Hybrid Free-Space Optical and Visible Light Communication Link

V součastnosti bezdrátové optické komunikace (optical wireless communication, OWC) získávají širokou pozornost jako vhodný doplněk ke komunikačním přenosům v rádiovém pásmu. OWC nabízejí několik výhod včetně větší šířky přenosového pásma, neregulovaného frekvenčního pásma či odolnosti vůči elektromagnetickému rušení. Tato práce se zabývá návrhem OWC systémů pro připojení koncových uživatelů. Samotná realizace spojení může být provedena za pomoci různých variant bezdrátových technologií, například pomocí OWC, kombinací různých OWC technologií nebo hybridním rádio-optickým spojem. Za účelem propojení tzv. poslední míle je analyzován optický bezvláknový spoj (free space optics, FSO). Tato práce se dále zabývá analýzou přenosových vlastností celo-optického více skokového spoje s důrazem na vliv atmosférických podmínek. V dnešní době mnoho uživatelů tráví čas ve vnitřních prostorech kanceláří či doma, kde komunikace ve viditelném spektru (visible light communication, VLC) poskytuje lepší přenosové parametry pokrytí než úzce směrové FSO. V rámci této práce byla odvozena a experimentálně ověřena závislost pro bitovou chybovost přesměrovaného (relaying) spoje ve VLC. Pro propojení poskytovatele datavých služeb s koncovým uživatelem může být výhodné zkombinovat více přenosových technologií. Proto je navržen a analyzovám systém pro překonání tzv. problému poslední míle a posledního metru kombinující hybridní FSO a VLC technologie.The field of optical wireless communications (OWC) has recently attracted significant attention as a complementary technology to radio frequency (RF). OWC systems offer several advantages including higher bandwidth, an unregulated spectrum, resistance to electromagnetic interference and a high order of reusability. The thesis focuses on the deployment and analyses of end-user interconnections using the OWC systems. Interconnection can be established by many wireless technologies, for instance, by a single OWC technology, a combination of OWC technologies, or by hybrid OWC/RF links. In order to establish last mile outdoor interconnection, a free-space optical (FSO) has to be investigated. In this thesis, the performance of all-optical multi-hop scenarios is analyzed under atmospheric conditions. However, nowadays, many end users spend much time in indoor environments where visible light communication (VLC) technology can provide better transmission parameters and, significantly, better coverage. An analytical description of bit error rate for relaying VLC schemes is derived and experimentally verified. Nonetheless, for the last mile, interconnection of a provider and end users (joint outdoor and indoor connection) can be advantageous when combining multiple technologies. Therefore, a hybrid FSO/VLC system is proposed and analyzed for the interconnection of the last mile and last meter bottleneck

Performance Analysis of Project-and-Forward Relaying in Mixed MIMO-Pinhole and Rayleigh Dual-Hop Channel

In this letter, we present an end-to-end performance analysis of dual-hop project-and-forward relaying in a realistic scenario, where the source-relay and the relay-destination links are experiencing MIMO-pinhole and Rayleigh channel conditions, respectively. We derive the probability density function of both the relay post-processing and the end-to-end signal-to-noise ratios, and the obtained expressions are used to derive the outage probability of the analyzed system as well as its end-to-end ergodic capacity in terms of generalized functions. Applying then the residue theory to Mellin-Barnes integrals, we infer the system asymptotic behavior for different channel parameters. As the bivariate Meijer-G function is involved in the analysis, we propose a new and fast MATLAB implementation enabling an automated definition of the complex integration contour. Extensive Monte-Carlo simulations are invoked to corroborate the analytical results.Comment: 4 pages, IEEE Communications Letters, 201

Green Cellular Networks: A Survey, Some Research Issues and Challenges

Energy efficiency in cellular networks is a growing concern for cellular operators to not only maintain profitability, but also to reduce the overall environment effects. This emerging trend of achieving energy efficiency in cellular networks is motivating the standardization authorities and network operators to continuously explore future technologies in order to bring improvements in the entire network infrastructure. In this article, we present a brief survey of methods to improve the power efficiency of cellular networks, explore some research issues and challenges and suggest some techniques to enable an energy efficient or "green" cellular network. Since base stations consume a maximum portion of the total energy used in a cellular system, we will first provide a comprehensive survey on techniques to obtain energy savings in base stations. Next, we discuss how heterogeneous network deployment based on micro, pico and femto-cells can be used to achieve this goal. Since cognitive radio and cooperative relaying are undisputed future technologies in this regard, we propose a research vision to make these technologies more energy efficient. Lastly, we explore some broader perspectives in realizing a "green" cellular network technologyComment: 16 pages, 5 figures, 2 table

