A survey of data recovery on flash memory

In recent years, flash memory has become more widely used due to its advantages, such as fast data access, low power consumption, and high mobility. However, flash memory also has drawbacks that need to be overcome, such as erase-before-write, and the limitations of block deletion. In order to address this issue, the FTL (Flash Translation Layer) has been proposed with useful functionalities like address mapping, garbage collection, and wear-leveling. During the process of using, the data may be lost on power failure in the storage systems. In some systems, the data is very important. Thus recovery of data in the event of the system crash or a sudden power outage is of prime importance. This problem has attracted attention from researchers and many studies have been done. In this paper, we investigate previous studies on data recovery for flash memory from FTL processing solutions to PLR (Power Loss Recovery) solutions that have been proposed by authors in the conference proceeding, patents, or professional journals. This will provide a discussion of the proposed solutions to the data recovery in flash memory as well as an overview

Dynamic Binary Translation for Embedded Systems with Scratchpad Memory

Embedded software development has recently changed with advances in computing. Rather than fully co-designing software and hardware to perform a relatively simple task, nowadays embedded and mobile devices are designed as a platform where multiple applications can be run, new applications can be added, and existing applications can be updated. In this scenario, traditional constraints in embedded systems design (i.e., performance, memory and energy consumption and real-time guarantees) are more difficult to address. New concerns (e.g., security) have become important and increase software complexity as well. In general-purpose systems, Dynamic Binary Translation (DBT) has been used to address these issues with services such as Just-In-Time (JIT) compilation, dynamic optimization, virtualization, power management and code security. In embedded systems, however, DBT is not usually employed due to performance, memory and power overhead. This dissertation presents StrataX, a low-overhead DBT framework for embedded systems. StrataX addresses the challenges faced by DBT in embedded systems using novel techniques. To reduce DBT overhead, StrataX loads code from NAND-Flash storage and translates it into a Scratchpad Memory (SPM), a software-managed on-chip SRAM with limited capacity. SPM has similar access latency as a hardware cache, but consumes less power and chip area. StrataX manages SPM as a software instruction cache, and employs victim compression and pinning to reduce retranslation cost and capture frequently executed code in the SPM. To prevent performance loss due to excessive code expansion, StrataX minimizes the amount of code inserted by DBT to maintain control of program execution. When a hardware instruction cache is available, StrataX dynamically partitions translated code among the SPM and main memory. With these techniques, StrataX has low performance overhead relative to native execution for MiBench programs. Further, it simplifies embedded software and hardware design by operating transparently to applications without any special hardware support. StrataX achieves sufficiently low overhead to make it feasible to use DBT in embedded systems to address important design goals and requirements

HMC-Based Accelerator Design For Compressed Deep Neural Networks

Deep Neural Networks (DNNs) offer remarkable performance of classifications and regressions in many high dimensional problems and have been widely utilized in real-word cognitive applications. In DNN applications, high computational cost of DNNs greatly hinder their deployment in resource-constrained applications, real-time systems and edge computing platforms. Moreover, energy consumption and performance cost of moving data between memory hierarchy and computational units are higher than that of the computation itself. To overcome the memory bottleneck, data locality and temporal data reuse are improved in accelerator design. In an attempt to further improve data locality, memory manufacturers have invented 3D-stacked memory where multiple layers of memory arrays are stacked on top of each other. Inherited from the concept of Process-In-Memory (PIM), some 3D-stacked memory architectures also include a logic layer that can integrate general-purpose computational logic directly within main memory to take advantages of high internal bandwidth during computation. In this dissertation, we are going to investigate hardware/software co-design for neural network accelerator. Specifically, we introduce a two-phase filter pruning framework for model compression and an accelerator tailored for efficient DNN execution on HMC, which can dynamically offload the primitives and functions to PIM logic layer through a latency-aware scheduling controller. In our compression framework, we formulate filter pruning process as an optimization problem and propose a filter selection criterion measured by conditional entropy. The key idea of our proposed approach is to establish a quantitative connection between filters and model accuracy. We define the connection as conditional entropy over filters in a convolutional layer, i.e., distribution of entropy conditioned on network loss. Based on the definition, different pruning efficiencies of global and layer-wise pruning strategies are compared, and two-phase pruning method is proposed. The proposed pruning method can achieve a reduction of 88% filters and 46% inference time reduction on VGG16 within 2% accuracy degradation. In this dissertation, we are going to investigate hardware/software co-design for neural network accelerator. Specifically, we introduce a two-phase filter pruning framework for model compres- sion and an accelerator tailored for efficient DNN execution on HMC, which can dynamically offload the primitives and functions to PIM logic layer through a latency-aware scheduling con- troller. In our compression framework, we formulate filter pruning process as an optimization problem and propose a filter selection criterion measured by conditional entropy. The key idea of our proposed approach is to establish a quantitative connection between filters and model accuracy. We define the connection as conditional entropy over filters in a convolutional layer, i.e., distribution of entropy conditioned on network loss. Based on the definition, different pruning efficiencies of global and layer-wise pruning strategies are compared, and two-phase pruning method is proposed. The proposed pruning method can achieve a reduction of 88% filters and 46% inference time reduction on VGG16 within 2% accuracy degradation

