Shortest Paths and Steiner Trees in VLSI Routing

Routing is one of the major steps in very-large-scale integration (VLSI) design. Its task is to find disjoint wire connections between sets of points on a chip, subject to numerous constraints. This problem is solved in a two-stage approach, which consists of so-called global and detailed routing steps. For each set of metal components to be connected, global routing reduces the search space by computing corridors in which detailed routing sequentially determines the desired connections as shortest paths. In this thesis, we present new theoretical results on Steiner trees and shortest paths, the two main mathematical concepts in routing. In the practical part, we give computational results of BonnRoute, a VLSI routing tool developed at the Research Institute for Discrete Mathematics at the University of Bonn. Interconnect signal delays are becoming increasingly important in modern chip designs. Therefore, the length of paths or direct delay measures should be taken into account when constructing rectilinear Steiner trees. We consider the problem of finding a rectilinear Steiner minimum tree (RSMT) that --- as a secondary objective --- minimizes a signal delay related objective. Given a source we derive some structural properties of RSMTs for which the weighted sum of path lengths from the source to the other terminals is minimized. Also, we present an exact algorithm for constructing RSMTs with weighted sum of path lengths as secondary objective, and a heuristic for various secondary objectives. Computational results for industrial designs are presented. We further consider the problem of finding a shortest rectilinear Steiner tree in the plane in the presence of rectilinear obstacles. The Steiner tree is allowed to run over obstacles; however, if it intersects an obstacle, then no connected component of the induced subtree must be longer than a given fixed length. This kind of length restriction is motivated by its application in VLSI routing where a large Steiner tree requires the insertion of repeaters which must not be placed on top of obstacles. We show that there are optimal length-restricted Steiner trees with a special structure. In particular, we prove that a certain graph (called augmented Hanan grid) always contains an optimal solution. Based on this structural result, we give an approximation scheme for the special case that all obstacles are of rectangular shape or are represented by at most a constant number of edges. Turning to the shortest paths problem, we present a new generic framework for Dijkstra's algorithm for finding shortest paths in digraphs with non-negative integral edge lengths. Instead of labeling individual vertices, we label subgraphs which partition the given graph. Much better running times can be achieved if the number of involved subgraphs is small compared to the order of the original graph and the shortest path problems restricted to these subgraphs is computationally easy. As an application we consider the VLSI routing problem, where we need to find millions of shortest paths in partial grid graphs with billions of vertices. Here, the algorithm can be applied twice, once in a coarse abstraction (where the labeled subgraphs are rectangles), and once in a detailed model (where the labeled subgraphs are intervals). Using the result of the first algorithm to speed up the second one via goal-oriented techniques leads to considerably reduced running time. We illustrate this with the routing program BonnRoute on leading-edge industrial chips. Finally, we present computational results of BonnRoute obtained on real-world VLSI chips. BonnRoute fulfills all requirements of modern VLSI routing and has been used by IBM and its customers over many years to produce more than one thousand different chips. To demonstrate the strength of BonnRoute as a state-of-the-art industrial routing tool, we show that it performs excellently on all traditional quality measures such as wire length and number of vias, but also on further criteria of equal importance in the every-day work of the designer

A Specific Network Link and Path Likelihood Prediction Tool

Communications have always been a crucial part of any military operation. As the pace of warfare and the technological complexity of weaponry have increased, so has the need for rapid information to assess battlefield conditions. Message passing across a network of communication nodes allowed commanders to communicate with their forces. It is clear that an accurate prediction of communication usage through a network will provide commanders with useful intelligence of friendly and unfriendly activities. Providing a specific network link and path likelihood prediction tool gives strategic military commanders additional intelligence information and enables them to manage their limited resources more efficiently. In this study, Dijkstra\u27s algorithm has been modified to allow the Queueing Network Analyzer\u27s (QNA) analysis output to act as a node\u27s goodness metric. QNA\u27s calculation of the expected Total Sojourn Time for the completion of queueing and service in a node provides accurate measurement of expected congestion. The modified Dijkstra\u27s algorithm in the Generalized Network Analyzer (GNA) is verified and empirically validated to properly deliver traffic. It appropriately generates the fastest traffic path from a start node to a destination node. This implementation includes notification if input parameters exceed the network\u27s processing capability. GNA\u27s Congestion Control displays notification and informs the user certain network input parameters must be lowered (PTR or BSTR) or where certain nodes must be improved to maintain node stability. With this unstable node identification, users can determine which node needs attention and improvements. Once this instability is removed, a good QoS is achieved and analysis proceeds

