Machine-learning-based condition assessment of gas turbine: a review

Condition monitoring, diagnostics, and prognostics are key factors in today’s competitive industrial sector. Equipment digitalisation has increased the amount of available data throughout the industrial process, and the development of new and more advanced techniques has significantly improved the performance of industrial machines. This publication focuses on surveying the last decade of evolution of condition monitoring, diagnostic, and prognostic techniques using machinelearning (ML)-based models for the improvement of the operational performance of gas turbines. A comprehensive review of the literature led to a performance assessment of ML models and their applications to gas turbines, as well as a discussion of the major challenges and opportunities for the research on these kind of engines. This paper further concludes that the combination of the available information captured through the collectors and the ML techniques shows promising results in increasing the accuracy, robustness, precision, and generalisation of industrial gas turbine equipment.This research was funded by Siemens Energy.Peer ReviewedPostprint (published version

Real-time fault identification for developmental turbine engine testing

Hundreds of individual sensors produce an enormous amount of data during developmental turbine engine testing. The challenge is to ensure the validity of the data and to identify data and engine anomalies in a timely manner. An automated data validation, engine condition monitoring, and fault identification process that emulates typical engineering techniques has been developed for developmental engine testing.An automated data validation and fault identification approach employing enginecycle-matching principles is described. Engine cycle-matching is automated by using an adaptive nonlinear component-level computer model capable of simulating both steady state and transient engine operation. Automated steady-state, transient, and real-time model calibration processes are also described. The model enables automation of traditional data validation, engine condition monitoring, and fault identification procedures. A distributed parallel computing approach enables the entire process to operate in real-time.The result is a capability to detect data and engine anomalies in real-time during developmental engine testing. The approach is shown to be successful in detecting and identifying sensor anomalies as they occur and distinguishing these anomalies from variations in component and overall engine aerothermodynamic performance. The component-level model-based engine performance and fault identification technique of the present research is capable of: identifying measurement errors on the order of 0.5 percent (e.g., sensor bias, drift,level shift, noise, or poor response) in facility fuel flow, airflow, and thrust measurements; identifying measurement errors in engine aerothermodynamic measurements (rotorspeeds, gas path pressures and temperatures); identifying measurement errors in engine control sensors (e.g., leaking/biased pressure sensor, slowly responding pressure measurement) and variable geometry rigging (e.g., misset guide vanes or nozzle area) that would invalidate a test or series of tests; identifying abrupt faults (e.g., faults due to domestic object damage, foreign object damage, and control anomalies); identifying slow faults (e.g., component or overall engine degradation, and sensor drift). Specifically, the technique is capable of identifying small changes in compressor (or fan) performance on the order of 0.5 percent; and being easily extended to diagnose secondary failure modes and to verify any modeling assumptions that may arise for developmental engine tests (e.g., increase in turbine flow capacity, inaccurate measurement of facility bleed flows, horsepower extraction, etc.).The component-level model-based engine performance and fault identification method developed in the present work brings together features which individually and collectively advance the state-of-the-art. These features are separated into three categories: advancements to effectively quantify off-nominal behavior, advancements to provide a fault detection capability that is practical from the viewpoint of the analysis,implementation, tuning, and design, and advancements to provide a real-time fault detection capability that is reliable and efficient

Fault diagnostics for advanced cycle marine gas turbine using genetic algorithm

The major challenges faced by the gas turbine industry, for both the users and the manufacturers, is the reduction in life cycle costs , as well as the safe and efficient running of gas turbines. In view of the above, it would be advantageous to have a diagnostics system capable of reliably detecting component faults (even though limited to gas path components) in a quantitative marmer. V This thesis presents the development an integrated fault diagnostics model for identifying shifts in component performance and sensor faults using advanced concepts in genetic algorithm. The diagnostics model operates in three distinct stages. The rst stage uses response surfaces for computing objective functions to increase the exploration potential of the search space while easing the computational burden. The second stage uses the heuristics modification of genetics algorithm parameters through a master-slave type configuration. The third stage uses the elitist model concept in genetic algorithm to preserve the accuracy of the solution in the face of randomness. The above fault diagnostics model has been integrated with a nested neural network to form a hybrid diagnostics model. The nested neural network is employed as a pre- processor or lter to reduce the number of fault classes to be explored by the genetic algorithm based diagnostics model. The hybrid model improves the accuracy, reliability and consistency of the results obtained. In addition signicant improvements in the total run time have also been observed. The advanced cycle Intercooled Recuperated WR2l engine has been used as the test engine for implementing the diagnostics model.SOE Prize winne

Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review

With the privatization and intense competition that characterize the volatile energy sector, the gas turbine industry currently faces new challenges of increasing operational flexibility, reducing operating costs, improving reliability and availability while mitigating the environmental impact. In this complex, changing sector, the gas turbine community could address a set of these challenges by further development of high fidelity, more accurate and computationally efficient engine health assessment, diagnostic and prognostic systems. Recent studies have shown that engine gas-path performance monitoring still remains the cornerstone for making informed decisions in operation and maintenance of gas turbines. This paper offers a systematic review of recently developed engine performance monitoring, diagnostic and prognostic techniques. The inception of performance monitoring and its evolution over time, techniques used to establish a high-quality dataset using engine model performance adaptation, and effects of computationally intelligent techniques on promoting the implementation of engine fault diagnosis are reviewed. Moreover, recent developments in prognostics techniques designed to enhance the maintenance decision-making scheme and main causes of gas turbine performance deterioration are discussed to facilitate the fault identification module. The article aims to organize, evaluate and identify patterns and trends in the literature as well as recognize research gaps and recommend new research areas in the field of gas turbine performance-based monitoring. The presented insightful concepts provide experts, students or novice researchers and decision-makers working in the area of gas turbine engines with the state of the art for performance-based condition monitoring

Benchmarking Gas Path Diagnostic Methods: A Public Approach

Recent technology reviews have identified the need for objective assessments of engine health management (EHM) technology. The need is two-fold: technology developers require relevant data and problems to design and validate new algorithms and techniques while engine system integrators and operators need practical tools to direct development and then evaluate the effectiveness of proposed solutions. This paper presents a publicly available gas path diagnostic benchmark problem that has been developed by the Propulsion and Power Systems Panel of The Technical Cooperation Program (TTCP) to help address these needs. The problem is coded in MATLAB (The MathWorks, Inc.) and coupled with a non-linear turbofan engine simulation to produce "snap-shot" measurements, with relevant noise levels, as if collected from a fleet of engines over their lifetime of use. Each engine within the fleet will experience unique operating and deterioration profiles, and may encounter randomly occurring relevant gas path faults including sensor, actuator and component faults. The challenge to the EHM community is to develop gas path diagnostic algorithms to reliably perform fault detection and isolation. An example solution to the benchmark problem is provided along with associated evaluation metrics. A plan is presented to disseminate this benchmark problem to the engine health management technical community and invite technology solutions

Robust sensor fault detection and isolation of gas turbine engines

An effective fault detection and isolation (FDI) technology can play a crucial role in improving the system availability, safety and reliability as well as reducing the risks of catastrophic failures. In this thesis, the robust sensor FDI problem of gas turbine engines is investigated and different novel techniques are developed to address the effects of parameter uncertainties, disturbances as well as process and measurement noise on the performance of FDI strategies. The efficiencies of proposed techniques are investigated through extensive simulation studies for the single spool gas turbine engine that is previously developed and validated using the GSP software. The gas turbine engine health degradation is considered in various forms in this thesis. First, it is considered as a part of the engine dynamics that is estimated off-line and updated periodically for the on-board engine model. Second, it is modeled as the time-varying norm-bounded parameter uncertainty that affects all the system state-space matrices and third as an unknown nonlinear dynamic that is approximated by the use of a dynamic recurrent neural network. In the first part of the thesis, we propose a hybrid Kalman filter (HKF) scheme that consists of a single nonlinear on-board engine model (OBEM) augmented with piecewise linear (PWL) models constituting as the multiple model (MM) based estimators to cover the entire engine operating regime. We have integrated the generalized likelihood ratio (GLR)-based method with our MM-based scheme to estimate the sensor fault severity under various single and concurrent fault scenarios. In order to ensure the reliability of our proposed HKF-based FDI scheme during the engine life cycle, it is assumed that the reference baselines are periodically updated for the OBEM health parameters. In the second part of the thesis, a novel robust sensor FDI strategy using the MM-based approach is proposed that remains robust with respect to both time-varying parameter uncertainties and process and measurement noise. The scheme is composed of robust Kalman filters (RKF) that are constructed for multiple PWL models. The parameter uncertainty is modeled by using a time-varying norm bounded admissible structure that affects all the PWL state space matrices. The robust Kalman filter gain matrices are designed by solving two algebraic Riccati equations (ARE) that are expressed as two linear matrix inequality (LMI) feasibility conditions. The main objective is to propose a robust filter that satisfies the overall performance requirements and is not affected by system perturbations. The requirements include a quadratically stable filter that ensures bounded estimation error variances having predefined values. In the third part of the thesis, a novel hybrid approach is proposed to improve the robustness of FDI scheme with respect to different sources of uncertainties. For this purpose, a dynamic recurrent neural network (DRNN) is designed to approximate the gas turbine engine uncertainty due to the health degradations. The proposed DRNN is trained offline by using the extended Kalman filter (EKF) algorithm for an engine with different levels of uncertainty, but with healthy sensors. The convergence of EKF-based DRNN training algorithm is also investigated. Then, the trained DRNN with the fixed parameters and topology is integrated with our online model-based FDI algorithm to approximate the uncertainty terms of the real engine. In this part, the previously proposed HKF and RKF are integrated with the trained DRNN to construct the hybrid FDI structure

Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes

The book documents 25 papers collected from the Special Issue “Advances in Condition Monitoring, Optimization and Control for Complex Industrial Processes”, highlighting recent research trends in complex industrial processes. The book aims to stimulate the research field and be of benefit to readers from both academic institutes and industrial sectors

Model-based fault detection in diesel engines air-path

Cette thèse a pour but l étude de la détection basée sur modèle de défauts pour lesmoteurs Diesel produits en grande série. La nécessité d une surveillance continue del état de santé des véhicules est maintenant renforcée par la législation Euro VI sur lesémissions polluantes, qui sera probablement rendue encore plus contraignante dans sesprochaines révisions. Dans ce contexte, le développement de stratégies robustes, faciles àcalibrer et valides pour des systèmes dispersés (car produits en grande série) procureraitun avantage considérable aux constructeurs automobile. L étude développée ici tentede répondre à ces besoins en proposant une méthodologie générique. On utilise desobservateurs adaptatifs locaux pour des systèmes scalaires non linéaires et affines parrapport à l état, pour résoudre les problèmes de la détection de défauts, de son isolationet de son estimation d une façon compacte. De plus, les incertitudes liées aux biais demesure et de modèle et aux dérives temporelles nécessitent d améliorer les méthodes dedétection par l utilisation de seuils robustes pour éviter les fausses détections. Dans cettethèse, on propose un seuil variable basé sur la condition d observabilité du paramètreimpacté par le défaut et sur une étude de sensibilité par rapport aux incertitudes surles entrées ou sur le modèle. Cette méthode permet, entre autres, de fournir un outild analyse pour la sélection des conditions de fonctionnement du système pour lesquelsle diagnostic est plus fiable et plus robuste par rapport aux incertitudes sur les entrées.L approche présentée a été appliquée avec succès et validée de façon expérimentale surun moteur Diesel pour le problème de détection de fuite dans le système d admissiond air, puis dans un environnement de simulation pour le problème de détection dedérive d efficacité turbine. On montre ainsi ses avantages en termes de fiabilité dedétection, d effort de calibration, et pour l analyse des conditions de fonctionnementmoteur adaptées au diagnostic.The study of model-based fault detection for mass production Diesel engines isthe aim of this thesis. The necessity of continuous vehicles health monitoring is nowenforced by the Euro VI pollutant legislation, which will probably be tightened in itsfuture revisions. In this context developing a robust strategy that could be easilycalibrated and work with different systems (due to production variability) would bea tremendous advantage for car manufacturers. The study developed here tries toanswer to those necessities by proposing a generic methodology based on local adaptiveobservers for scalar nonlinear state-affine systems. The fault detection, isolation andestimation problems are thus solved in a compact way. Moreover, the uncertaintiesdue to measurement or model biases and time drifts lead to the necessity of improvingthe detection methodology by the use of robust thresholds that could avoid undesiredfalse alarms. In this thesis a variable threshold is proposed based on the observabilitycondition and the sensitivity analysis of the parameter impacted by the fault withrespect to input or model uncertainties. This approach allows, among other things, tobe used as an analysis tool for the individuation of the system operating points for whichthe diagnosis is more reliable and more robust to inputs uncertainties. The discussedapproach has been successfully implemented and experimentally tested on a real Dieselengine for the intake leak detection and for the turbine efficiency loss drift detectionin a co-simulation environment showing its advantages in term of detection reliability,calibration effort and engines diagnosis operating condition analysis.SAVOIE-SCD - Bib.électronique (730659901) / SudocGRENOBLE1/INP-Bib.électronique (384210012) / SudocGRENOBLE2/3-Bib.électronique (384219901) / SudocSudocFranceF