Design of testbed and emulation tools

The research summarized was concerned with the design of testbed and emulation tools suitable to assist in projecting, with reasonable accuracy, the expected performance of highly concurrent computing systems on large, complete applications. Such testbed and emulation tools are intended for the eventual use of those exploring new concurrent system architectures and organizations, either as users or as designers of such systems. While a range of alternatives was considered, a software based set of hierarchical tools was chosen to provide maximum flexibility, to ease in moving to new computers as technology improves and to take advantage of the inherent reliability and availability of commercially available computing systems

Scalable parallel communications

Coarse-grain parallelism in networking (that is, the use of multiple protocol processors running replicated software sending over several physical channels) can be used to provide gigabit communications for a single application. Since parallel network performance is highly dependent on real issues such as hardware properties (e.g., memory speeds and cache hit rates), operating system overhead (e.g., interrupt handling), and protocol performance (e.g., effect of timeouts), we have performed detailed simulations studies of both a bus-based multiprocessor workstation node (based on the Sun Galaxy MP multiprocessor) and a distributed-memory parallel computer node (based on the Touchstone DELTA) to evaluate the behavior of coarse-grain parallelism. Our results indicate: (1) coarse-grain parallelism can deliver multiple 100 Mbps with currently available hardware platforms and existing networking protocols (such as Transmission Control Protocol/Internet Protocol (TCP/IP) and parallel Fiber Distributed Data Interface (FDDI) rings); (2) scale-up is near linear in n, the number of protocol processors, and channels (for small n and up to a few hundred Mbps); and (3) since these results are based on existing hardware without specialized devices (except perhaps for some simple modifications of the FDDI boards), this is a low cost solution to providing multiple 100 Mbps on current machines. In addition, from both the performance analysis and the properties of these architectures, we conclude: (1) multiple processors providing identical services and the use of space division multiplexing for the physical channels can provide better reliability than monolithic approaches (it also provides graceful degradation and low-cost load balancing); (2) coarse-grain parallelism supports running several transport protocols in parallel to provide different types of service (for example, one TCP handles small messages for many users, other TCP's running in parallel provide high bandwidth service to a single application); and (3) coarse grain parallelism will be able to incorporate many future improvements from related work (e.g., reduced data movement, fast TCP, fine-grain parallelism) also with near linear speed-ups

System configuration and executive requirements specifications for reusable shuttle and space station/base

System configuration and executive requirements specifications for reusable shuttle and space station/bas

A study of aspects of synchronisation and communication in certain parallel computer architectures

This paper examines methods for synchronisation and communication between tasks in highly parallel arrays of processors. The development of various methods is researched and simulation techniques are applied to specific structures, to examine their effectiveness. Two approaches to simulation are presented, in the first case a discrete event simulator is applied to task synchronisation implemented with semaphores in a close coupled environment. Secondly the concurrent programming language Occam is used to simulate a systolic configuration of processors. In this case the design is verified, through actual system construction. Conclusions are drawn regarding the design disciplines and structure imposed by the use of these simulation techniques. A close relationship is found between the behaviour of a simulation written in Occam and the same structure constructed from multiple processors. Further research is suggested into the subject of dataflow processors, to find suitable means for simulating such systems, prior to implementation. A type of test vehicle is proposed that would operate a dataflow processor under the control of the development system

An experimental multiprocessor system for distributed parallel computations.

The availability of low-cost microprocessor chips with efficient instruction sets for specific numerical tasks (signal processors) has been exploited for building a versatile multiprocessor system, consisting of a host minicomputer augmented by a number of joint processors. The host provides a multiuser-multitasking environment and manages system resources and task scheduling. User applications can call upon one or more joint processors for parallel execution of adequately partitioned, computationally intensive numeric operations. Each joint processor has sufficient local memory for storing procedures and data and has access to regions in host memory for shared data. Kernel processes in the host and in the joint processors provide the necessary mechanism for initialization and synchronization of the distributed parallel execution of procedures

Parallel processing and expert systems

Whether it be monitoring the thermal subsystem of Space Station Freedom, or controlling the navigation of the autonomous rover on Mars, NASA missions in the 1990s cannot enjoy an increased level of autonomy without the efficient implementation of expert systems. Merely increasing the computational speed of uniprocessors may not be able to guarantee that real-time demands are met for larger systems. Speedup via parallel processing must be pursued alongside the optimization of sequential implementations. Prototypes of parallel expert systems have been built at universities and industrial laboratories in the U.S. and Japan. The state-of-the-art research in progress related to parallel execution of expert systems is surveyed. The survey discusses multiprocessors for expert systems, parallel languages for symbolic computations, and mapping expert systems to multiprocessors. Results to date indicate that the parallelism achieved for these systems is small. The main reasons are (1) the body of knowledge applicable in any given situation and the amount of computation executed by each rule firing are small, (2) dividing the problem solving process into relatively independent partitions is difficult, and (3) implementation decisions that enable expert systems to be incrementally refined hamper compile-time optimization. In order to obtain greater speedups, data parallelism and application parallelism must be exploited

Advanced manned space flight simulation and training: An investigation of simulation host computer system concepts

The findings of a preliminary investigation by Southwest Research Institute (SwRI) in simulation host computer concepts is presented. It is designed to aid NASA in evaluating simulation technologies for use in spaceflight training. The focus of the investigation is on the next generation of space simulation systems that will be utilized in training personnel for Space Station Freedom operations. SwRI concludes that NASA should pursue a distributed simulation host computer system architecture for the Space Station Training Facility (SSTF) rather than a centralized mainframe based arrangement. A distributed system offers many advantages and is seen by SwRI as the only architecture that will allow NASA to achieve established functional goals and operational objectives over the life of the Space Station Freedom program. Several distributed, parallel computing systems are available today that offer real-time capabilities for time critical, man-in-the-loop simulation. These systems are flexible in terms of connectivity and configurability, and are easily scaled to meet increasing demands for more computing power

Digital signal conditioning on multiprocessor systems

An important application area of modem computer systems is that of digital signal processing. This discipline is concerned with the analysis or modification of digitally represented signals, through the use of simple mathematical operations. A primary need of such systems is that of high data throughput. Although optimised programmable processors are available, system designers are now looking towards parallel processing to gain further performance increases. Such parallel systems may be easily constructed using the transputer family of processors. However, although these devices are comparatively easy to program, they possess a general von Neumann core and so are relatively inefficient at implementing digital signal processing algorithms. The power of the transputer lies in its ability to communicate effectively, not in its computational capability. The converse is true of specialised digital signal processors. These devices have been designed specifically to implement the type of small data intensive operations required by digital signal processing algorithms, but have not been designed to operate efficiently in a multiprocessor environment. This thesis examines the performance of both types of processors with reference to a common signal processing application, multichannel filtering. The transputer is examined in both uniprocessor and multiprocessor configurations, and its performance analysed. A theoretical model of program behaviour is developed, in order to assess the performance benefits of particular code structures and the effects of such parameters as data block size. The transputer implementation is contrasted with that of the Motorola DSP56001 digital signal processor. This device is found to be much more efficient at implementing such algorithms on a single device, but provides limited multiprocessor support. Using the conclusions of this assessment, a hybrid multiprocessor has been designed. This consists of a transputer controlling a number of signal processors, communicating through shared memory, separating tiie tasks of computation and communication. Forcing the transputer to communicate through shared memory causes problems, and these have been addressed. A theoretical performance model of the system has been produced. A small system has been constructed, and is currently running performance test software