Switching Equipment Location/Allocation in hybrid PONs

Our research goal is to investigate the FTTX (Fiber-to-the Home/Premises/Curb) passive optical network (PON) for the deployment of BISAN (Broadband Internet Subscriber Access Network) to exploit the opportunities of optical fiber enabled technologies as well as of passive switching equipment. Indeed, the deployment of FTTX PON is the most OPEX-friendly scenario, because it allows for completely passive access networks through minimizing the number of active components in the network. Previously, most FTTX PON architectures are designed based on the principle of either time division multiplexing (TDM) technology or wavelength division multiplexing (WDM) technology. We focus on designing the best possible architectures of FTTX PON, specifically hybrid PONs, which embraces both TDM and WDM technology. A hybrid PON architecture is very efficient as it is not limited to any specific PON technology, rather it is flexible enough to deploy TDM/WDM technology depending on the type (i.e unicast/multicast) and amount of traffic demand of the end-users. The advantages of a hybrid PON are of two folds: (i) it can offer increased data rate to each user by employing WDM technology, (ii) it can provide flexible bandwidth utilization by employing TDM technology. In this thesis, we concentrate on determining the optimized covering of a geographical area by a set of cost-effective hybrid PONs. We also focus on the greenfield deployment of a single hybrid PON. It should be worthy to mention that while investigating the deployment of hybrid PONs, the research community around the world considers the specifications of either the physical layer or the optical layer. But an efficient planning for PON deployment should take into account the constraints of the physical and optical layers in order that both layers can work together harmoniously. We concentrate our research on the network dimensioning and the selection as well as the placement of the switching equipment in hybrid PONs with the intention of considering the constraints of both physical and optical layers. We determine the layout of an optimized PON architecture while provisioning wavelengths in a hybrid PON. We also propose to select the switching equipment depending on the type (unicast/multicast) of traffic demand. Finally, we determine the best set of hybrid PONs along with their cascading architecture, type and location of their switching equipment while satisfying the network design constraints such as the number of output ports of the switching equipment and maximum allowed signal power loss experienced at each end user’s premises. In this thesis, we propose two novel schemes for the greenfield deployment of a single hybrid PON. The first scheme consists of two phases in which a heuristic algorithm and a novel column generation (CG) based integer linear programming (ILP) optimization model are proposed in the 1st and 2nd phase respectively. In the second scheme, a novel integrated CG based ILP cross layer optimization model is proposed for the designing of a single hybrid PON. We also propose two novel schemes to deal with the greenfield deployment of multiple hybrid PONs in a given geographical area. These two schemes determine the best set of cost-effective hybrid PONs in order to serve all the end users in a given neighborhood. The first scheme executes in four phases in which two heuristic algorithms, a CG based ILP model and an ILP optimization model are proposed in the 1st, 2nd, 3rd and 4th phase respectively. In the second scheme, an ILP model as well as a CG based ILP model, another ILP model as well as another CG based ILP model, a CG based ILP model and an ILP optimization model are proposed during four consecutive phases. Our proposed scheme can optimize the design of a set of hybrid PONs covering a given geographic area as well as the selection of the best cascading architecture 1/2/mixedstage) for each selected PON. It minimizes the overall network deployment cost based on the location of the OLT and the ONUs while granting all traffic demands. The scheme emphasizes on the optimum placement of equipment in a hybrid PON infrastructure due to the critical dependency between the network performances and a proper deployment of its equipment, which, in turn depends on the locations of the users. It is a quite powerful scheme as it can handle data instances with up to several thousands ONUs. On the basis of the computational results, the proposed scheme leads to an efficient automated tool for network design, planning, and performance evaluation which can be beneficial for the network designers

Power minimization and optimum ONU placements in integrated wireless optical access networks

The deployment of optical fibre in place of copper cable in access networks has experienced remarkable growth over the past several years due to a wide range of benefits. A major benefit of optical fibre over copper cable is that it is more secure and immune to electromagnetic interferences. Optical fibre has also provided the capability of handling higher throughputs for longer distances, and experiences no crosstalk between other fibre optic cables. However, the last mile reach to end-users with optical fibre is very costly. This alternative replacement results in increased costs for manual labour and energy consumption in the access network. The current demand in all areas of telecommunications, and especially access networks, is greener networking. In order to offset the high costs of optical access implementations and to satisfy this demand, an investigation into integrated wireless optical access networks (IWOAN) is warranted. The proliferation of wireless devices has also motivated the interest in IWOAN as it combines the flexibility and efficiency of wireless with the security and stability provided by optical. With the emergence of smart phones and tablets, wireless access networks are now supporting an increasing amount of traffic volume with improved throughput and accessibility. We employ a Passive Optical Network (PON) infrastructure from the central office to the customer, traced from the Optical Line Terminal (OLT) to the customer premises devices known as Optical Network Units (ONUs) for IWOAN. At the ONU, the optical fibre is terminated and wireless communication is implemented. The ONU acts as a wireless access point/gateway for wireless Base Stations (BS) serving different coverage areas in point-to-point topology. With recent trends of advanced wireless technologies, premium rich applications such as multimedia streaming, interactive gaming and cloud computing are delivered in a satisfactory and economic way. This wireless-optical integration aims to reduce and solve the cost of replacing copper cables. However, another issue is raised with increased costs in energy consumption due to the integration of wireless and optical communication. Typically a large number of ONUs need to be deployed in order to serve many wireless BSs located in different coverage areas. As a result, any cost savings gained by the integration process is exhausted with the increased cost of power consumption

