schemes under different thread scheduling policies.National Science Foundation (U.S.) (Grant CCF-1318384)Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science (Jacobs Presidential Fellowship)United States. Defense Advanced Research Projects Agency (PERFECT Contract HR0011-13-2-0005

Jenga: Harnessing Heterogeneous Memories through Reconfigurable Cache Hierarchies

Conventional memory systems are organized as a rigid hierarchy, with multiple levels of progressively larger and slower memories. Hierarchy allows a simple, fixed design to benefit a wide range of applications, because working sets settle at the smallest (and fastest) level they fit in. However, rigid hierarchies also cause significant overheads, because each level adds latency and energy even when it does not capture the working set. In emerging systems with heterogeneous memory technologies such as stacked DRAM, these overheads often limit performance and efficiency. We propose Jenga, a reconfigurable cache hierarchy that avoids these pathologies and approaches the performance of a hierarchy optimized for each application. Jenga monitors application behavior and dynamically builds virtual cache hierarchies out of heterogeneous, distributed cache banks. Jenga uses simple hardware support and a novel software runtime to configure virtual cache hierarchies. On a 36-core CMP with a 1 GB stacked-DRAM cache, Jenga outperforms a combination of state-of-the-art techniques by 10% on average and by up to 36%, and does so while saving energy, improving system-wide energy-delay product by 29% on average and by up to 96%