Spectral-energy efficiency trade-off of relay-aided cellular networks

Wireless communication networks are traditionally designed to operate at high spectral e ciency with less emphasis on power consumption as it is assumed that endless power supply is available through the power grid where the cells are connected to. As new generations of mobile networks exhibit decreasing gains in spectral e ciency, the mobile industry is forced to consider energy reform policies in order to sustain the economic growth of itself and other industries relying on it. Consequently, the energy e ciency of conventional direct transmission cellular networks is being examined while alternative green network architectures are also explored. The relay-aided cellular network is being considered as one of the potential network architecture for energy e cient transmission. However, relaying transmission incurs multiplexing loss due to its multi-hop protocol. This, in turn, reduces network spectral e ciency. Furthermore, interference is also expected to increase with the deployment of Relay Stations (RSs) in the network. This thesis examines the power consumption of the conventional direct transmission cellular network and contributes to the development of the relay-aided cellular network. Firstly, the power consumption of the direct transmission cellular network is investigated. While most work considered transmitter side strategies, the impact of the receiver on the Base Station (BS) total power consumption is investigated here. Both the zero-forcing and minimum mean square error weight optimisation approaches are considered for both the conventional linear and successive interference cancellation receivers. The power consumption model which includes both the radio frequency transmit power and circuit power is described. The in uence of the receiver interference cancellation techniques, the number of transceiver antennas, circuit power consumption and inter-cell interference on the BS total power consumption is investigated. Secondly, the spectral-energy e ciency trade-o in the relay-aided cellular network is investigated. The signal forwarding and interference forwarding relaying paradigms are considered with the direct transmission cellular network taken as the baseline. This investigation serves to understand the dynamics in the performance trade-o . To select a suitable balance point in the trade-o , the economic e ciency metric is proposed whereby the spectral-energy e ciency pair which maximises the economic pro tability is found. Thus, the economic e ciency metric can be utilised as an alternative means to optimise the relay-aided cellular network while taking into account the inherent spectral-energy e ciency trade-o . Finally, the method of mitigating interference in the relay-aided cellular network is demonstrated by means of the proposed relay cooperation scheme. In the proposed scheme, both joint RS decoding and independent RS decoding approaches are considered during the broadcast phase while joint relay transmission is employed in the relay phase. Two user selection schemes requiring global Channel State Information (CSI) are considered. The partial semi-orthogonal user selection method with reduced CSI requirement is then proposed. As the cooperative cost limits the practicality of cooperative schemes, the cost incurred at the cooperative links between the RSs is investigated for varying degrees of RS cooperation. The performance of the relay cooperation scheme with di erent relay frequency reuse patterns is considered as well. In a nutshell, the research presented in this thesis reveals the impact of the receiver on the BS total power consumption in direct transmission cellular networks. The relayaided cellular network is then presented as an alternative architecture for energy e cient transmission. The economic e ciency metric is proposed to maximise the economic pro tability of the relay network while taking into account the existing spectral-energy e ciency trade-o . To mitigate the interference from the RSs, the relay cooperation scheme for advanced relay-aided cellular networks is proposed

