Visible Light Communications towards 5G

5G networks have to offer extremely high capacity for novel streaming applications. One of the most promising approaches is to embed large numbers of co-operating small cells into the macro-cell coverage area. Alternatively, optical wireless based technologies can be adopted as an alternative physical layer offering higher data rates. Visible light communications (VLC) is an emerging technology for future high capacity communication links (it has been accepted to 5GPP) in the visible range of the electromagnetic spectrum (~370–780 nm) utilizing light-emitting diodes (LEDs) simultaneously provide data transmission and room illumination. A major challenge in VLC is the LED modulation bandwidths, which are limited to a few MHz. However, myriad gigabit speed transmission links have already been demonstrated. Non line-of-sight (NLOS) optical wireless is resistant to blocking by people and obstacles and is capable of adapting its’ throughput according to the current channel state information. Concurrently, organic polymer LEDs (PLEDs) have become the focus of enormous attention for solid-state lighting applications due to their advantages over conventional white LEDs such as ultra-low costs, low heating temperature, mechanical flexibility and large photoactive areas when produced with wet processing methods. This paper discusses development of such VLC links with a view to implementing ubiquitous broadcasting networks featuring advanced modulation formats such as orthogonal frequency division multiplexing (OFDM) or carrier-less amplitude and phase modulation (CAP) in conjunction with equalization techniques. Finally, this paper will also summarize the results of the European project ICT COST IC1101 OPTICWISE (Optical Wireless Communications - An Emerging Technology) dealing VLC and OLEDs towards 5G networks

Experimental demonstration of RGB LED-based optical camera communications

Red, green, and blue (RGB) light-emitting diodes (LEDs) are widely used in everyday illumination, particularly where color-changing lighting is required. On the other hand, digital cameras with color filter arrays over image sensors have been also extensively integrated in smart devices. Therefore, optical camera communications (OCC) using RGB LEDs and color cameras is a promising candidate for cost-effective parallel visible light communications (VLC). In this paper, a single RGB LED-based OCC system utilizing a combination of undersampled phase-shift on off keying (UPSOOK), wavelength-division multiplexing (WDM), and multiple-input multiple-output (MIMO) techniques is designed, which offers higher space efficiency (3 bits/Hz/LED), long-distance, and nonflickering VLC data transmission. A proof-of-concept test bed is developed to assess the bit-error-rate performance of the proposed OCC system. The experimental results show that the proposed system using a single commercially available RGB LED and a standard 50-frame/s camera is able to achieve a data rate of 150 bits/s over a range of up to 60 m

A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications

The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost plastic optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb/s are also outlined

Spatial and wavelength division multiplexing for high-speed VLC systems: An overview

White light emitting diodes (LEDs) are becoming the primary source of illumination for the home and office environment. These LEDs can be intensity modulated to transmit high-speed data via an optical carrier. As a result, there is a paradigm shift in indoor wireless communication as the illumination infrastructure can be reused for data communications. It is widely expected that visible light communication (VLC) system will play a significant role in realizing the high-speed data communication envisaged for 5G connectivity. The goal of VLC systems is to provide a reliable and ubiquitous communication link that is an order of magnitude faster than current radio frequency (RF) links. In order to support the high data rates required for the current and future generations of communication systems, a number of techniques were explored for VLC by a number of research groups worldwide. This paper provides an overview of spatial and wavelength division multiplexing that has enabled multi-Gb/s transmission speeds in VLC using low bandwidth LEDs

Neural Network-Based Joint Spatial and Temporal Equalization for MIMO-VLC System

The limited bandwidth of white light-emitting diode (LED) limits the achievable data rate in a visible light communication (VLC) system. A number of techniques, including multiple-input-multiple-output (MIMO) system, are investigated to increase the data rate. The high-speed optical MIMO system suffers from both spatial and temporal cross talks. The spatial cross-talk is often compensated by the MIMO decoding algorithm, while the temporal cross talk is mitigated using an equalizer. However, the LEDs have a non-linear transfer function and the performance of linear equalizers are limited. In this letter, we propose a joint spatial and temporal equalization using an artificial neural network (ANN) for an MIMO-VLC system. We demonstrate using a practical imaging/non-imaging optical MIMO link that the ANN-based joint equalization outperforms the joint equalization using a traditional decision feedback as ANN is able to compensate the non-linear transfer function as well as cross talk

Visible Light Communications: Simplified Co-Equalisation of Fast OFDM in a Multiple-Input Multiple-Output Configuration

In this paper we experimentally demonstrate, for the first time, a simplified co-equalisation for imaging multiple-input multiple-output based visible light communication systems. We show that in such systems, where all channels have similar magnitude responses, an equaliser trained on a single channel produces coefficients that may be used in the form of a look-up table to equalise the remaining channels without the need for explicit or bespoke training. The system demonstrated is based on the fast-orthogonal frequency division multiplexing based on pulse amplitude modulation scheme to improve the spectral efficiency, where a data rate of 80 Mb/s is achieved using four light-emitting diodes, each of a 4 MHz raw bandwidth. We show that the reported system performance closely matches that of the traditional and more computationally complex system in terms of bit-error rate

Data rate enhancement in optical camera communications using an artificial neural network equaliser

In optical camera communication (OCC) systems leverage on the use of commercial off-the-shelf image sensors to perceive the spatial and temporal variation of light intensity to enable data transmission. However, the transmission data rate is mainly limited by the exposure time and the frame rate of the camera. In addition, the camera’s sampling will introduce intersymbol interference (ISI), which will degrade the system performance. In this paper, an artificial neural network (ANN)-based equaliser with the adaptive algorithm is employed for the first time in the field of OCC to mitigate ISI and therefore increase the data rate. Unlike other communication systems, training of the ANN network in OCC is done only once in a lifetime for a range of different exposure time and the network can be stored with a look-up table. The proposed system is theoretically investigated and experimentally evaluated. The results record the highest bit rate for OCC using a single LED source and the Manchester line code (MLC) non-return to zero (NRZ) encoded signal. It also demonstrates 2 to 9 times improved bandwidth depending on the exposure times where the system’s bit error rate is below the forward error correction limit.publishe

Trace-Orthogonal PPM-Space Time Block Coding Under Rate Constraints for Visible Light Communication

Visible light communications (VLC) represents a new frontier of communications allowing high data-rate Internet access, specially in indoor environments, where the use of light emitting diodes (LEDs) is growing as a viable alternative to traditional illumination. As a result, LED output intensity can be varied faster than human eye can perceive, thus guaranteeing simultaneous wireless communications and illumination. One of the key challenges is the limited modulation bandwidth of sources that is typically around several MHz. The use of multiple input and multiple output (MIMO) techniques in optical wireless system helps to increase the capacity of the system and thus improve the system performance. In this paper, we investigate the use of an optical MIMO technique jointly with pulse position modulation (PPM) in order to improve the data rates without reducing the reliability of the link. PPM is known to be signal-to-noise ratio efficient modulation format, while it is bandwidth inefficient so the use of MIMO can compensate that drawback with reasonable complexity. Furthermore, an offline tool for VLC system planning, including error probability and transmission rate, has been proposed in order to solve the tradeoff between transmission rate and error rate. Finally, several numerical results and performance comparisons are reported