DYNAMIC ROUTING WITH CROSS-LAYER ADAPTATIONS FOR MULTI-HOP WIRELESS NETWORKS

In recent years there has been a proliferation of research on a number of wireless multi-hop networks that include mobile ad-hoc networks, wireless mesh networks, and wireless sensor networks (WSNs). Routing protocols in such networks are of- ten required to meet design objectives that include a combination of factors such as throughput, delay, energy consumption, network lifetime etc. In addition, many mod- ern wireless networks are equipped with multi-channel radios, where channel selection plays an important role in achieving the same design objectives. Consequently, ad- dressing the routing problem together with cross-layer adaptations such as channel selection is an important issue in such networks. In this work, we study the joint routing and channel selection problem that spans two domains of wireless networks. The first is a cost-effective and scalable wireless-optical access networks which is a combination of high-capacity optical access and unethered wireless access. The joint routing and channel selection problem in this case is addressed under an anycasting paradigm. In addition, we address two other problems in the context of wireless- optical access networks. The first is on optimal gateway placement and network planning for serving a given set of users. And the second is the development of an analytical model to evaluate the performance of the IEEE 802.11 DCF in radio-over- fiber wireless LANs. The second domain involves resource constrained WSNs where we focus on route and channel selection for network lifetime maximization. Here, the problem is further exacerbated by distributed power control, that introduces addi- tional design considerations. Both problems involve cross-layer adaptations that must be solved together with routing. Finally, we present an analytical model for lifetime calculation in multi-channel, asynchronous WSNs under optimal power control

Modeling and Optimization of Next-Generation Wireless Access Networks

The ultimate goal of the next generation access networks is to provide all network users, whether they are fixed or mobile, indoor or outdoor, with high data rate connectivity, while ensuring a high quality of service. In order to realize this ambitious goal, delay, jitter, error rate and packet loss should be minimized: a goal that can only be achieved through integrating different technologies, including passive optical networks, 4th generation wireless networks, and femtocells, among others. This thesis focuses on medium access control and physical layers of future networks. In this regard, the first part of this thesis discusses techniques to improve the end-to-end quality of service in hybrid optical-wireless networks. In these hybrid networks, users are connected to a wireless base station that relays their data to the core network through an optical connection. Hence, by integrating wireless and optical parts of these networks, a smart scheduler can predict the incoming traffic to the optical network. The prediction data generated herein is then used to propose a traffic-aware dynamic bandwidth assignment algorithm for reducing the end-to-end delay. The second part of this thesis addresses the challenging problem of interference management in a two-tier macrocell/femtocell network. A high quality, high speed connection for indoor users is ensured only if the network has a high signal to noise ratio. A requirement that can be fulfilled with using femtocells in cellular networks. However, since femtocells generate harmful interference to macrocell users in proximity of them, careful analysis and realistic models should be developed to manage the introduced interference. Thus, a realistic model for femtocell interference outside suburban houses is proposed and several performance measures, e.g., signal to interference and noise ratio and outage probability are derived mathematically for further analysis. The quality of service of cellular networks can be degraded by several factors. For example, in industrial environments, simultaneous fading and strong impulsive noise significantly deteriorate the error rate performance. In the third part of this thesis, a technique to improve the bit error rate of orthogonal frequency division multiplexing systems in industrial environments is presented. This system is the most widely used technology in next-generation networks, and is very susceptible to impulsive noise, especially in fading channels. Mathematical analysis proves that the proposed method can effectively mitigate the degradation caused by impulsive noise and significantly improve signal to interference and noise ratio and bit error rate, even in frequency-selective fading channels

Optimizing resource allocation in next-generation optical access networks

To meet rapidly increasing traffic demands caused by the popularization of Internet and the spouting of bandwidth-demanding applications, Passive Optical Networks (PONs) exploit the potential capacities of optical fibers, and are becoming promising future-proof access network technologies. On the other hand, for a broader coverage area and higher data rate, integrated optical and wireless access is becoming a future trend for wireless access. This thesis investigates three next-generation access networks: Time Division Multiplexing (TDM) PONs, Wavelength Division Multiplexing (WDM) PONs, and WDM Radio-Over-Fiber (RoF) Picocellular networks. To address resource allocation problems in these three networks, this thesis first investigates respective characteristics of these networks, and then presents solutions to address respective challenging problems in these networks. In particular, three main problems are addressed: arbitrating time allocation among different applications to guarantee user quality of experience (QoE) in TDM PONs, scheduling wavelengths optimally in WDM PONs, and jointly allocating fiber and radio resources in WDM RoF Picocellular networks. In-depth theoretical analysis and extensive simulations have been performed in evaluating and demonstrating the performances of the proposed schemes

Enabling Technology in Optical Fiber Communications: From Device, System to Networking

This book explores the enabling technology in optical fiber communications. It focuses on the state-of-the-art advances from fundamental theories, devices, and subsystems to networking applications as well as future perspectives of optical fiber communications. The topics cover include integrated photonics, fiber optics, fiber and free-space optical communications, and optical networking