Selected Papers from the First International Symposium on Future ICT (Future-ICT 2019) in Conjunction with 4th International Symposium on Mobile Internet Security (MobiSec 2019)

The International Symposium on Future ICT (Future-ICT 2019) in conjunction with the 4th International Symposium on Mobile Internet Security (MobiSec 2019) was held on 17–19 October 2019 in Taichung, Taiwan. The symposium provided academic and industry professionals an opportunity to discuss the latest issues and progress in advancing smart applications based on future ICT and its relative security. The symposium aimed to publish high-quality papers strictly related to the various theories and practical applications concerning advanced smart applications, future ICT, and related communications and networks. It was expected that the symposium and its publications would be a trigger for further related research and technology improvements in this field

A Survey on the Integration of NAND Flash Storage in the Design of File Systems and the Host Storage Software Stack

With the ever-increasing amount of data generate in the world, estimated to reach over 200 Zettabytes by 2025, pressure on efficient data storage systems is intensifying. The shift from HDD to flash-based SSD provides one of the most fundamental shifts in storage technology, increasing performance capabilities significantly. However, flash storage comes with different characteristics than prior HDD storage technology. Therefore, storage software was unsuitable for leveraging the capabilities of flash storage. As a result, a plethora of storage applications have been design to better integrate with flash storage and align with flash characteristics. In this literature study we evaluate the effect the introduction of flash storage has had on the design of file systems, which providing one of the most essential mechanisms for managing persistent storage. We analyze the mechanisms for effectively managing flash storage, managing overheads of introduced design requirements, and leverage the capabilities of flash storage. Numerous methods have been adopted in file systems, however prominently revolve around similar design decisions, adhering to the flash hardware constrains, and limiting software intervention. Future design of storage software remains prominent with the constant growth in flash-based storage devices and interfaces, providing an increasing possibility to enhance flash integration in the host storage software stack

A Survey on the Integration of NAND Flash Storage in the Design of File Systems and the Host Storage Software Stack

With the ever-increasing amount of data generate in the world, estimated to reach over 200 Zettabytes by 2025, pressure on efficient data storage systems is intensifying. The shift from HDD to flash-based SSD provides one of the most fundamental shifts in storage technology, increasing performance capabilities significantly. However, flash storage comes with different characteristics than prior HDD storage technology. Therefore, storage software was unsuitable for leveraging the capabilities of flash storage. As a result, a plethora of storage applications have been design to better integrate with flash storage and align with flash characteristics. In this literature study we evaluate the effect the introduction of flash storage has had on the design of file systems, which providing one of the most essential mechanisms for managing persistent storage. We analyze the mechanisms for effectively managing flash storage, managing overheads of introduced design requirements, and leverage the capabilities of flash storage. Numerous methods have been adopted in file systems, however prominently revolve around similar design decisions, adhering to the flash hardware constrains, and limiting software intervention. Future design of storage software remains prominent with the constant growth in flash-based storage devices and interfaces, providing an increasing possibility to enhance flash integration in the host storage software stack