An integrated placement and routing approach

As the feature size continues scaling down, interconnects become the major contributor of signal delay. Since interconnects are mainly determined by placement and routing, these two stages play key roles to achieve high performance. Historically, they are divided into two separate stages to make the problem tractable. Therefore, the routing information is not available during the placement process. Net models such as HPWL, are employed to approximate the routing to simplify the placement problem. However, the good placement in terms of these objectives may not be routable at all in the routing stage because different objectives are optimized in placement and routing stages. This inconsistancy makes the results obtained by the two-step optimization method far from optimal;In order to achieve high-quality placement solution and ensure the following routing, we propose an integrated placement and routing approach. In this approach, we integrate placement and routing into the same framework so that the objective optimized in placement is the same as that in routing. Since both placement and routing are very hard problems (NP-hard), we need to have very efficient algorithms so that integrating them together will not lead to intractable complexity;In this dissertation, we first develop a highly efficient placer - FastPlace 3.0 for large-scale mixed-size placement problem. Then, an efficient and effective detailed placer - FastDP is proposed to improve global placement by moving standard cells in designs. For high-degree nets in designs, we propose a novel performance-driven topology design algorithm to generate good topologies to achieve very strict timing requirement. In the routing phase, we develop two global routers, FastRoute and FastRoute 2.0. Compared to traditional global routers, they can generate better solutions and are two orders of magnitude faster. Finally, based on these efficient and high-quality placement and routing algorithms, we propose a new flow which integrates placement and routing together closely. In this flow, global routing is extensively applied to obtain the interconnect information and direct the placement process. In this way, we can get very good placement solutions with guaranteed routability

Design of Heuristic Algorithms for Hard Optimization

This open access book demonstrates all the steps required to design heuristic algorithms for difficult optimization. The classic problem of the travelling salesman is used as a common thread to illustrate all the techniques discussed. This problem is ideal for introducing readers to the subject because it is very intuitive and its solutions can be graphically represented. The book features a wealth of illustrations that allow the concepts to be understood at a glance. The book approaches the main metaheuristics from a new angle, deconstructing them into a few key concepts presented in separate chapters: construction, improvement, decomposition, randomization and learning methods. Each metaheuristic can then be presented in simplified form as a combination of these concepts. This approach avoids giving the impression that metaheuristics is a non-formal discipline, a kind of cloud sculpture. Moreover, it provides concrete applications of the travelling salesman problem, which illustrate in just a few lines of code how to design a new heuristic and remove all ambiguities left by a general framework. Two chapters reviewing the basics of combinatorial optimization and complexity theory make the book self-contained. As such, even readers with a very limited background in the field will be able to follow all the content

Smart Energy Management for Smart Grids

This book is a contribution from the authors, to share solutions for a better and sustainable power grid. Renewable energy, smart grid security and smart energy management are the main topics discussed in this book

Case Studies on Clock Gating and Local Routign for VLSI Clock Mesh

The clock is the important synchronizing element in all synchronous digital systems. The difference in the clock arrival time between sink points is called the clock skew. This uncertainty in arrival times will limit operating frequency and might cause functional errors. Various clock routing techniques can be broadly categorized into 'balanced tree' and 'fixed mesh' methods. The skew and delay using the balanced tree method is higher compared to the fixed mesh method. Although fixed mesh inherently uses more wire length, the redundancy created by loops in a mesh structure reduces undesired delay variations. The fixed mesh method uses a single mesh over the entire chip but it is hard to introduce clock gating in a single clock mesh. This thesis deals with the introduction of 'reconfigurability' by using control structures like transmission gates between sub-clock meshes, thus enabling clock gating in clock mesh. By using the optimum value of size for PMOS and NMOS of transmission gate (SZF) and optimum number of transmission gates between sub-clock meshes (NTG) for 4x4 reconfigurable mesh, the average of the maximum skew for all benchmarks is reduced by 18.12 percent compared to clock mesh structure when no transmission gates are used between the sub-clock meshes (reconfigurable mesh with NTG =0). Further, the research deals with a ‘modified zero skew method' to connect synchronous flip-flops or sink points in the circuit to the clock grids of clock mesh. The wire length reduction algorithms can be applied to reduce the wire length used for a local clock distribution network. The modified version of ‘zero skew method’ of local clock routing which is based on Elmore delay balancing aims at minimizing wire length for the given bounded skew of CDN using clock mesh and H-tree. The results of ‘modified zero skew method' (HC_MZSK) show average local wire length reduction of 17.75 percent for all ISPD benchmarks compared to direct connection method. The maximum skew is small for HC_MZSK in most of the test cases compared to other methods of connections like direct connections and modified AHHK. Thus, HC_MZSK for local routing reduces the wire length and maximum skew