445 research outputs found
CMD: A Multi-Channel Coordination Scheme for Emergency Message Dissemination in IEEE 1609.4
In the IEEE 1609.4 legacy standard for multi-channel communications in
vehicular ad hoc networks(VANETs), the control channel (CCH) is dedicated to
broadcast safety messages while the service channels (SCH's) are dedicated to
transmit infotainment service content. However, the SCH can be used as an
alternative to transmit high priority safety messages in the event that they
are invoked during the service channel interval (SCHI). This implies that there
is a need to transmit safety messages across multiple available utilized
channels to ensure that all vehicles receive the safety message. Transmission
across multiple SCH's using the legacy IEEE 1609.4 requires multiple channel
switching and therefore introduces further end-to-end delays. Given that safety
messaging is a life critical application, it is important that optimal
end-to-end delay performance is derived in multi-channel VANET scenarios to
ensure reliable safety message dissemination. To tackle this challenge, three
primary contributions are in this article: first, a channel coordinator
selection approach based on the least average separation distance (LAD) to the
vehicles that expect to tune to other SCH's and operates during the control
channel interval (CCHI) is proposed. Second, a model to determine the optimal
time intervals in which CMD operates during the CCHI is proposed. Third, a
contention back-off mechanism for safety message transmission during the SCHI
is proposed. Computer simulations and mathematical analysis show that CMD
performs better than the legacy IEEE 1609.4 and a selected state-of-the-art
multi-channel message dissemination schemes in terms of end-to-end delay and
packet reception ratio.Comment: 15 pages, 10 figures, 7 table
Road-based routing in vehicular ad hoc networks
Vehicular ad hoc networks (VANETs) can provide scalable and cost-effective solutions for applications such as traffic safety, dynamic route planning, and context-aware advertisement using short-range wireless communication. To function properly, these applications require efficient routing protocols. However, existing mobile ad hoc network routing and forwarding approaches have limited performance in VANETs. This dissertation shows that routing protocols which account for VANET-specific characteristics in their designs, such as high density and constrained mobility, can provide good performance for a large spectrum of applications.
This work proposes a novel class of routing protocols as well as three forwarding optimizations for VANETs. The Road-Based using Vehicular Traffic (RBVT) routing is a novel class of routing protocols for VANETs. RBVT protocols leverage real-time vehicular traffic information to create stable road-based paths consisting of successions of road intersections that have, with high probability, network connectivity among them. Evaluations of RBVT protocols working in conjunction with geographical forwarding show delivery rate increases as much as 40% and delay decreases as much as 85% when compared with existing protocols.
Three optimizations are proposed to increase forwarding performance. First, one- hop geographical forwarding is improved using a distributed receiver-based election of next hops, which leads to as much as 3 times higher delivery rates in highly congested networks. Second, theoretical analysis and simulation results demonstrate that the delay in highly congested networks can be reduced by half by switching from traditional FIFO with Taildrop queuing to LIFO with Frontdrop queuing. Third, nodes can determine suitable times to transmit data across RBVT paths or proactively replace routes before they break using analytical models that accurately predict the expected road-based path durations in VANETs
Increasing throughput in IEEE 802.11 by optimal selection of backoff parameters
Engineering and Physical Sciences Research Council. Grant Number: EP/G012628/
Reduced Fuel Emissions through Connected Vehicles and Truck Platooning
Vehicle-to-infrastructure (V2I) and vehicle-to-vehicle (V2V) communication enable the sharing, in real time, of vehicular locations and speeds with other vehicles, traffic signals, and traffic control centers. This shared information can help traffic to better traverse intersections, road segments, and congested neighborhoods, thereby reducing travel times, increasing driver safety, generating data for traffic planning, and reducing vehicular pollution. This study, which focuses on vehicular pollution, used an analysis of data from NREL, BTS, and the EPA to determine that the widespread use of V2V-based truck platooning—the convoying of trucks in close proximity to one another so as to reduce air drag across the convoy—could eliminate 37.9 million metric tons of CO2 emissions between 2022 and 2026
- …