Propagation measurement based study on relay networks

Von der nächsten Generation von Mobilfunksystemen erwartet man eine umfassende Versorgung mit breitbandigen Multimediadiensten. Um die dafür erforderliche flächendeckende Versorgung mit hohen Datenraten zu gewährleisten, können Relay-Netzwerke einen wesentlichen Beitrag liefern. Hierbei werden Netzwerkstationen mit Relay-Funktionalität in zellulare Netzwerke integriert. Diese Dissertation befasst sich mit der Untersuchung Relay-basierter Netzwerke unter Verwendung von Ausbreitungsmessungen. Die Arbeit deckt Fragen zur Kanalmodellierung, Systemevaluierung bis hin zur Systemverifikation ab. - Zunächst wird ein auf Funkkanalmessungen beruhendes experimentelles Kanalmodell für Relay-Netzwerke vorgestellt. Im Weiteren werden technische Verfahren für Mehrfachzugriffs-Relay-Netzwerke MARN diskutiert. Die erreichbare Systemleistung wurde unter Verwendung von Rayleigh-Kanälen innerhalb einer Systemsimulation bestimmt und im Anschluss mit realen Kanälen, die sowohl direkt aus Funkkanalmessungen als auch indirekt aus dem bereits erwähnten Kanalmodell abgeleitet wurden, verifiziert. Bisherige Arbeiten zur Modellierung breitbandiger Multiple-Input Multiple-Output (MIMO) Kanäle berücksichtigen nicht oder nur sehr stark vereinfacht die Langzeitkorrelationseigenschaften zwischen den Links und werden damit der vermaschten und räumlich weit verteilten Topologie von Relay-Netzwerken gerecht. In der vorliegenden Dissertation erfolgte daher eine experimentelle Untersuchung zu den Korrelationseigenschaften von Large-Scale-Parametern LSP, die unter Verwendung von Funkkanalmessdaten aus urbanen Umgebungen und aus Innenräumen abgeleitet wurden. Die Ergebnisse hierzu fanden Eingang in das vom WINNER-Projekt entwickelte Kanalmodell. Sie erlauben damit eine realistischere Simulation von Relay-unterstützten Netzen. Einen weiteren Schwerpunkt dieser Arbeit stellen technische Verfahren dar, die eine Erhöhung der Systemleistung in MARN mit unbekannter Interferenz UKIF versprechen. Im Einzelnen handelt es sich um die Mehrfachzugriffs-Kodierung MAC - die eine verbesserte Signaltrennung auf der Empfängerseite und eine Erhöhung des Datendurchsatzes erlaubt, den Entwurf eines Relay-Protokolls zur Erhöhung der Systemeffizienz, einen Minimum Mean Square Error (MMSE) Algorithmus zur Unterdrückung unbekannter Interferenzen bei Erhaltung der MAC-Signalstruktur mehrerer Mobilstationen MS, und ein fehlererkennungsbasiertes Signalauswahlverfahren zur Diversitätserhöhung. Die vorgenannten Verfahren werden in einer Systemsimulation zunächst mit Rayleigh-Kanälen evaluiert und demonstrieren die erzielbare theoretische Leistungssteigerung. Die Berücksichtigung realer Funkkanäle innerhalb der Systemsimulation zeigt allerdings, dass die theoretische Systemleistung so in der Realität nicht erreichbar ist. Die Ursache hierfür ist in den idealisierten Annahmen theoretischer Kanäle zu suchen. Für die Entwicklung künftiger Relay-Netzwerke bieten die in dieser Arbeit aufbereiteten Erkenntnisse hinsichtlich der Langzeitkorrelationseigenschaften zwischen den Links einen wertvollen Beitrag für die Abschätzung ihrer Systemleistung auf der Basis eines verbesserten Kanalmodells.Considering technological bases of next generation wireless systems, it is expected that systems can provide a variety of coverage requirements to support ubiquitous communications. To satisfy the requirements, an innovative idea, integrating network elements with a relaying capability into cellular networks, is one of the most promising solutions. The main topic of this dissertation is a propagation measurement based study on relay networks. The study includes three parts: channel modeling, performance evaluation, and verification. First of all, an empirical channel model for relay networks is proposed based on statistical analyses of measurement data. Then, advanced techniques for the throughput improvement and interference cancellation are proposed for Multiple Access Relay Networks (MARN) which are used as an example of relay networks. The performance of the considered MARN is evaluated for Rayleigh channels, and then verified for realistic channels, obtained from measurement data and from the experimental relay channel model as well. For relay channel modeling, the long-term correlation properties between links are of crucial importance due to the meshed-network topology. Although, there is a wide variety of research results for Multiple-Input Multiple-Output (MIMO) channel modeling available, the characterization of correlation properties has been significantly simplified or even completely ignored which motivates this research to be performed. In this dissertation, the experimental results of the correlation properties of Large Scale Parameters (LSP) are presented through the analysis on the real-field measurement data for both the urban and indoor scenarios. furthermore, the correlation properties have been fully introduced into the WINNER channel Model (WIM) for realistic relay channel simulations. As a further contribution of this dissertation, various advanced techniques are proposed for MARN in the presence of Unknown Interference (UKIF). Multiple Access Coding (MAC) is introduced as a multiple access technique. The use of MAC provides the signal separability at the receiver and improves throughput. Thereafter, high system resource efficiency can be achieved through relay protocol design. At the receiver, Minimum Mean Square Error (MMSE)-based spatial filtering is used to suppress UKIF while preserving multiple Mobile Station (MS)s’ MAC-encoded signal structure. Furthermore, an error detection aided signal selection technique is proposed for diversity increasing. The theoretical system performance with aforementioned techniques is simulated for Rayleigh channels. Thereafter, realistic channels are exploited for the performance verification. The gap between the theoretical performance and the realistic performance indicates that the assumptions made to the simplified Rayleigh-channels do not fully hold in reality. For the future relay system design, this work provides valuable information about the performance evaluation of relay networks in consideration of the correlation properties between links

A review of femtocell

The popularity of wireless networks has attracted the attention of researchers to improve the network system and this motivated the operators to find a new technology called femtocells with the aim of meeting the increased coverage and data demand in the indoor environment. The application of femtocells in both indoors and office environment has provided good quality service and high performance network gains. However, femtocells face challenges of interference management which deteriorate the capacity and quality of network. But to cope with these challenges, many researchers have come up with solutions to solve the problems, some of which include interference cancellation and interference avoidance

Experimental Investigation of All-Optical Relay-Assisted 10 Gb/s FSO Link Over the Atmospheric Turbulence Channel

This paper presents novel experimental results for a 10 Gb/s triple-hop relay-based all-optical free space optical (FSO) system by employing the amplify-and-forward relaying scheme. We provide a mathematical framework for the end-end signal-to-noise ratio (SNR) and the bit-error rate (BER) performance and confirm that the derived analytical results reasonably match experimental results especially at relatively high SNR. The evaluated BER performances under different atmospheric turbulence regimes (modeled by the Gamma-Gamma distribution) show that the considered relay-assisted FSO system offers a significant performance improvement for weak-to-strong turbulence regimes, even without knowledge of the channel state information. More precisely, at a target BER of 10-5, the proposed scheme offers ~5 and ~4 dB of SNR gains compared to the direct transmission for turbulence strengths Cn2 of 3.8 × 10-10 m-2/3 and 5.4 × 10-12 m-2/3, respectively