Crypto Embedded System for Electronic Document

In this paper, a development of low-cost RSA-based Crypto Embedded System targeted for electronic document security is presented. The RSA algorithm is implemented in a re-configurable hardware, in this case Field Programmable Gate Array (FPGA). The 32-bit soft cores of AlteraÂ’s Nios RISC processor is used as the basic building blocks of the proposed complete embedded solutions. AlteraÂ’s SOPC Builder is used to facilitate the development of crypto embedded system, particularly in hardware/software integration stage. The use of Cryptographic Application Programming Interface (CAPI) to bridge the application and the hardware, and the associated communication layer in the embedded system is also discussed. The result obtained shows that the crypto embedded system provides a suitable compromise between the constraints of speed, space and required security level based on the specific demands of targeted applications

Enhancing an Embedded Processor Core with a Cryptographic Unit for Performance and Security

We present a set of low-cost architectural enhancements to accelerate the execution of certain arithmetic operations common in cryptographic applications on an extensible embedded processor core. The proposed enhancements are generic in the sense that they can be beneficially applied in almost any RISC processor. We implemented the enhancements in form of a cryptographic unit (CU) that offers the programmer an extended instruction set. The CU features a 128-bit wide register file and datapath, which enables it to process 128-bit words and perform 128-bit loads/stores. We analyze the speed-up factors for some arithmetic operations and public-key cryptographic algorithms obtained through these enhancements. In addition, we evaluate the hardware overhead (i.e. silicon area) of integrating the CU into an embedded RISC processor. Our experimental results show that the proposed architectural enhancements allow for a significant performance gain for both RSA and ECC at the expense of an acceptable increase in silicon area. We also demonstrate that the proposed enhancements facilitate the protection of cryptographic algorithms against certain types of side-channel attacks and present an AES implementation hardened against cache-based attacks as a case study

Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

CIDPro: Custom Instructions for Dynamic Program Diversification

Timing side-channel attacks pose a major threat to embedded systems due to their ease of accessibility. We propose CIDPro, a framework that relies on dynamic program diversification to mitigate timing side-channel leakage. The proposed framework integrates the widely used LLVM compiler infrastructure and the increasingly popular RISC-V FPGA soft-processor. The compiler automatically generates custom instructions in the security critical segments of the program, and the instructions execute on the RISC-V custom co-processor to produce diversified timing characteristics on each execution instance. CIDPro has been implemented on the Zynq7000 XC7Z020 FPGA device to study the performance overhead and security tradeoffs. Experimental results show that our solution can achieve 80% and 86% timing side-channel capacity reduction for two benchmarks with an acceptable performance overhead compared to existing solutions. In addition, the proposed method incurs only a negligible hardware area overhead of 1% slices of the entire RISC-V system

Implementing a protected zone in a reconfigurable processor for isolated execution of cryptographic algorithms

We design and realize a protected zone inside a reconfigurable and extensible embedded RISC processor for isolated execution of cryptographic algorithms. The protected zone is a collection of processor subsystems such as functional units optimized for high-speed execution of integer operations, a small amount of local memory, and general and special-purpose registers. We outline the principles for secure software implementation of cryptographic algorithms in a processor equipped with the protected zone. We also demonstrate the efficiency and effectiveness of the protected zone by implementing major cryptographic algorithms, namely RSA, elliptic curve cryptography, and AES in the protected zone. In terms of time efficiency, software implementations of these three cryptographic algorithms outperform equivalent software implementations on similar processors reported in the literature. The protected zone is designed in such a modular fashion that it can easily be integrated into any RISC processor; its area overhead is considerably moderate in the sense that it can be used in vast majority of embedded processors. The protected zone can also provide the necessary support to implement TPM functionality within the boundary of a processor

Constructing cluster of simple FPGA boards for cryptologic computations

In this paper, we propose an FPGA cluster infrastructure, which can be utilized in implementing cryptanalytic attacks and accelerating cryptographic operations. The cluster can be formed using simple and inexpensive, off-the-shelf FPGA boards featuring an FPGA device, local storage, CPLD, and network connection. Forming the cluster is simple and no effort for the hardware development is needed except for the hardware design for the actual computation. Using a softcore processor on FPGA, we are able to configure FPGA devices dynamically and change their configuration on the fly from a remote computer. The softcore on FPGA can execute relatively complicated programs for mundane tasks unworthy of FPGA resources. Finally, we propose and implement a fast and efficient dynamic configuration switch technique that is shown to be useful especially in cryptanalytic applications. Our infrastructure provides a cost-effective alternative for formerly proposed cryptanalytic engines based on FPGA devices